| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1483050455-10683-3-git-send-email-steve_longerbeam@mentor.com>
Date: Thu, 29 Dec 2016 14:27:17 -0800
From: Steve Longerbeam <slongerbeam@...il.com>
To: shawnguo@...nel.org, kernel@...gutronix.de, fabio.estevam@....com,
robh+dt@...nel.org, mark.rutland@....com, linux@...linux.org.uk,
linus.walleij@...aro.org, gnurou@...il.com, mchehab@...nel.org,
gregkh@...uxfoundation.org, p.zabel@...gutronix.de
Cc: linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org,
linux-media@...r.kernel.org, devel@...verdev.osuosl.org,
Steve Longerbeam <steve_longerbeam@...tor.com>
Subject: [PATCH 02/20] ARM: dts: imx6qdl: Add mipi_ipu1/2 multiplexers, mipi_csi, and their connections
From: Philipp Zabel <p.zabel@...gutronix.de>
This patch adds the device tree graph connecting the input multiplexers
to the IPU CSIs and the MIPI-CSI2 gasket on i.MX6. The MIPI_IPU
multiplexers are added as children of the iomuxc-gpr syscon device node.
On i.MX6Q/D two two-input multiplexers in front of IPU1 CSI0 and IPU2
CSI1 allow to select between CSI0/1 parallel input pads and the MIPI
CSI-2 virtual channels 0/3.
On i.MX6DL/S two five-input multiplexers in front of IPU1 CSI0 and IPU1
CSI1 allow to select between CSI0/1 parallel input pads and any of the
four MIPI CSI-2 virtual channels.
Signed-off-by: Philipp Zabel <p.zabel@...gutronix.de>
- Removed some dangling/unused endpoints (ipu2_csi0_from_csi2ipu)
- Renamed the mipi virtual channel endpoint labels, from "mipi_csiX_..."
to "mipi_vcX...".
- Added input endpoints to the video muxes for the connections from parallel
sensors.
- Added input endpoints to the mipi_csi for the connections from mipi csi-2
sensors.
- The video multiplexer node has compatible string "imx-video-mux" instead
of "video-multiplexer".
- The video multiplexer node indicates GPR register via reg propert only,
(register offset and bitmask), instead of specifying with "bit-mask" and
"bit-shift" properties.
Signed-off-by: Steve Longerbeam <steve_longerbeam@...tor.com>
---
arch/arm/boot/dts/imx6dl.dtsi | 183 +++++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/imx6q.dtsi | 119 +++++++++++++++++++++++++++
arch/arm/boot/dts/imx6qdl.dtsi | 10 ++-
3 files changed, 311 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 1ade195..0a1718c 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -181,6 +181,189 @@
"di0", "di1";
};
+&gpr {
+ ipu1_csi0_mux: ipu1_csi0_mux@34 {
+ compatible = "imx-video-mux";
+ reg = <0x34 0x07>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ ipu1_csi0_mux_from_mipi_vc0: endpoint {
+ remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ipu1_csi0_mux_from_mipi_vc1: endpoint {
+ remote-endpoint = <&mipi_vc1_to_ipu1_csi0_mux>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ ipu1_csi0_mux_from_mipi_vc2: endpoint {
+ remote-endpoint = <&mipi_vc2_to_ipu1_csi0_mux>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ ipu1_csi0_mux_from_mipi_vc3: endpoint {
+ remote-endpoint = <&mipi_vc3_to_ipu1_csi0_mux>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+
+ ipu1_csi0_mux_from_parallel_sensor: endpoint {
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+
+ ipu1_csi0_mux_to_ipu1_csi0: endpoint {
+ remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>;
+ };
+ };
+ };
+
+ ipu1_csi1_mux: ipu1_csi1_mux@34 {
+ compatible = "imx-video-mux";
+ reg = <0x34 0x38>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ ipu1_csi1_mux_from_mipi_vc0: endpoint {
+ remote-endpoint = <&mipi_vc0_to_ipu1_csi1_mux>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ipu1_csi1_mux_from_mipi_vc1: endpoint {
+ remote-endpoint = <&mipi_vc1_to_ipu1_csi1_mux>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ ipu1_csi1_mux_from_mipi_vc2: endpoint {
+ remote-endpoint = <&mipi_vc2_to_ipu1_csi1_mux>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ ipu1_csi1_mux_from_mipi_vc3: endpoint {
+ remote-endpoint = <&mipi_vc3_to_ipu1_csi1_mux>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+
+ ipu1_csi1_mux_from_parallel_sensor: endpoint {
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+
+ ipu1_csi1_mux_to_ipu1_csi1: endpoint {
+ remote-endpoint = <&ipu1_csi1_from_ipu1_csi1_mux>;
+ };
+ };
+ };
+};
+
+&ipu1_csi1 {
+ ipu1_csi1_from_ipu1_csi1_mux: endpoint {
+ remote-endpoint = <&ipu1_csi1_mux_to_ipu1_csi1>;
+ };
+};
+
+&mipi_csi {
+ port@0 {
+ reg = <0>;
+
+ mipi_csi_from_mipi_sensor: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_vc0_to_ipu1_csi0_mux: endpoint@0 {
+ remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
+ };
+
+ mipi_vc0_to_ipu1_csi1_mux: endpoint@1 {
+ remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc0>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_vc1_to_ipu1_csi0_mux: endpoint@0 {
+ remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc1>;
+ };
+
+ mipi_vc1_to_ipu1_csi1_mux: endpoint@1 {
+ remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc1>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_vc2_to_ipu1_csi0_mux: endpoint@0 {
+ remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc2>;
+ };
+
+ mipi_vc2_to_ipu1_csi1_mux: endpoint@1 {
+ remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc2>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mipi_vc3_to_ipu1_csi0_mux: endpoint@0 {
+ remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc3>;
+ };
+
+ mipi_vc3_to_ipu1_csi1_mux: endpoint@1 {
+ remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc3>;
+ };
+ };
+};
+
&vpu {
compatible = "fsl,imx6dl-vpu", "cnm,coda960";
};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index e9a5d0b..56a314f 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -143,10 +143,18 @@
ipu2_csi0: port@0 {
reg = <0>;
+
+ ipu2_csi0_from_mipi_vc2: endpoint {
+ remote-endpoint = <&mipi_vc2_to_ipu2_csi0>;
+ };
};
ipu2_csi1: port@1 {
reg = <1>;
+
+ ipu2_csi1_from_ipu2_csi1_mux: endpoint {
+ remote-endpoint = <&ipu2_csi1_mux_to_ipu2_csi1>;
+ };
};
ipu2_di0: port@2 {
@@ -266,6 +274,76 @@
};
};
+&gpr {
+ ipu1_csi0_mux: ipu1_csi0_mux@4 {
+ compatible = "imx-video-mux";
+ reg = <0x04 0x80000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ ipu1_csi0_mux_from_mipi_vc0: endpoint {
+ remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ipu1_csi0_mux_from_parallel_sensor: endpoint {
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ ipu1_csi0_mux_to_ipu1_csi0: endpoint {
+ remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>;
+ };
+ };
+ };
+
+ ipu2_csi1_mux: ipu2_csi1_mux@4 {
+ compatible = "imx-video-mux";
+ reg = <0x04 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ ipu2_csi1_mux_from_mipi_vc3: endpoint {
+ remote-endpoint = <&mipi_vc3_to_ipu2_csi1_mux>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ ipu2_csi1_mux_from_parallel_sensor: endpoint {
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ ipu2_csi1_mux_to_ipu2_csi1: endpoint {
+ remote-endpoint = <&ipu2_csi1_from_ipu2_csi1_mux>;
+ };
+ };
+ };
+};
+
+&ipu1_csi1 {
+ ipu1_csi1_from_mipi_vc1: endpoint {
+ remote-endpoint = <&mipi_vc1_to_ipu1_csi1>;
+ };
+};
+
&ldb {
clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
<&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
@@ -312,6 +390,47 @@
};
};
+&mipi_csi {
+ port@0 {
+ reg = <0>;
+
+ mipi_csi_from_mipi_sensor: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mipi_vc0_to_ipu1_csi0_mux: endpoint {
+ remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ mipi_vc1_to_ipu1_csi1: endpoint {
+ remote-endpoint = <&ipu1_csi1_from_mipi_vc1>;
+ };
+ };
+
+ port@3 {
+ reg = <3>;
+
+ mipi_vc2_to_ipu2_csi0: endpoint {
+ remote-endpoint = <&ipu2_csi0_from_mipi_vc2>;
+ };
+ };
+
+ port@4 {
+ reg = <4>;
+
+ mipi_vc3_to_ipu2_csi1_mux: endpoint {
+ remote-endpoint = <&ipu2_csi1_mux_from_mipi_vc3>;
+ };
+ };
+};
+
&mipi_dsi {
ports {
port@2 {
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 7b546e3..89218a4 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -799,8 +799,10 @@
};
gpr: iomuxc-gpr@...e0000 {
- compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
+ compatible = "fsl,imx6q-iomuxc-gpr", "syscon", "simple-mfd";
reg = <0x020e0000 0x38>;
+ #address-cells = <1>;
+ #size-cells = <0>;
};
iomuxc: iomuxc@...e0000 {
@@ -1127,6 +1129,8 @@
mipi_csi: mipi@...dc000 {
compatible = "fsl,imx-mipi-csi2";
reg = <0x021dc000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
interrupts = <0 100 0x04>, <0 101 0x04>;
clocks = <&clks IMX6QDL_CLK_HSI_TX>,
<&clks IMX6QDL_CLK_VIDEO_27M>,
@@ -1232,6 +1236,10 @@
ipu1_csi0: port@0 {
reg = <0>;
+
+ ipu1_csi0_from_ipu1_csi0_mux: endpoint {
+ remote-endpoint = <&ipu1_csi0_mux_to_ipu1_csi0>;
+ };
};
ipu1_csi1: port@1 {
--
2.7.4
Powered by blists - more mailing lists