linux-kernel - [PATCH v2 4/6] usb: phy: qcom-8x16-usb: Replace the extcon API

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-id: <1483070895-8213-5-git-send-email-cw00.choi@samsung.com>
Date:   Fri, 30 Dec 2016 13:08:13 +0900
From:   Chanwoo Choi <cw00.choi@...sung.com>
To:     balbi@...nel.org, gregkh@...uxfoundation.org
Cc:     linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org,
        linux-omap@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
        chanwoo@...nel.org, Chanwoo Choi <cw00.choi@...sung.com>
Subject: [PATCH v2 4/6] usb: phy: qcom-8x16-usb: Replace the extcon API

This patch uses the resource-managed extcon API for extcon_register_notifier()
and replaces the deprecated extcon API as following:
- extcon_get_cable_state_() -> extcon_get_state()

Signed-off-by: Chanwoo Choi <cw00.choi@...sung.com>
Acked-by: Felipe Balbi <felipe.balbi@...ux.intel.com>
---
 drivers/usb/phy/phy-qcom-8x16-usb.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/phy/phy-qcom-8x16-usb.c b/drivers/usb/phy/phy-qcom-8x16-usb.c
index d8593adb3621..fdf686398772 100644
--- a/drivers/usb/phy/phy-qcom-8x16-usb.c
+++ b/drivers/usb/phy/phy-qcom-8x16-usb.c
@@ -187,7 +187,7 @@ static int phy_8x16_init(struct usb_phy *phy)
 	val = ULPI_PWR_OTG_COMP_DISABLE;
 	usb_phy_io_write(phy, val, ULPI_SET(ULPI_PWR_CLK_MNG_REG));
 
-	state = extcon_get_cable_state_(qphy->vbus_edev, EXTCON_USB);
+	state = extcon_get_state(qphy->vbus_edev, EXTCON_USB);
 	if (state)
 		phy_8x16_vbus_on(qphy);
 	else
@@ -316,23 +316,20 @@ static int phy_8x16_probe(struct platform_device *pdev)
 		goto off_clks;
 
 	qphy->vbus_notify.notifier_call = phy_8x16_vbus_notify;
-	ret = extcon_register_notifier(qphy->vbus_edev, EXTCON_USB,
-				       &qphy->vbus_notify);
+	ret = devm_extcon_register_notifier(&pdev->dev, qphy->vbus_edev,
+					EXTCON_USB, &qphy->vbus_notify);
 	if (ret < 0)
 		goto off_power;
 
 	ret = usb_add_phy_dev(&qphy->phy);
 	if (ret)
-		goto off_extcon;
+		goto off_power;
 
 	qphy->reboot_notify.notifier_call = phy_8x16_reboot_notify;
 	register_reboot_notifier(&qphy->reboot_notify);
 
 	return 0;
 
-off_extcon:
-	extcon_unregister_notifier(qphy->vbus_edev, EXTCON_USB,
-				   &qphy->vbus_notify);
 off_power:
 	regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator);
 off_clks:
@@ -347,8 +344,6 @@ static int phy_8x16_remove(struct platform_device *pdev)
 	struct phy_8x16 *qphy = platform_get_drvdata(pdev);
 
 	unregister_reboot_notifier(&qphy->reboot_notify);
-	extcon_unregister_notifier(qphy->vbus_edev, EXTCON_USB,
-				   &qphy->vbus_notify);
 
 	/*
 	 * Ensure that D+/D- lines are routed to uB connector, so
-- 
1.9.1