[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1483085240-16102-1-git-send-email-kishon@ti.com>
Date: Fri, 30 Dec 2016 13:37:20 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: BenoƮt Cousson <bcousson@...libre.com>,
Tony Lindgren <tony@...mide.com>, <linux-omap@...r.kernel.org>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
CC: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Russell King <linux@...linux.org.uk>, <nsekhar@...com>,
<kishon@...com>
Subject: [PATCH] ARM: dts: am572x-idk: Add gpios property to control PCIE_RESETn
Add 'gpios' property to pcie1 dt node and populate it with
GPIO3_23 in order to drive PCIE_RESETn high.
This gets PCIe cards to be detected in AM572X IDK board.
Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
---
arch/arm/boot/dts/am572x-idk.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index 27d9149..1540f7a 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -87,3 +87,7 @@
&sn65hvs882 {
load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
};
+
+&pcie1 {
+ gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
--
1.7.9.5
Powered by blists - more mailing lists