[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ff876454-b49f-3d63-d76e-012dd303b0e7@osg.samsung.com>
Date: Tue, 3 Jan 2017 09:15:29 -0300
From: Javier Martinez Canillas <javier@....samsung.com>
To: Andi Shyti <andi.shyti@...sung.com>,
Chanwoo Choi <cwchoi00@...il.com>
Cc: Krzysztof Kozlowski <krzk@...nel.org>,
Jaechul Lee <jcsing.lee@...sung.com>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
Kukjin Kim <kgene@...nel.org>,
Chanwoo Choi <cw00.choi@...sung.com>, beomho.seo@...sung.com,
galaxyra@...il.com,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
linux-input@...r.kernel.org,
devicetree <devicetree@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
linux-samsung-soc <linux-samsung-soc@...r.kernel.org>
Subject: Re: [PATCH 3/4] arm64: dts: exynos: make tm2 and tm2e independent
from each other
Hello Andi,
On 01/03/2017 08:55 AM, Andi Shyti wrote:
> Hi Chanwoo,
>
>>>>>>> Currently tm2e dts includes tm2 but there are some differences
>>>>>>> between the two boards and tm2 has some properties that tm2e
>>>>>>> doesn't have.
>>>>>>>
>>>>>>> That's why it's important to keep the two dts files independent
>>>>>>> and put all the commonalities in a tm2-common.dtsi file.
>>>>>>>
>>>>>>> Signed-off-by: Andi Shyti <andi.shyti@...sung.com>
>>>>>>> Signed-off-by: Jaechul Lee <jcsing.lee@...sung.com>
>>>>>>> ---
>>>>>>> .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 1046 ++++++++++++++++++++
>>>>>>> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1033 +------------------
>>>>>>> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 2 +-
>>>>>>> 3 files changed, 1049 insertions(+), 1032 deletions(-)
>>>>>>> create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
>>>>>>
>
> [...]
>
>>> Because exynos5433-tm2.dts results modified, while
>>> exynos5433-tm2-common.dtsi is new. Even though I did:
>>>
>>> 1. mv exynos5433-tm2.dts exynos5433-tm2-common.dtsi
>>> 2. copied pieces from exynos5433-tm2-common.dtsi to a new
>>> exynos5433-tm2.dts
>>
>> I think that exynos5433-tm2-common.dtsi is not necessary because there
>> is small difference between TM2 and TM2E.
>>
>> I explain the detailed difference between TM2 and TM2E and then reply
>> how to support the TM2E board with existing exynos5433-tm2.dts file
>> without exynos5433-tm2-common.dtsi.
>>
>> Difference and the way to support TM2E with existing
>> exynos5433-tm2.dts file as following:
>> - hsi2c_9 is either used or not. TM2 uses the hsi2c_9 node for
>> touchkey. but TM2E do not use the hsi2c_9.
>> : We can just disable the hsi2c_9 node on tm2e.dts as following:
>>
>> &hsi2c_9 {
>> status = "disable";
>> };
>
> I thought about this alternative too, it just looked cleaner to
> me to have a tm2-common.dtsi file.
>
> Anyway, as you guys wish. If for you and Krzysztof is better this
> way, we can drop this patch and add the above lines in the current
> Jaechul's patch 4/4.
>
FWIW, I also agree with Chanwoo that the difference is too small to
need a common .dtsi file.
> Thanks,
> Andi
>
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
Powered by blists - more mailing lists