[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20170103174906.GB27589@dell>
Date: Tue, 3 Jan 2017 17:49:06 +0000
From: Lee Jones <lee.jones@...aro.org>
To: Andrew Jeffery <andrew@...id.au>
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Linus Walleij <linus.walleij@...aro.org>,
Corey Minyard <minyard@....org>,
Cédric Le Goater <clg@...d.org>,
Joel Stanley <joel@....id.au>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 4/6] mfd: dt: Add bindings for the Aspeed LPC Host
Controller (LHC)
On Tue, 06 Dec 2016, Andrew Jeffery wrote:
> The LPC bus pinmux configuration on fifth generation Aspeed SoCs depends
> on bits in both the System Control Unit and the LPC Host Controller.
>
> The Aspeed LPC Host Controller is described as a child node of the
> LPC host-range syscon device for arbitration of access by the host
> controller and pinmux drivers.
>
> Signed-off-by: Andrew Jeffery <andrew@...id.au>
Applied with Acks, thanks.
> ---
> .../devicetree/bindings/mfd/aspeed-lpc.txt | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
> index a97131aba446..9de318ef72da 100644
> --- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
> +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
> @@ -109,3 +109,25 @@ lpc: lpc@...89000 {
> };
> };
>
> +Host Node Children
> +==================
> +
> +LPC Host Controller
> +-------------------
> +
> +The Aspeed LPC Host Controller configures the Low Pin Count (LPC) bus behaviour
> +between the host and the baseboard management controller. The registers exist
> +in the "host" portion of the Aspeed LPC controller, which must be the parent of
> +the LPC host controller node.
> +
> +Required properties:
> +- compatible: "aspeed,ast2500-lhc";
> +- reg: contains offset/length value of the LHC memory
> + region.
> +
> +Example:
> +
> +lhc: lhc@20 {
> + compatible = "aspeed,ast2500-lhc";
> + reg = <0x20 0x24 0x48 0x8>;
> +};
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists