| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1483467027-14547-10-git-send-email-will.deacon@arm.com>
Date: Tue, 3 Jan 2017 18:10:26 +0000
From: Will Deacon <will.deacon@....com>
To: linux-arm-kernel@...ts.infradead.org
Cc: marc.zyngier@....com, mark.rutland@....com, kim.phillips@....com,
alex.bennee@...aro.org, christoffer.dall@...aro.org,
tglx@...utronix.de, peterz@...radead.org,
alexander.shishkin@...ux.intel.com, robh@...nel.org,
suzuki.poulose@....com, pawel.moll@....com,
mathieu.poirier@...aro.org, mingo@...hat.com,
linux-kernel@...r.kernel.org, Will Deacon <will.deacon@....com>
Subject: [RFC PATCH 09/10] drivers/perf: Add support for ARMv8.2 Statistical Profiling Extension
The ARMv8.2 architecture introduces the Statistical Profiling Extension
(SPE). SPE provides a way to configure and collect profiling samples
from the CPU in the form of a trace buffer, which can be mapped directly
into userspace using the perf AUX buffer infrastructure.
This patch adds support for SPE in the form of a new perf driver.
Cc: Mark Rutland <mark.rutland@....com>
Cc: Alexander Shishkin <alexander.shishkin@...ux.intel.com>
Signed-off-by: Will Deacon <will.deacon@....com>
---
drivers/perf/Kconfig | 8 +
drivers/perf/Makefile | 1 +
drivers/perf/arm_spe_pmu.c | 1247 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 1256 insertions(+)
create mode 100644 drivers/perf/arm_spe_pmu.c
diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
index 4d5c5f9f0dbd..32b9d2756b0e 100644
--- a/drivers/perf/Kconfig
+++ b/drivers/perf/Kconfig
@@ -19,4 +19,12 @@ config XGENE_PMU
help
Say y if you want to use APM X-Gene SoC performance monitors.
+config ARM_SPE_PMU
+ tristate "Enable support for the ARMv8.2 Statistical Profiling Extension"
+ depends on PERF_EVENTS && ARM64
+ help
+ Enable perf support for the ARMv8.2 Statistical Profiling
+ Extension, which provides periodic sampling of operations in
+ the CPU pipeline and reports this via the perf AUX interface.
+
endmenu
diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
index b116e982810b..3a324da7d360 100644
--- a/drivers/perf/Makefile
+++ b/drivers/perf/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_ARM_PMU) += arm_pmu.o
obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
+obj-$(CONFIG_ARM_SPE_PMU) += arm_spe_pmu.o
diff --git a/drivers/perf/arm_spe_pmu.c b/drivers/perf/arm_spe_pmu.c
new file mode 100644
index 000000000000..88ac10aa24ac
--- /dev/null
+++ b/drivers/perf/arm_spe_pmu.c
@@ -0,0 +1,1247 @@
+/*
+ * Perf support for the Statistical Profiling Extension, introduced as
+ * part of ARMv8.2.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Copyright (C) 2016 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@....com>
+ */
+
+#define DRVNAME "arm_spe_pmu"
+#define pr_fmt(fmt) DRVNAME ": " fmt
+
+#include <linux/cpuhotplug.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/perf_event.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <asm/sysreg.h>
+
+/* ID registers */
+#define PMSIDR_EL1 sys_reg(3, 0, 9, 9, 7)
+#define PMSIDR_EL1_FE_SHIFT 0
+#define PMSIDR_EL1_FT_SHIFT 1
+#define PMSIDR_EL1_FL_SHIFT 2
+#define PMSIDR_EL1_ARCHINST_SHIFT 3
+#define PMSIDR_EL1_LDS_SHIFT 4
+#define PMSIDR_EL1_ERND_SHIFT 5
+#define PMSIDR_EL1_INTERVAL_SHIFT 8
+#define PMSIDR_EL1_INTERVAL_MASK 0xfUL
+#define PMSIDR_EL1_MAXSIZE_SHIFT 12
+#define PMSIDR_EL1_MAXSIZE_MASK 0xfUL
+#define PMSIDR_EL1_COUNTSIZE_SHIFT 16
+#define PMSIDR_EL1_COUNTSIZE_MASK 0xfUL
+
+#define PMBIDR_EL1 sys_reg(3, 0, 9, 10, 7)
+#define PMBIDR_EL1_ALIGN_SHIFT 0
+#define PMBIDR_EL1_ALIGN_MASK 0xfU
+#define PMBIDR_EL1_P_SHIFT 4
+#define PMBIDR_EL1_F_SHIFT 5
+
+/* Sampling controls */
+#define PMSCR_EL1 sys_reg(3, 0, 9, 9, 0)
+#define PMSCR_EL1_E0SPE_SHIFT 0
+#define PMSCR_EL1_E1SPE_SHIFT 1
+#define PMSCR_EL1_CX_SHIFT 3
+#define PMSCR_EL1_PA_SHIFT 4
+#define PMSCR_EL1_TS_SHIFT 5
+#define PMSCR_EL1_PCT_SHIFT 6
+
+#define PMSICR_EL1 sys_reg(3, 0, 9, 9, 2)
+
+#define PMSIRR_EL1 sys_reg(3, 0, 9, 9, 3)
+#define PMSIRR_EL1_RND_SHIFT 0
+#define PMSIRR_EL1_IVAL_MASK 0xffUL
+
+/* Filtering controls */
+#define PMSFCR_EL1 sys_reg(3, 0, 9, 9, 4)
+#define PMSFCR_EL1_FE_SHIFT 0
+#define PMSFCR_EL1_FT_SHIFT 1
+#define PMSFCR_EL1_FL_SHIFT 2
+#define PMSFCR_EL1_B_SHIFT 16
+#define PMSFCR_EL1_LD_SHIFT 17
+#define PMSFCR_EL1_ST_SHIFT 18
+
+#define PMSEVFR_EL1 sys_reg(3, 0, 9, 9, 5)
+#define PMSEVFR_EL1_RES0 0x0000ffff00ff0f55UL
+
+#define PMSLATFR_EL1 sys_reg(3, 0, 9, 9, 6)
+#define PMSLATFR_EL1_MINLAT_SHIFT 0
+
+/* Buffer controls */
+#define PMBLIMITR_EL1 sys_reg(3, 0, 9, 10, 0)
+#define PMBLIMITR_EL1_E_SHIFT 0
+#define PMBLIMITR_EL1_FM_SHIFT 1
+#define PMBLIMITR_EL1_FM_MASK 0x3UL
+#define PMBLIMITR_EL1_FM_STOP_IRQ (0 << PMBLIMITR_EL1_FM_SHIFT)
+
+#define PMBPTR_EL1 sys_reg(3, 0, 9, 10, 1)
+
+/* Buffer error reporting */
+#define PMBSR_EL1 sys_reg(3, 0, 9, 10, 3)
+#define PMBSR_EL1_COLL_SHIFT 16
+#define PMBSR_EL1_S_SHIFT 17
+#define PMBSR_EL1_EA_SHIFT 18
+#define PMBSR_EL1_DL_SHIFT 19
+#define PMBSR_EL1_EC_SHIFT 26
+#define PMBSR_EL1_EC_MASK 0x3fUL
+
+#define PMBSR_EL1_EC_BUF (0x0UL << PMBSR_EL1_EC_SHIFT)
+#define PMBSR_EL1_EC_FAULT_S1 (0x24UL << PMBSR_EL1_EC_SHIFT)
+#define PMBSR_EL1_EC_FAULT_S2 (0x25UL << PMBSR_EL1_EC_SHIFT)
+
+#define PMBSR_EL1_FAULT_FSC_SHIFT 0
+#define PMBSR_EL1_FAULT_FSC_MASK 0x3fUL
+
+#define PMBSR_EL1_BUF_BSC_SHIFT 0
+#define PMBSR_EL1_BUF_BSC_MASK 0x3fUL
+
+#define PMBSR_EL1_BUF_BSC_FULL (0x1UL << PMBSR_EL1_BUF_BSC_SHIFT)
+
+#define psb_csync() asm volatile("hint #17")
+
+struct arm_spe_pmu_buf {
+ int nr_pages;
+ bool snapshot;
+ void *base;
+};
+
+struct arm_spe_pmu {
+ struct pmu pmu;
+ struct platform_device *pdev;
+ cpumask_t supported_cpus;
+ struct hlist_node hotplug_node;
+
+ int irq; /* PPI */
+
+ u16 min_period;
+ u16 cnt_width;
+
+#define SPE_PMU_FEAT_FILT_EVT (1UL << 0)
+#define SPE_PMU_FEAT_FILT_TYP (1UL << 1)
+#define SPE_PMU_FEAT_FILT_LAT (1UL << 2)
+#define SPE_PMU_FEAT_ARCH_INST (1UL << 3)
+#define SPE_PMU_FEAT_LDS (1UL << 4)
+#define SPE_PMU_FEAT_ERND (1UL << 5)
+#define SPE_PMU_FEAT_DEV_PROBED (1UL << 63)
+ u64 features;
+
+ u16 max_record_sz;
+ u16 align;
+ struct perf_output_handle __percpu *handle;
+};
+
+#define to_spe_pmu(p) (container_of(p, struct arm_spe_pmu, pmu))
+
+/* Convert a free-running index from perf into an SPE buffer offset */
+#define PERF_IDX2OFF(idx, buf) ((idx) & (((buf)->nr_pages << PAGE_SHIFT) - 1))
+
+/* Convert a limit register into an SPE buffer offset */
+#define PMBLIMITR2OFF(lim, buf) (((lim) & PAGE_MASK) - (u64)((buf)->base))
+
+/* Keep track of our dynamic hotplug state */
+static enum cpuhp_state arm_spe_pmu_online;
+
+/* This sysfs gunk was really good fun to write. */
+enum arm_spe_pmu_capabilities {
+ SPE_PMU_CAP_ARCH_INST = 0,
+ SPE_PMU_CAP_ERND,
+ SPE_PMU_CAP_FEAT_MAX,
+ SPE_PMU_CAP_CNT_SZ = SPE_PMU_CAP_FEAT_MAX,
+ SPE_PMU_CAP_MIN_IVAL,
+};
+
+static int arm_spe_pmu_feat_caps[SPE_PMU_CAP_FEAT_MAX] = {
+ [SPE_PMU_CAP_ARCH_INST] = SPE_PMU_FEAT_ARCH_INST,
+ [SPE_PMU_CAP_ERND] = SPE_PMU_FEAT_ERND,
+};
+
+static u32 arm_spe_pmu_cap_get(struct arm_spe_pmu *spe_pmu, int cap)
+{
+ if (cap < SPE_PMU_CAP_FEAT_MAX)
+ return !!(spe_pmu->features & arm_spe_pmu_feat_caps[cap]);
+
+ switch (cap) {
+ case SPE_PMU_CAP_CNT_SZ:
+ return spe_pmu->cnt_width;
+ case SPE_PMU_CAP_MIN_IVAL:
+ return spe_pmu->min_period;
+ default:
+ WARN(1, "unknown cap %d\n", cap);
+ }
+
+ return 0;
+}
+
+static ssize_t arm_spe_pmu_cap_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct arm_spe_pmu *spe_pmu = platform_get_drvdata(pdev);
+ struct dev_ext_attribute *ea =
+ container_of(attr, struct dev_ext_attribute, attr);
+ int cap = (long)ea->var;
+
+ return snprintf(buf, PAGE_SIZE, "%u\n",
+ arm_spe_pmu_cap_get(spe_pmu, cap));
+}
+
+#define SPE_EXT_ATTR_ENTRY(_name, _func, _var) \
+ &((struct dev_ext_attribute[]) { \
+ { __ATTR(_name, S_IRUGO, _func, NULL), (void *)_var } \
+ })[0].attr.attr
+
+#define SPE_CAP_EXT_ATTR_ENTRY(_name, _var) \
+ SPE_EXT_ATTR_ENTRY(_name, arm_spe_pmu_cap_show, _var)
+
+static struct attribute *arm_spe_pmu_cap_attr[] = {
+ SPE_CAP_EXT_ATTR_ENTRY(arch_inst, SPE_PMU_CAP_ARCH_INST),
+ SPE_CAP_EXT_ATTR_ENTRY(ernd, SPE_PMU_CAP_ERND),
+ SPE_CAP_EXT_ATTR_ENTRY(count_size, SPE_PMU_CAP_CNT_SZ),
+ SPE_CAP_EXT_ATTR_ENTRY(min_interval, SPE_PMU_CAP_MIN_IVAL),
+ NULL,
+};
+
+static struct attribute_group arm_spe_pmu_cap_group = {
+ .name = "caps",
+ .attrs = arm_spe_pmu_cap_attr,
+};
+
+/* User ABI */
+#define ATTR_CFG_FLD_ts_enable_CFG config /* PMSCR_EL1.TS */
+#define ATTR_CFG_FLD_ts_enable_LO 0
+#define ATTR_CFG_FLD_ts_enable_HI 0
+#define ATTR_CFG_FLD_pa_enable_CFG config /* PMSCR_EL1.PA */
+#define ATTR_CFG_FLD_pa_enable_LO 1
+#define ATTR_CFG_FLD_pa_enable_HI 1
+#define ATTR_CFG_FLD_jitter_CFG config /* PMSIRR_EL1.RND */
+#define ATTR_CFG_FLD_jitter_LO 16
+#define ATTR_CFG_FLD_jitter_HI 16
+#define ATTR_CFG_FLD_branch_filter_CFG config /* PMSFCR_EL1.B */
+#define ATTR_CFG_FLD_branch_filter_LO 32
+#define ATTR_CFG_FLD_branch_filter_HI 32
+#define ATTR_CFG_FLD_load_filter_CFG config /* PMSFCR_EL1.LD */
+#define ATTR_CFG_FLD_load_filter_LO 33
+#define ATTR_CFG_FLD_load_filter_HI 33
+#define ATTR_CFG_FLD_store_filter_CFG config /* PMSFCR_EL1.ST */
+#define ATTR_CFG_FLD_store_filter_LO 34
+#define ATTR_CFG_FLD_store_filter_HI 34
+
+#define ATTR_CFG_FLD_event_filter_CFG config1 /* PMSEVFR_EL1 */
+#define ATTR_CFG_FLD_event_filter_LO 0
+#define ATTR_CFG_FLD_event_filter_HI 63
+
+#define ATTR_CFG_FLD_min_latency_CFG config2 /* PMSLATFR_EL1.MINLAT */
+#define ATTR_CFG_FLD_min_latency_LO 0
+#define ATTR_CFG_FLD_min_latency_HI 11
+
+/* Why does everything I do descend into this? */
+#define __GEN_PMU_FORMAT_ATTR(cfg, lo, hi) \
+ (lo) == (hi) ? #cfg ":" #lo "\n" : #cfg ":" #lo "-" #hi
+
+#define _GEN_PMU_FORMAT_ATTR(cfg, lo, hi) \
+ __GEN_PMU_FORMAT_ATTR(cfg, lo, hi)
+
+#define GEN_PMU_FORMAT_ATTR(name) \
+ PMU_FORMAT_ATTR(name, \
+ _GEN_PMU_FORMAT_ATTR(ATTR_CFG_FLD_##name##_CFG, \
+ ATTR_CFG_FLD_##name##_LO, \
+ ATTR_CFG_FLD_##name##_HI))
+
+#define _ATTR_CFG_GET_FLD(attr, cfg, lo, hi) \
+ ((((attr)->cfg) >> lo) & GENMASK(hi - lo, 0))
+
+#define ATTR_CFG_GET_FLD(attr, name) \
+ _ATTR_CFG_GET_FLD(attr, \
+ ATTR_CFG_FLD_##name##_CFG, \
+ ATTR_CFG_FLD_##name##_LO, \
+ ATTR_CFG_FLD_##name##_HI)
+
+GEN_PMU_FORMAT_ATTR(ts_enable);
+GEN_PMU_FORMAT_ATTR(pa_enable);
+GEN_PMU_FORMAT_ATTR(jitter);
+GEN_PMU_FORMAT_ATTR(load_filter);
+GEN_PMU_FORMAT_ATTR(store_filter);
+GEN_PMU_FORMAT_ATTR(branch_filter);
+GEN_PMU_FORMAT_ATTR(event_filter);
+GEN_PMU_FORMAT_ATTR(min_latency);
+
+static struct attribute *arm_spe_pmu_formats_attr[] = {
+ &format_attr_ts_enable.attr,
+ &format_attr_pa_enable.attr,
+ &format_attr_jitter.attr,
+ &format_attr_load_filter.attr,
+ &format_attr_store_filter.attr,
+ &format_attr_branch_filter.attr,
+ &format_attr_event_filter.attr,
+ &format_attr_min_latency.attr,
+ NULL,
+};
+
+static struct attribute_group arm_spe_pmu_format_group = {
+ .name = "format",
+ .attrs = arm_spe_pmu_formats_attr,
+};
+
+static ssize_t arm_spe_pmu_get_attr_cpumask(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct arm_spe_pmu *spe_pmu = platform_get_drvdata(pdev);
+
+ return cpumap_print_to_pagebuf(true, buf, &spe_pmu->supported_cpus);
+}
+static DEVICE_ATTR(cpumask, S_IRUGO, arm_spe_pmu_get_attr_cpumask, NULL);
+
+static struct attribute *arm_spe_pmu_attrs[] = {
+ &dev_attr_cpumask.attr,
+ NULL,
+};
+
+static struct attribute_group arm_spe_pmu_group = {
+ .attrs = arm_spe_pmu_attrs,
+};
+
+static const struct attribute_group *arm_spe_pmu_attr_groups[] = {
+ &arm_spe_pmu_group,
+ &arm_spe_pmu_cap_group,
+ &arm_spe_pmu_format_group,
+ NULL,
+};
+
+/* Convert between user ABI and register values */
+static u64 arm_spe_event_to_pmscr(struct perf_event *event)
+{
+ struct perf_event_attr *attr = &event->attr;
+ u64 reg = 0;
+
+ reg |= ATTR_CFG_GET_FLD(attr, ts_enable) << PMSCR_EL1_TS_SHIFT;
+ reg |= ATTR_CFG_GET_FLD(attr, pa_enable) << PMSCR_EL1_PA_SHIFT;
+
+ if (!attr->exclude_user)
+ reg |= BIT(PMSCR_EL1_E0SPE_SHIFT);
+
+ if (!attr->exclude_kernel)
+ reg |= BIT(PMSCR_EL1_E1SPE_SHIFT);
+
+ if (IS_ENABLED(CONFIG_PID_IN_CONTEXTIDR))
+ reg |= BIT(PMSCR_EL1_CX_SHIFT);
+
+ return reg;
+}
+
+static void arm_spe_event_sanitise_period(struct perf_event *event)
+{
+ struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
+ u64 period = event->hw.sample_period & ~PMSIRR_EL1_IVAL_MASK;
+
+ if (period < spe_pmu->min_period)
+ period = spe_pmu->min_period;
+
+ event->hw.sample_period = period;
+}
+
+static u64 arm_spe_event_to_pmsirr(struct perf_event *event)
+{
+ struct perf_event_attr *attr = &event->attr;
+ u64 reg = 0;
+
+ arm_spe_event_sanitise_period(event);
+
+ reg |= ATTR_CFG_GET_FLD(attr, jitter) << PMSIRR_EL1_RND_SHIFT;
+ reg |= event->hw.sample_period;
+
+ return reg;
+}
+
+static u64 arm_spe_event_to_pmsfcr(struct perf_event *event)
+{
+ struct perf_event_attr *attr = &event->attr;
+ u64 reg = 0;
+
+ reg |= ATTR_CFG_GET_FLD(attr, load_filter) << PMSFCR_EL1_LD_SHIFT;
+ reg |= ATTR_CFG_GET_FLD(attr, store_filter) << PMSFCR_EL1_ST_SHIFT;
+ reg |= ATTR_CFG_GET_FLD(attr, branch_filter) << PMSFCR_EL1_B_SHIFT;
+
+ if (reg)
+ reg |= BIT(PMSFCR_EL1_FT_SHIFT);
+
+ if (ATTR_CFG_GET_FLD(attr, event_filter))
+ reg |= BIT(PMSFCR_EL1_FE_SHIFT);
+
+ if (ATTR_CFG_GET_FLD(attr, min_latency))
+ reg |= BIT(PMSFCR_EL1_FL_SHIFT);
+
+ return reg;
+}
+
+static u64 arm_spe_event_to_pmsevfr(struct perf_event *event)
+{
+ struct perf_event_attr *attr = &event->attr;
+ return ATTR_CFG_GET_FLD(attr, event_filter);
+}
+
+static u64 arm_spe_event_to_pmslatfr(struct perf_event *event)
+{
+ struct perf_event_attr *attr = &event->attr;
+ return ATTR_CFG_GET_FLD(attr, min_latency) << PMSLATFR_EL1_MINLAT_SHIFT;
+}
+
+static bool arm_spe_pmu_buffer_mgmt_pending(u64 pmbsr)
+{
+ const char *err_str;
+
+ /* Service required? */
+ if (!(pmbsr & BIT(PMBSR_EL1_S_SHIFT)))
+ return false;
+
+ /* We only expect buffer management events */
+ switch (pmbsr & (PMBSR_EL1_EC_MASK << PMBSR_EL1_EC_SHIFT)) {
+ case PMBSR_EL1_EC_BUF:
+ /* Handled below */
+ break;
+ case PMBSR_EL1_EC_FAULT_S1:
+ case PMBSR_EL1_EC_FAULT_S2:
+ err_str = "Unexpected buffer fault";
+ goto out_err;
+ default:
+ err_str = "Unknown error code";
+ goto out_err;
+ }
+
+ /* Buffer management event */
+ switch (pmbsr & (PMBSR_EL1_BUF_BSC_MASK << PMBSR_EL1_BUF_BSC_SHIFT)) {
+ case PMBSR_EL1_BUF_BSC_FULL:
+ return true;
+ default:
+ err_str = "Unknown buffer status code";
+ }
+
+out_err:
+ pr_err_ratelimited("%s on CPU %d [PMBSR=0x%08llx]\n", err_str,
+ smp_processor_id(), pmbsr);
+ return false;
+}
+
+static u64 arm_spe_pmu_next_snapshot_off(struct perf_output_handle *handle)
+{
+ struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
+ struct arm_spe_pmu *spe_pmu = to_spe_pmu(handle->event->pmu);
+ u64 head = PERF_IDX2OFF(handle->head, buf);
+ u64 limit = buf->nr_pages * PAGE_SIZE;
+
+ /*
+ * The trace format isn't parseable in reverse, so clamp
+ * the limit to half of the buffer size in snapshot mode
+ * so that the worst case is half a buffer of records, as
+ * opposed to a single record.
+ */
+ if (head < limit >> 1)
+ limit >>= 1;
+
+ /*
+ * If we're within max_record_sz of the limit, we must
+ * pad, move the head index and recompute the limit.
+ */
+ if (limit - head < spe_pmu->max_record_sz) {
+ memset(buf->base + head, 0, limit - head);
+ handle->head = PERF_IDX2OFF(limit, buf);
+ limit = ((buf->nr_pages * PAGE_SIZE) >> 1) + handle->head;
+ }
+
+ return limit;
+}
+
+static u64 __arm_spe_pmu_next_off(struct perf_output_handle *handle)
+{
+ struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
+ u64 head = PERF_IDX2OFF(handle->head, buf);
+ u64 tail = PERF_IDX2OFF(handle->head + handle->size, buf);
+ u64 wakeup = PERF_IDX2OFF(handle->wakeup, buf);
+ u64 limit = buf->nr_pages * PAGE_SIZE;
+
+ /*
+ * Set the limit pointer to either the watermark or the
+ * current tail pointer; whichever comes first.
+ */
+ if (handle->head + handle->size <= handle->wakeup) {
+ /* The tail is next, so check for wrapping */
+ if (tail >= head) {
+ /*
+ * No wrapping, but need to align downwards to
+ * avoid corrupting unconsumed data.
+ */
+ limit = round_down(tail, PAGE_SIZE);
+
+ }
+ } else if (wakeup >= head) {
+ /*
+ * The wakeup is next and doesn't wrap. Align upwards to
+ * ensure that we do indeed reach the watermark.
+ */
+ limit = round_up(wakeup, PAGE_SIZE);
+
+ /*
+ * If rounding up crosses the tail, then we have to
+ * round down to avoid corrupting unconsumed data.
+ * Hopefully the tail will have moved by the time we
+ * hit the new limit.
+ */
+ if (wakeup < tail && limit > tail)
+ limit = round_down(wakeup, PAGE_SIZE);
+ }
+
+ /*
+ * If rounding down crosses the head, then the buffer is full,
+ * so pad to tail and end the session.
+ */
+ if (limit <= head) {
+ memset(buf->base + head, 0, handle->size);
+ perf_aux_output_skip(handle, handle->size);
+ perf_aux_output_end(handle, 0, PERF_AUX_FLAG_TRUNCATED);
+ limit = 0;
+ }
+
+ return limit;
+}
+
+static u64 arm_spe_pmu_next_off(struct perf_output_handle *handle)
+{
+ struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
+ struct arm_spe_pmu *spe_pmu = to_spe_pmu(handle->event->pmu);
+ u64 limit = __arm_spe_pmu_next_off(handle);
+ u64 head = PERF_IDX2OFF(handle->head, buf);
+
+ /*
+ * If the head has come too close to the end of the buffer,
+ * then pad to the end and recompute the limit.
+ */
+ if (limit && (limit - head < spe_pmu->max_record_sz)) {
+ memset(buf->base + head, 0, limit - head);
+ perf_aux_output_skip(handle, limit - head);
+ limit = __arm_spe_pmu_next_off(handle);
+ }
+
+ return limit;
+}
+
+static void arm_spe_perf_aux_output_begin(struct perf_output_handle *handle,
+ struct perf_event *event)
+{
+ u64 base, limit;
+ struct arm_spe_pmu_buf *buf;
+
+ /* Start a new aux session */
+ buf = perf_aux_output_begin(handle, event);
+ if (!buf) {
+ event->hw.state |= PERF_HES_STOPPED;
+ /*
+ * We still need to clear the limit pointer, since the
+ * profiler might only be disabled by virtue of a fault.
+ */
+ limit = 0;
+ goto out_write_limit;
+ }
+
+ limit = buf->snapshot ? arm_spe_pmu_next_snapshot_off(handle)
+ : arm_spe_pmu_next_off(handle);
+ if (limit)
+ limit |= BIT(PMBLIMITR_EL1_E_SHIFT);
+
+ base = (u64)buf->base + PERF_IDX2OFF(handle->head, buf);
+ write_sysreg_s(base, PMBPTR_EL1);
+ limit += (u64)buf->base;
+
+out_write_limit:
+ write_sysreg_s(limit, PMBLIMITR_EL1);
+}
+
+static bool arm_spe_perf_aux_output_end(struct perf_output_handle *handle,
+ struct perf_event *event,
+ bool resume)
+{
+ u64 pmbptr, pmbsr, offset, size;
+ struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
+ struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
+ bool truncated, collided;
+
+ /*
+ * We can be called via IRQ work trying to disable the PMU after
+ * a buffer full event. In this case, the aux session has already
+ * been stopped, so there's nothing to do here.
+ */
+ if (!buf)
+ return false;
+
+ /*
+ * Work out how much data has been written since the last update
+ * to the head index.
+ */
+ pmbptr = round_down(read_sysreg_s(PMBPTR_EL1), spe_pmu->align);
+ offset = pmbptr - (u64)buf->base;
+ size = offset - PERF_IDX2OFF(handle->head, buf);
+
+ if (buf->snapshot)
+ handle->head = offset;
+
+ /*
+ * If there isn't a pending management event and we're not stopping
+ * the current session, then just leave everything alone.
+ */
+ pmbsr = read_sysreg_s(PMBSR_EL1);
+ if (!arm_spe_pmu_buffer_mgmt_pending(pmbsr) && resume)
+ return false; /* Spurious IRQ */
+
+ /*
+ * Either the buffer is full or we're stopping the session. Check
+ * that we didn't write a partial record, since this can result
+ * in unparseable trace and we must disable the event.
+ */
+ collided = pmbsr & BIT(PMBSR_EL1_COLL_SHIFT);
+ truncated = pmbsr & BIT(PMBSR_EL1_DL_SHIFT);
+ perf_aux_output_end(handle, size,
+ (truncated ? PERF_AUX_FLAG_TRUNCATED : 0) |
+ (collided ? PERF_AUX_FLAG_COLLISION : 0));
+
+ /*
+ * If we're not resuming the session, then we can clear the fault
+ * and we're done, otherwise we need to start a new session.
+ */
+ if (!resume)
+ write_sysreg_s(0, PMBSR_EL1);
+ else if (!truncated)
+ arm_spe_perf_aux_output_begin(handle, event);
+
+ return true;
+}
+
+/* IRQ handling */
+static irqreturn_t arm_spe_pmu_irq_handler(int irq, void *dev)
+{
+ struct perf_output_handle *handle = dev;
+
+ if (!perf_get_aux(handle))
+ return IRQ_NONE;
+
+ if (!arm_spe_perf_aux_output_end(handle, handle->event, true))
+ return IRQ_NONE;
+
+ irq_work_run();
+ isb(); /* Ensure the buffer is disabled if data loss has occurred */
+ write_sysreg_s(0, PMBSR_EL1);
+ return IRQ_HANDLED;
+}
+
+/* Perf callbacks */
+static int arm_spe_pmu_event_init(struct perf_event *event)
+{
+ u64 reg;
+ struct perf_event_attr *attr = &event->attr;
+ struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
+
+ /* This is, of course, deeply driver-specific */
+ if (attr->type != event->pmu->type)
+ return -ENOENT;
+
+ if (event->cpu >= 0 &&
+ !cpumask_test_cpu(event->cpu, &spe_pmu->supported_cpus))
+ return -ENOENT;
+
+ if (arm_spe_event_to_pmsevfr(event) & PMSEVFR_EL1_RES0)
+ return -EOPNOTSUPP;
+
+ if (event->hw.sample_period < spe_pmu->min_period ||
+ event->hw.sample_period & PMSIRR_EL1_IVAL_MASK)
+ return -EOPNOTSUPP;
+
+ if (attr->exclude_idle)
+ return -EOPNOTSUPP;
+
+ /*
+ * Feedback-directed frequency throttling doesn't work when we
+ * have a buffer of samples. We'd need to manually count the
+ * samples in the buffer when it fills up and adjust the event
+ * count to reflect that. Instead, force the user to specify a
+ * sample period instead.
+ */
+ if (attr->freq)
+ return -EINVAL;
+
+ if (is_kernel_in_hyp_mode()) {
+ if (attr->exclude_kernel != attr->exclude_hv)
+ return -EOPNOTSUPP;
+ } else if (!attr->exclude_hv) {
+ return -EOPNOTSUPP;
+ }
+
+ reg = arm_spe_event_to_pmsfcr(event);
+ if ((reg & BIT(PMSFCR_EL1_FE_SHIFT)) &&
+ !(spe_pmu->features & SPE_PMU_FEAT_FILT_EVT))
+ return -EOPNOTSUPP;
+
+ if ((reg & BIT(PMSFCR_EL1_FT_SHIFT)) &&
+ !(spe_pmu->features & SPE_PMU_FEAT_FILT_TYP))
+ return -EOPNOTSUPP;
+
+ if ((reg & BIT(PMSFCR_EL1_FL_SHIFT)) &&
+ !(spe_pmu->features & SPE_PMU_FEAT_FILT_LAT))
+ return -EOPNOTSUPP;
+
+ return 0;
+}
+
+static void arm_spe_pmu_start(struct perf_event *event, int flags)
+{
+ u64 reg;
+ struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ struct perf_output_handle *handle = this_cpu_ptr(spe_pmu->handle);
+
+ hwc->state = 0;
+ arm_spe_perf_aux_output_begin(handle, event);
+ if (hwc->state)
+ return;
+
+ reg = arm_spe_event_to_pmsfcr(event);
+ write_sysreg_s(reg, PMSFCR_EL1);
+
+ reg = arm_spe_event_to_pmsevfr(event);
+ write_sysreg_s(reg, PMSEVFR_EL1);
+
+ reg = arm_spe_event_to_pmslatfr(event);
+ write_sysreg_s(reg, PMSLATFR_EL1);
+
+ if (flags & PERF_EF_RELOAD) {
+ reg = arm_spe_event_to_pmsirr(event);
+ write_sysreg_s(reg, PMSIRR_EL1);
+ isb();
+ reg = local64_read(&hwc->period_left);
+ write_sysreg_s(reg, PMSICR_EL1);
+ }
+
+ reg = arm_spe_event_to_pmscr(event);
+ isb();
+ write_sysreg_s(reg, PMSCR_EL1);
+}
+
+static void arm_spe_pmu_disable_and_drain_local(void)
+{
+ /* Disable profiling at EL0 and EL1 */
+ write_sysreg_s(0, PMSCR_EL1);
+ isb();
+
+ /* Drain any buffered data */
+ psb_csync();
+ dsb(nsh);
+
+ /* Disable the profiling buffer */
+ write_sysreg_s(0, PMBLIMITR_EL1);
+}
+
+static void arm_spe_pmu_stop(struct perf_event *event, int flags)
+{
+ struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ struct perf_output_handle *handle = this_cpu_ptr(spe_pmu->handle);
+
+ /* If we're already stopped, then nothing to do */
+ if (hwc->state & PERF_HES_STOPPED)
+ return;
+
+ /* Stop all trace generation */
+ arm_spe_pmu_disable_and_drain_local();
+
+ if (flags & PERF_EF_UPDATE) {
+ /* Ensure hardware updates to PMBPTR_EL1 are visible */
+ isb();
+ arm_spe_perf_aux_output_end(handle, event, false);
+ /*
+ * This may also contain ECOUNT, but nobody else should
+ * be looking at period_left, since we forbid frequency
+ * based sampling.
+ */
+ local64_set(&hwc->period_left, read_sysreg_s(PMSICR_EL1));
+ hwc->state |= PERF_HES_UPTODATE;
+ }
+
+ hwc->state |= PERF_HES_STOPPED;
+}
+
+static int arm_spe_pmu_add(struct perf_event *event, int flags)
+{
+ int ret = 0;
+ struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ int cpu = event->cpu == -1 ? smp_processor_id() : event->cpu;
+
+ if (!cpumask_test_cpu(cpu, &spe_pmu->supported_cpus))
+ return -ENOENT;
+
+ hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
+
+ if (flags & PERF_EF_START) {
+ arm_spe_pmu_start(event, PERF_EF_RELOAD);
+ if (hwc->state & PERF_HES_STOPPED)
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static void arm_spe_pmu_del(struct perf_event *event, int flags)
+{
+ arm_spe_pmu_stop(event, PERF_EF_UPDATE);
+}
+
+static void arm_spe_pmu_read(struct perf_event *event)
+{
+}
+
+static void *arm_spe_pmu_setup_aux(int cpu, void **pages, int nr_pages,
+ bool snapshot)
+{
+ int i;
+ struct page **pglist;
+ struct arm_spe_pmu_buf *buf;
+
+ /*
+ * We require an even number of pages for snapshot mode, so that
+ * we can effectively treat the buffer as consisting of two equal
+ * parts and give userspace a fighting chance of getting some
+ * useful data out of it.
+ */
+ if (!nr_pages || (snapshot && (nr_pages & 1)))
+ return NULL;
+
+ buf = kzalloc_node(sizeof(*buf), GFP_KERNEL, cpu_to_node(cpu));
+ if (!buf)
+ return NULL;
+
+ pglist = kcalloc(nr_pages, sizeof(*pglist), GFP_KERNEL);
+ if (!pglist)
+ goto out_free_buf;
+
+ for (i = 0; i < nr_pages; ++i) {
+ struct page *page = virt_to_page(pages[i]);
+
+ if (PagePrivate(page)) {
+ pr_warn("unexpected high-order page for auxbuf!");
+ goto out_free_pglist;
+ }
+
+ pglist[i] = virt_to_page(pages[i]);
+ }
+
+ buf->base = vmap(pglist, nr_pages, VM_MAP, PAGE_KERNEL);
+ if (!buf->base)
+ goto out_free_pglist;
+
+ buf->nr_pages = nr_pages;
+ buf->snapshot = snapshot;
+
+ kfree(pglist);
+ return buf;
+
+out_free_pglist:
+ kfree(pglist);
+out_free_buf:
+ kfree(buf);
+ return NULL;
+}
+
+static void arm_spe_pmu_free_aux(void *aux)
+{
+ struct arm_spe_pmu_buf *buf = aux;
+
+ vunmap(buf->base);
+ kfree(buf);
+}
+
+/* Initialisation and teardown functions */
+static int arm_spe_pmu_perf_init(struct arm_spe_pmu *spe_pmu)
+{
+ static atomic_t pmu_idx = ATOMIC_INIT(-1);
+
+ int idx;
+ char *name;
+ struct device *dev = &spe_pmu->pdev->dev;
+
+ spe_pmu->pmu = (struct pmu) {
+ .capabilities = PERF_PMU_CAP_EXCLUSIVE | PERF_PMU_CAP_ITRACE,
+ .attr_groups = arm_spe_pmu_attr_groups,
+ /*
+ * We hitch a ride on the software context here, so that
+ * we can support per-task profiling (which is not possible
+ * with the invalid context as it doesn't get sched callbacks).
+ * This requires that userspace either uses a dummy event for
+ * perf_event_open, since the aux buffer is not setup until
+ * a subsequent mmap, or creates the profiling event in a
+ * disabled state and explicitly PERF_EVENT_IOC_ENABLEs it
+ * once the buffer has been created.
+ */
+ .task_ctx_nr = perf_sw_context,
+ .event_init = arm_spe_pmu_event_init,
+ .add = arm_spe_pmu_add,
+ .del = arm_spe_pmu_del,
+ .start = arm_spe_pmu_start,
+ .stop = arm_spe_pmu_stop,
+ .read = arm_spe_pmu_read,
+ .setup_aux = arm_spe_pmu_setup_aux,
+ .free_aux = arm_spe_pmu_free_aux,
+ };
+
+ idx = atomic_inc_return(&pmu_idx);
+ name = devm_kasprintf(dev, GFP_KERNEL, "%s_%d", DRVNAME, idx);
+ return perf_pmu_register(&spe_pmu->pmu, name, -1);
+}
+
+static void arm_spe_pmu_perf_destroy(struct arm_spe_pmu *spe_pmu)
+{
+ perf_pmu_unregister(&spe_pmu->pmu);
+}
+
+static void __arm_spe_pmu_dev_probe(void *info)
+{
+ int fld;
+ u64 reg;
+ struct arm_spe_pmu *spe_pmu = info;
+ struct device *dev = &spe_pmu->pdev->dev;
+
+ fld = cpuid_feature_extract_unsigned_field(read_cpuid(ID_AA64DFR0_EL1),
+ ID_AA64DFR0_PMSVER_SHIFT);
+ if (!fld) {
+ dev_err(dev,
+ "unsupported ID_AA64DFR0_EL1.PMSVer [%d] on CPU %d\n",
+ fld, smp_processor_id());
+ return;
+ }
+
+ /* Read PMBIDR first to determine whether or not we have access */
+ reg = read_sysreg_s(PMBIDR_EL1);
+ if (reg & BIT(PMBIDR_EL1_P_SHIFT)) {
+ dev_err(dev,
+ "profiling buffer owned by higher exception level\n");
+ return;
+ }
+
+ /* Minimum alignment. If it's out-of-range, then fail the probe */
+ fld = reg >> PMBIDR_EL1_ALIGN_SHIFT & PMBIDR_EL1_ALIGN_MASK;
+ spe_pmu->align = 1 << fld;
+ if (spe_pmu->align > SZ_2K) {
+ dev_err(dev, "unsupported PMBIDR.Align [%d] on CPU %d\n",
+ fld, smp_processor_id());
+ return;
+ }
+
+ /* It's now safe to read PMSIDR and figure out what we've got */
+ reg = read_sysreg_s(PMSIDR_EL1);
+ if (reg & BIT(PMSIDR_EL1_FE_SHIFT))
+ spe_pmu->features |= SPE_PMU_FEAT_FILT_EVT;
+
+ if (reg & BIT(PMSIDR_EL1_FT_SHIFT))
+ spe_pmu->features |= SPE_PMU_FEAT_FILT_TYP;
+
+ if (reg & BIT(PMSIDR_EL1_FL_SHIFT))
+ spe_pmu->features |= SPE_PMU_FEAT_FILT_LAT;
+
+ if (reg & BIT(PMSIDR_EL1_ARCHINST_SHIFT))
+ spe_pmu->features |= SPE_PMU_FEAT_ARCH_INST;
+
+ if (reg & BIT(PMSIDR_EL1_LDS_SHIFT))
+ spe_pmu->features |= SPE_PMU_FEAT_LDS;
+
+ if (reg & BIT(PMSIDR_EL1_ERND_SHIFT))
+ spe_pmu->features |= SPE_PMU_FEAT_ERND;
+
+ /* This field has a spaced out encoding, so just use a look-up */
+ fld = reg >> PMSIDR_EL1_INTERVAL_SHIFT & PMSIDR_EL1_INTERVAL_MASK;
+ switch (fld) {
+ case 0:
+ spe_pmu->min_period = 256;
+ break;
+ case 2:
+ spe_pmu->min_period = 512;
+ break;
+ case 3:
+ spe_pmu->min_period = 768;
+ break;
+ case 4:
+ spe_pmu->min_period = 1024;
+ break;
+ case 5:
+ spe_pmu->min_period = 1536;
+ break;
+ case 6:
+ spe_pmu->min_period = 2048;
+ break;
+ case 7:
+ spe_pmu->min_period = 3072;
+ break;
+ default:
+ dev_warn(dev, "unknown PMSIDR_EL1.Interval [%d]; assuming 8\n",
+ fld);
+ /* Fallthrough */
+ case 8:
+ spe_pmu->min_period = 4096;
+ }
+
+ /* Maximum record size. If it's out-of-range, then fail the probe */
+ fld = reg >> PMSIDR_EL1_MAXSIZE_SHIFT & PMSIDR_EL1_MAXSIZE_MASK;
+ spe_pmu->max_record_sz = 1 << fld;
+ if (spe_pmu->max_record_sz > SZ_2K || spe_pmu->max_record_sz < 16) {
+ dev_err(dev, "unsupported PMSIDR_EL1.MaxSize [%d] on CPU %d\n",
+ fld, smp_processor_id());
+ return;
+ }
+
+ fld = reg >> PMSIDR_EL1_COUNTSIZE_SHIFT & PMSIDR_EL1_COUNTSIZE_MASK;
+ switch (fld) {
+ default:
+ dev_warn(dev, "unknown PMSIDR_EL1.CountSize [%d]; assuming 2\n",
+ fld);
+ /* Fallthrough */
+ case 2:
+ spe_pmu->cnt_width = 12;
+ }
+
+ dev_info(dev,
+ "probed for CPUs %*pbl [max_record_sz %u, align %u, features 0x%llx]\n",
+ cpumask_pr_args(&spe_pmu->supported_cpus),
+ spe_pmu->max_record_sz, spe_pmu->align, spe_pmu->features);
+
+ spe_pmu->features |= SPE_PMU_FEAT_DEV_PROBED;
+ return;
+}
+
+static void __arm_spe_pmu_reset_local(void)
+{
+ /*
+ * This is probably overkill, as we have no idea where we're
+ * draining any buffered data to...
+ */
+ arm_spe_pmu_disable_and_drain_local();
+
+ /* Reset the buffer base pointer */
+ write_sysreg_s(0, PMBPTR_EL1);
+ isb();
+
+ /* Clear any pending management interrupts */
+ write_sysreg_s(0, PMBSR_EL1);
+ isb();
+}
+
+static void __arm_spe_pmu_setup_one(void *info)
+{
+ struct arm_spe_pmu *spe_pmu = info;
+
+ __arm_spe_pmu_reset_local();
+ enable_percpu_irq(spe_pmu->irq, IRQ_TYPE_NONE);
+}
+
+static void __arm_spe_pmu_stop_one(void *info)
+{
+ struct arm_spe_pmu *spe_pmu = info;
+
+ disable_percpu_irq(spe_pmu->irq);
+ __arm_spe_pmu_reset_local();
+}
+
+static int arm_spe_pmu_cpu_startup(unsigned int cpu, struct hlist_node *node)
+{
+ struct arm_spe_pmu *spe_pmu;
+
+ spe_pmu = hlist_entry_safe(node, struct arm_spe_pmu, hotplug_node);
+ if (!cpumask_test_cpu(cpu, &spe_pmu->supported_cpus))
+ return 0;
+
+ __arm_spe_pmu_setup_one(spe_pmu);
+ return 0;
+}
+
+static int arm_spe_pmu_cpu_teardown(unsigned int cpu, struct hlist_node *node)
+{
+ struct arm_spe_pmu *spe_pmu;
+
+ spe_pmu = hlist_entry_safe(node, struct arm_spe_pmu, hotplug_node);
+ if (!cpumask_test_cpu(cpu, &spe_pmu->supported_cpus))
+ return 0;
+
+ __arm_spe_pmu_stop_one(spe_pmu);
+ return 0;
+}
+
+static int arm_spe_pmu_dev_init(struct arm_spe_pmu *spe_pmu)
+{
+ int ret;
+ cpumask_t *mask = &spe_pmu->supported_cpus;
+
+ /* Keep the hotplug state steady whilst we probe */
+ get_online_cpus();
+
+ /* Make sure we probe the hardware on a relevant CPU */
+ ret = smp_call_function_any(mask, __arm_spe_pmu_dev_probe, spe_pmu, 1);
+ if (ret || !(spe_pmu->features & SPE_PMU_FEAT_DEV_PROBED)) {
+ ret = -ENXIO;
+ goto out_put_cpus;
+ }
+
+ /* Request our PPIs (note that the IRQ is still disabled) */
+ ret = request_percpu_irq(spe_pmu->irq, arm_spe_pmu_irq_handler, DRVNAME,
+ spe_pmu->handle);
+ if (ret)
+ goto out_put_cpus;
+
+ /* Setup the CPUs in our mask -- this enables the IRQ */
+ on_each_cpu_mask(mask, __arm_spe_pmu_setup_one, spe_pmu, 1);
+
+ /* Register our hotplug notifier now so we don't miss any events */
+ ret = cpuhp_state_add_instance_nocalls(arm_spe_pmu_online,
+ &spe_pmu->hotplug_node);
+out_put_cpus:
+ put_online_cpus();
+ return ret;
+}
+
+/* Driver and device probing */
+static int arm_spe_pmu_irq_probe(struct arm_spe_pmu *spe_pmu)
+{
+ struct platform_device *pdev = spe_pmu->pdev;
+ int irq = platform_get_irq(pdev, 0);
+
+ if (irq < 0) {
+ dev_err(&pdev->dev, "failed to get IRQ (%d)\n", irq);
+ return -ENXIO;
+ }
+
+ if (!irq_is_percpu(irq)) {
+ dev_err(&pdev->dev, "expected PPI but got SPI (%d)\n", irq);
+ return -EINVAL;
+ }
+
+ if (irq_get_percpu_devid_partition(irq, &spe_pmu->supported_cpus)) {
+ dev_err(&pdev->dev, "failed to get PPI partition (%d)\n", irq);
+ return -EINVAL;
+ }
+
+ spe_pmu->irq = irq;
+ return 0;
+}
+
+static const struct of_device_id arm_spe_pmu_of_match[] = {
+ { .compatible = "arm,arm-spe-pmu-v1", .data = (void *)1 },
+};
+
+static int arm_spe_pmu_device_dt_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct arm_spe_pmu *spe_pmu;
+ struct device *dev = &pdev->dev;
+
+ spe_pmu = devm_kzalloc(dev, sizeof(*spe_pmu), GFP_KERNEL);
+ if (!spe_pmu) {
+ dev_err(dev, "failed to allocate spe_pmu\n");
+ return -ENOMEM;
+ }
+
+ spe_pmu->handle = alloc_percpu(typeof(*spe_pmu->handle));
+ if (!spe_pmu->handle)
+ return -ENOMEM;
+
+ spe_pmu->pdev = pdev;
+ platform_set_drvdata(pdev, spe_pmu);
+
+ ret = arm_spe_pmu_irq_probe(spe_pmu);
+ if (ret)
+ goto out_free_handle;
+
+ ret = arm_spe_pmu_dev_init(spe_pmu);
+ if (ret)
+ goto out_free_handle;
+
+ ret = arm_spe_pmu_perf_init(spe_pmu);
+ if (ret)
+ goto out_free_handle;
+
+ return 0;
+
+out_free_handle:
+ free_percpu(spe_pmu->handle);
+ return ret;
+}
+
+static int arm_spe_pmu_device_remove(struct platform_device *pdev)
+{
+ struct arm_spe_pmu *spe_pmu = platform_get_drvdata(pdev);
+ cpumask_t *mask = &spe_pmu->supported_cpus;
+
+ arm_spe_pmu_perf_destroy(spe_pmu);
+
+ get_online_cpus();
+ cpuhp_state_remove_instance_nocalls(arm_spe_pmu_online,
+ &spe_pmu->hotplug_node);
+ on_each_cpu_mask(mask, __arm_spe_pmu_stop_one, spe_pmu, 1);
+ free_percpu_irq(spe_pmu->irq, spe_pmu->handle);
+ free_percpu(spe_pmu->handle);
+ put_online_cpus();
+
+ return 0;
+}
+
+static struct platform_driver arm_spe_pmu_driver = {
+ .driver = {
+ .name = DRVNAME,
+ .of_match_table = of_match_ptr(arm_spe_pmu_of_match),
+ },
+ .probe = arm_spe_pmu_device_dt_probe,
+ .remove = arm_spe_pmu_device_remove,
+};
+
+static int __init arm_spe_pmu_init(void)
+{
+ int ret;
+
+ ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, DRVNAME,
+ arm_spe_pmu_cpu_startup,
+ arm_spe_pmu_cpu_teardown);
+ if (ret < 0)
+ return ret;
+ arm_spe_pmu_online = ret;
+
+ ret = platform_driver_register(&arm_spe_pmu_driver);
+ if (ret)
+ cpuhp_remove_multi_state(arm_spe_pmu_online);
+
+ return ret;
+}
+
+static void __exit arm_spe_pmu_exit(void)
+{
+ platform_driver_unregister(&arm_spe_pmu_driver);
+ cpuhp_remove_multi_state(arm_spe_pmu_online);
+}
+
+module_init(arm_spe_pmu_init);
+module_exit(arm_spe_pmu_exit);
+
+MODULE_DESCRIPTION("Perf driver for the ARMv8.2 Statistical Profiling Extension");
+MODULE_AUTHOR("Will Deacon <will.deacon@....com>");
+MODULE_LICENSE("GPL v2");
--
2.1.4
Powered by blists - more mailing lists