| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20170103233851.GA13952@roeck-us.net>
Date: Tue, 3 Jan 2017 15:38:51 -0800
From: Guenter Roeck <linux@...ck-us.net>
To: Andy Shevchenko <andy.shevchenko@...il.com>
Cc: Wim Van Sebroeck <wim@...ana.be>, linux-watchdog@...r.kernel.org,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Matt Fleming <matt.fleming@...el.com>
Subject: Re: [PATCH 2/4] watchdog: iTCO_wdt: Use device managed resources
On Wed, Jan 04, 2017 at 12:41:56AM +0200, Andy Shevchenko wrote:
> On Tue, Jan 3, 2017 at 4:39 PM, Guenter Roeck <linux@...ck-us.net> wrote:
> > Using device managed resources simplifies error handling and cleanup,
> > and to reduce the likelyhood of errors.
> >
> > Signed-off-by: Guenter Roeck <linux@...ck-us.net>
>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@...il.com>
>
> Does it make sense to convert to dev_err() at some point?
>
Sounds like an idea. Let me play with it.
Thanks,
Guenter
> > ---
> > drivers/watchdog/iTCO_wdt.c | 80 ++++++++++-----------------------------------
> > 1 file changed, 17 insertions(+), 63 deletions(-)
> >
> > diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
> > index a35a9164ccd0..eed1dee6de19 100644
> > --- a/drivers/watchdog/iTCO_wdt.c
> > +++ b/drivers/watchdog/iTCO_wdt.c
> > @@ -401,27 +401,6 @@ static const struct watchdog_ops iTCO_wdt_ops = {
> > * Init & exit routines
> > */
> >
> > -static void iTCO_wdt_cleanup(struct iTCO_wdt_private *p)
> > -{
> > - /* Stop the timer before we leave */
> > - if (!nowayout)
> > - iTCO_wdt_stop(&p->wddev);
> > -
> > - /* Deregister */
> > - watchdog_unregister_device(&p->wddev);
> > -
> > - /* release resources */
> > - release_region(p->tco_res->start,
> > - resource_size(p->tco_res));
> > - release_region(p->smi_res->start,
> > - resource_size(p->smi_res));
> > - if (p->iTCO_version >= 2) {
> > - iounmap(p->gcs_pmc);
> > - release_mem_region(p->gcs_pmc_res->start,
> > - resource_size(p->gcs_pmc_res));
> > - }
> > -}
> > -
> > static int iTCO_wdt_probe(struct platform_device *dev)
> > {
> > struct itco_wdt_platform_data *pdata = dev_get_platdata(&dev->dev);
> > @@ -458,41 +437,28 @@ static int iTCO_wdt_probe(struct platform_device *dev)
> > p->gcs_pmc_res = platform_get_resource(dev,
> > IORESOURCE_MEM,
> > ICH_RES_MEM_GCS_PMC);
> > -
> > - if (!p->gcs_pmc_res)
> > - return -ENODEV;
> > -
> > - if (!request_mem_region(p->gcs_pmc_res->start,
> > - resource_size(p->gcs_pmc_res),
> > - dev->name))
> > - return -EBUSY;
> > -
> > - p->gcs_pmc = ioremap(p->gcs_pmc_res->start,
> > - resource_size(p->gcs_pmc_res));
> > - if (!p->gcs_pmc) {
> > - ret = -EIO;
> > - goto unreg_gcs_pmc;
> > - }
> > + p->gcs_pmc = devm_ioremap_resource(&dev->dev, p->gcs_pmc_res);
> > + if (IS_ERR(p->gcs_pmc))
> > + return PTR_ERR(p->gcs_pmc);
> > }
> >
> > /* Check chipset's NO_REBOOT bit */
> > if (iTCO_wdt_unset_NO_REBOOT_bit(p) &&
> > iTCO_vendor_check_noreboot_on()) {
> > pr_info("unable to reset NO_REBOOT flag, device disabled by hardware/BIOS\n");
> > - ret = -ENODEV; /* Cannot reset NO_REBOOT bit */
> > - goto unmap_gcs_pmc;
> > + return -ENODEV; /* Cannot reset NO_REBOOT bit */
> > }
> >
> > /* Set the NO_REBOOT bit to prevent later reboots, just for sure */
> > iTCO_wdt_set_NO_REBOOT_bit(p);
> >
> > /* The TCO logic uses the TCO_EN bit in the SMI_EN register */
> > - if (!request_region(p->smi_res->start,
> > - resource_size(p->smi_res), dev->name)) {
> > + if (!devm_request_region(&dev->dev, p->smi_res->start,
> > + resource_size(p->smi_res),
> > + dev->name)) {
> > pr_err("I/O address 0x%04llx already in use, device disabled\n",
> > (u64)SMI_EN(p));
> > - ret = -EBUSY;
> > - goto unmap_gcs_pmc;
> > + return -EBUSY;
> > }
> > if (turn_SMI_watchdog_clear_off >= p->iTCO_version) {
> > /*
> > @@ -504,12 +470,12 @@ static int iTCO_wdt_probe(struct platform_device *dev)
> > outl(val32, SMI_EN(p));
> > }
> >
> > - if (!request_region(p->tco_res->start,
> > - resource_size(p->tco_res), dev->name)) {
> > + if (!devm_request_region(&dev->dev, p->tco_res->start,
> > + resource_size(p->tco_res),
> > + dev->name)) {
> > pr_err("I/O address 0x%04llx already in use, device disabled\n",
> > (u64)TCOBASE(p));
> > - ret = -EBUSY;
> > - goto unreg_smi;
> > + return -EBUSY;
> > }
> >
> > pr_info("Found a %s TCO device (Version=%d, TCOBASE=0x%04llx)\n",
> > @@ -555,37 +521,25 @@ static int iTCO_wdt_probe(struct platform_device *dev)
> > WATCHDOG_TIMEOUT);
> > }
> >
> > - ret = watchdog_register_device(&p->wddev);
> > + ret = devm_watchdog_register_device(&dev->dev, &p->wddev);
> > if (ret != 0) {
> > pr_err("cannot register watchdog device (err=%d)\n", ret);
> > - goto unreg_tco;
> > + return ret;
> > }
> >
> > pr_info("initialized. heartbeat=%d sec (nowayout=%d)\n",
> > heartbeat, nowayout);
> >
> > return 0;
> > -
> > -unreg_tco:
> > - release_region(p->tco_res->start, resource_size(p->tco_res));
> > -unreg_smi:
> > - release_region(p->smi_res->start, resource_size(p->smi_res));
> > -unmap_gcs_pmc:
> > - if (p->iTCO_version >= 2)
> > - iounmap(p->gcs_pmc);
> > -unreg_gcs_pmc:
> > - if (p->iTCO_version >= 2)
> > - release_mem_region(p->gcs_pmc_res->start,
> > - resource_size(p->gcs_pmc_res));
> > - return ret;
> > }
> >
> > static int iTCO_wdt_remove(struct platform_device *dev)
> > {
> > struct iTCO_wdt_private *p = platform_get_drvdata(dev);
> >
> > - if (p->tco_res || p->smi_res)
> > - iTCO_wdt_cleanup(p);
> > + /* Stop the timer before we leave */
> > + if (!nowayout)
> > + iTCO_wdt_stop(&p->wddev);
> >
> > return 0;
> > }
> > --
> > 2.7.4
> >
>
>
>
> --
> With Best Regards,
> Andy Shevchenko
> --
> To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists