| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20170104205536.15963-3-d-gerlach@ti.com>
Date: Wed, 4 Jan 2017 14:55:34 -0600
From: Dave Gerlach <d-gerlach@...com>
To: Ulf Hansson <ulf.hansson@...aro.org>,
"Rafael J . Wysocki" <rjw@...ysocki.net>,
Kevin Hilman <khilman@...nel.org>,
Rob Herring <robh+dt@...nel.org>
CC: <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-pm@...r.kernel.org>,
<devicetree@...r.kernel.org>, Nishanth Menon <nm@...com>,
Dave Gerlach <d-gerlach@...com>, Keerthy <j-keerthy@...com>,
Russell King <rmk+kernel@...linux.org.uk>,
Tero Kristo <t-kristo@...com>,
Sudeep Holla <sudeep.holla@....com>,
Santosh Shilimkar <ssantosh@...nel.org>,
Lokesh Vutla <lokeshvutla@...com>
Subject: [PATCH v3 2/4] dt-bindings: Add TI SCI PM Domains
Add a generic power domain implementation, TI SCI PM Domains, that
will hook into the genpd framework and allow the TI SCI protocol to
control device power states.
Also, provide macros representing each device index as understood
by TI SCI to be used in the device node power-domain references.
These are identifiers for the K2G devices managed by the PMMC.
Signed-off-by: Nishanth Menon <nm@...com>
Signed-off-by: Dave Gerlach <d-gerlach@...com>
---
v2->v3:
Update k2g_pds node docs to show it should be a child of pmmc node.
In early versions a phandle was used to point to pmmc and docs still
incorrectly showed this.
.../devicetree/bindings/soc/ti/sci-pm-domain.txt | 59 ++++++++++++++
MAINTAINERS | 2 +
include/dt-bindings/genpd/k2g.h | 90 ++++++++++++++++++++++
3 files changed, 151 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
create mode 100644 include/dt-bindings/genpd/k2g.h
diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
new file mode 100644
index 000000000000..4c9064e512cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
@@ -0,0 +1,59 @@
+Texas Instruments TI-SCI Generic Power Domain
+---------------------------------------------
+
+Some TI SoCs contain a system controller (like the PMMC, etc...) that is
+responsible for controlling the state of the IPs that are present.
+Communication between the host processor running an OS and the system
+controller happens through a protocol known as TI-SCI [1]. This pm domain
+implementation plugs into the generic pm domain framework and makes use of
+the TI SCI protocol power on and off each device when needed.
+
+[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
+
+PM Domain Node
+==============
+The PM domain node represents the global PM domain managed by the PMMC,
+which in this case is the single implementation as documented by the generic
+PM domain bindings in Documentation/devicetree/bindings/power/power_domain.txt.
+Because this relies on the TI SCI protocol to communicate with the PMMC it
+must be a child of the pmmc node.
+
+Required Properties:
+--------------------
+- compatible: should be "ti,sci-pm-domain"
+- #power-domain-cells: Must be 0.
+
+Example (K2G):
+-------------
+ pmmc: pmmc {
+ compatible = "ti,k2g-sci";
+ ...
+
+ k2g_pds: k2g_pds {
+ compatible = "ti,sci-pm-domain";
+ #power-domain-cells = <0>;
+ };
+ };
+
+PM Domain Consumers
+===================
+Hardware blocks that require SCI control over their state must provide
+a reference to the sci-pm-domain they are part of and a unique device
+specific ID that identifies the device.
+
+Required Properties:
+--------------------
+- power-domains: phandle pointing to the corresponding PM domain node.
+- ti,sci-id: index representing the device id to be passed oevr SCI to
+ be used for device control.
+
+See dt-bindings/genpd/k2g.h for the list of valid identifiers for k2g.
+
+Example (K2G):
+--------------------
+ uart0: serial@...30c00 {
+ compatible = "ns16550a";
+ ...
+ power-domains = <&k2g_pds>;
+ ti,sci-id = <K2G_DEV_UART0>;
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index cfff2c9e3d94..7e68af170dae 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12144,6 +12144,8 @@ S: Maintained
F: Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
F: drivers/firmware/ti_sci*
F: include/linux/soc/ti/ti_sci_protocol.h
+F: Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
+F: include/dt-bindings/genpd/k2g.h
THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
M: Hans Verkuil <hverkuil@...all.nl>
diff --git a/include/dt-bindings/genpd/k2g.h b/include/dt-bindings/genpd/k2g.h
new file mode 100644
index 000000000000..91ad827e0ca1
--- /dev/null
+++ b/include/dt-bindings/genpd/k2g.h
@@ -0,0 +1,90 @@
+/*
+ * TI K2G SoC Device definitions
+ *
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_GENPD_K2G_H
+#define _DT_BINDINGS_GENPD_K2G_H
+
+/* Documented in http://processors.wiki.ti.com/index.php/TISCI */
+
+#define K2G_DEV_PMMC0 0x0000
+#define K2G_DEV_MLB0 0x0001
+#define K2G_DEV_DSS0 0x0002
+#define K2G_DEV_MCBSP0 0x0003
+#define K2G_DEV_MCASP0 0x0004
+#define K2G_DEV_MCASP1 0x0005
+#define K2G_DEV_MCASP2 0x0006
+#define K2G_DEV_DCAN0 0x0008
+#define K2G_DEV_DCAN1 0x0009
+#define K2G_DEV_EMIF0 0x000a
+#define K2G_DEV_MMCHS0 0x000b
+#define K2G_DEV_MMCHS1 0x000c
+#define K2G_DEV_GPMC0 0x000d
+#define K2G_DEV_ELM0 0x000e
+#define K2G_DEV_SPI0 0x0010
+#define K2G_DEV_SPI1 0x0011
+#define K2G_DEV_SPI2 0x0012
+#define K2G_DEV_SPI3 0x0013
+#define K2G_DEV_ICSS0 0x0014
+#define K2G_DEV_ICSS1 0x0015
+#define K2G_DEV_USB0 0x0016
+#define K2G_DEV_USB1 0x0017
+#define K2G_DEV_NSS0 0x0018
+#define K2G_DEV_PCIE0 0x0019
+#define K2G_DEV_GPIO0 0x001b
+#define K2G_DEV_GPIO1 0x001c
+#define K2G_DEV_TIMER64_0 0x001d
+#define K2G_DEV_TIMER64_1 0x001e
+#define K2G_DEV_TIMER64_2 0x001f
+#define K2G_DEV_TIMER64_3 0x0020
+#define K2G_DEV_TIMER64_4 0x0021
+#define K2G_DEV_TIMER64_5 0x0022
+#define K2G_DEV_TIMER64_6 0x0023
+#define K2G_DEV_MSGMGR0 0x0025
+#define K2G_DEV_BOOTCFG0 0x0026
+#define K2G_DEV_ARM_BOOTROM0 0x0027
+#define K2G_DEV_DSP_BOOTROM0 0x0029
+#define K2G_DEV_DEBUGSS0 0x002b
+#define K2G_DEV_UART0 0x002c
+#define K2G_DEV_UART1 0x002d
+#define K2G_DEV_UART2 0x002e
+#define K2G_DEV_EHRPWM0 0x002f
+#define K2G_DEV_EHRPWM1 0x0030
+#define K2G_DEV_EHRPWM2 0x0031
+#define K2G_DEV_EHRPWM3 0x0032
+#define K2G_DEV_EHRPWM4 0x0033
+#define K2G_DEV_EHRPWM5 0x0034
+#define K2G_DEV_EQEP0 0x0035
+#define K2G_DEV_EQEP1 0x0036
+#define K2G_DEV_EQEP2 0x0037
+#define K2G_DEV_ECAP0 0x0038
+#define K2G_DEV_ECAP1 0x0039
+#define K2G_DEV_I2C0 0x003a
+#define K2G_DEV_I2C1 0x003b
+#define K2G_DEV_I2C2 0x003c
+#define K2G_DEV_EDMA0 0x003f
+#define K2G_DEV_SEMAPHORE0 0x0040
+#define K2G_DEV_INTC0 0x0041
+#define K2G_DEV_GIC0 0x0042
+#define K2G_DEV_QSPI0 0x0043
+#define K2G_DEV_ARM_64B_COUNTER0 0x0044
+#define K2G_DEV_TETRIS0 0x0045
+#define K2G_DEV_CGEM0 0x0046
+#define K2G_DEV_MSMC0 0x0047
+#define K2G_DEV_CBASS0 0x0049
+#define K2G_DEV_BOARD0 0x004c
+#define K2G_DEV_EDMA1 0x004f
+
+#endif
--
2.11.0
Powered by blists - more mailing lists