lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Wed, 4 Jan 2017 15:19:51 +0800 From: Peter Chen <peter.chen@....com> To: <myungjoo.ham@...sung.com>, <cw00.choi@...sung.com> CC: <rogerq@...com>, <linux-kernel@...r.kernel.org>, Peter Chen <peter.chen@....com> Subject: [PATCH v2 1/1] extcon: usb-gpio: add pinctrl operation during system PM At some systems, the pinctrl setting will be lost or needs to set as "sleep" state to save power consumption. So, we need to configure pinctrl as "sleep" state when system enters suspend, and as "default" state after system resumes. In this way, the pinctrl value can be recovered as "default" state after resuming. Signed-off-by: Peter Chen <peter.chen@....com> --- Changes for v2: - Add header file for pinctrl to avoid build error - Only set pin as "sleep" state when the wakeup is not requested drivers/extcon/extcon-usb-gpio.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c index d589c5f..a5e1882 100644 --- a/drivers/extcon/extcon-usb-gpio.c +++ b/drivers/extcon/extcon-usb-gpio.c @@ -27,6 +27,7 @@ #include <linux/slab.h> #include <linux/workqueue.h> #include <linux/acpi.h> +#include <linux/pinctrl/consumer.h> #define USB_GPIO_DEBOUNCE_MS 20 /* ms */ @@ -245,6 +246,9 @@ static int usb_extcon_suspend(struct device *dev) if (info->vbus_gpiod) disable_irq(info->vbus_irq); + if (!device_may_wakeup(dev)) + pinctrl_pm_select_sleep_state(dev); + return ret; } @@ -253,6 +257,9 @@ static int usb_extcon_resume(struct device *dev) struct usb_extcon_info *info = dev_get_drvdata(dev); int ret = 0; + if (!device_may_wakeup(dev)) + pinctrl_pm_select_default_state(dev); + if (device_may_wakeup(dev)) { if (info->id_gpiod) { ret = disable_irq_wake(info->id_irq); -- 2.7.4
Powered by blists - more mailing lists