| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1483536854-21389-3-git-send-email-srinivas.kandagatla@linaro.org>
Date: Wed, 4 Jan 2017 13:34:13 +0000
From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To: Andy Gross <andy.gross@...aro.org>
Cc: David Brown <david.brown@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Subject: [PATCH 3/4] ARM: dts: sd-600eval: enable 1.8v regulator on LS expansion
This patch enables 1.8v regulator on LS expansion, which should be
always on according to 96boards spec.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
---
arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
index 4e908af..40f7168 100644
--- a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts
@@ -132,6 +132,16 @@
bias-pull-down;
};
+ /**
+ * 1.8v required on LS expansion
+ * for mezzanine boards
+ */
+ l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
l23 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
--
2.10.1
Powered by blists - more mailing lists