linux-kernel - Re: [PATCH v3 2/2] dt-bindings: Add DT bindings info for FlexRM ring manager

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20170104143752.bl47gdfczbnfy6b3@rob-hp-laptop>
Date:   Wed, 4 Jan 2017 08:37:52 -0600
From:   Rob Herring <robh@...nel.org>
To:     Anup Patel <anup.patel@...adcom.com>
Cc:     Jassi Brar <jassisinghbrar@...il.com>,
        Mark Rutland <mark.rutland@....com>,
        Ray Jui <rjui@...adcom.com>,
        Scott Branden <sbranden@...adcom.com>,
        Pramod KUMAR <pramod.kumar@...adcom.com>,
        Rob Rice <rob.rice@...adcom.com>, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        bcm-kernel-feedback-list@...adcom.com
Subject: Re: [PATCH v3 2/2] dt-bindings: Add DT bindings info for FlexRM ring
 manager

On Wed, Jan 04, 2017 at 11:04:42AM +0530, Anup Patel wrote:
> This patch adds device tree bindings document for the FlexRM
> ring manager found on Broadcom iProc SoCs.
> 
> Reviewed-by: Ray Jui <ray.jui@...adcom.com>
> Reviewed-by: Scott Branden <scott.branden@...adcom.com>
> Signed-off-by: Anup Patel <anup.patel@...adcom.com>
> ---
>  .../bindings/mailbox/brcm,iproc-flexrm-mbox.txt    | 60 ++++++++++++++++++++++
>  1 file changed, 60 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
> 
> diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
> new file mode 100644
> index 0000000..ca51a39
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt
> @@ -0,0 +1,60 @@
> +Broadcom FlexRM Ring Manager
> +============================
> +The Broadcom FlexRM ring manager provides a set of rings which can be
> +used to submit work to offload engines. An SoC may have multiple FlexRM
> +hardware blocks. There is one device tree entry per FlexRM block. The
> +FlexRM driver will create a mailbox-controller instance for given FlexRM
> +hardware block where each mailbox channel is a separate FlexRM ring.
> +
> +Required properties:
> +--------------------
> +- compatible:	Should be "brcm,iproc-flexrm-mbox"
> +- reg:		Specifies base physical address and size of the FlexRM
> +		ring registers
> +- msi-parent:	Phandles (and potential Device IDs) to MSI controllers
> +		The FlexRM engine will send MSIs (instead of wired
> +		interrupts) to CPU. There is one MSI for each FlexRM ring.
> +		Refer devicetree/bindings/interrupt-controller/msi.txt
> +- #mbox-cells:	Specifies the number of cells needed to encode a mailbox
> +		channel. This should be 3.
> +
> +		The 1st cell is the mailbox channel number.
> +
> +		The 2nd cell contains MSI completion threshold. This is the
> +		number of completion messages for which FlexRM will inject
> +		one MSI interrupt to CPU.
> +
> +		The 3nd cell contains MSI timer value representing time for
> +		which FlexRM will wait to accumulate N completion messages
> +		where N is the value specified by 2nd cell above. If FlexRM
> +		does not get required number of completion messages in time
> +		specified by this cell then it will inject one MSI interrupt
> +		to CPU provided atleast one completion message is available.
> +
> +Optional properties:
> +--------------------
> +- dma-coherent:	Present if DMA operations made by the FlexRM engine (such
> +		as DMA descriptor access, access to buffers pointed by DMA
> +		descriptors and read/write pointer updates to DDR) are
> +		cache coherent with the CPU.
> +
> +Example:
> +--------
> +crypto_mbox: mbox@...00000 {
> +	compatible = "brcm,iproc-flexrm-mbox";
> +	reg = <0x67000000 0x200000>;
> +	msi-parent = <&gic_its 0x7f00>;
> +	#mbox-cells = <3>;
> +};
> +
> +crypto_client {

crypto@<addr>

> +	...
> +	mboxes = <&crypto_mbox 0 0x1 0xffff>,
> +		 <&crypto_mbox 1 0x1 0xffff>,
> +		 <&crypto_mbox 16 0x1 0xffff>,
> +		 <&crypto_mbox 17 0x1 0xffff>,
> +		 <&crypto_mbox 30 0x1 0xffff>,
> +		 <&crypto_mbox 31 0x1 0xffff>;
> +	};
> +	...

Please somewhat fully list the contents for node.

Rob