[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGb2v675_bbceTt0Jh++t-HeWfNqn=f4Pjf-HjbZvWvKkLtrdQ@mail.gmail.com>
Date: Thu, 5 Jan 2017 14:02:40 +0800
From: Chen-Yu Tsai <wens@...e.org>
To: Lee Jones <lee.jones@...aro.org>
Cc: Quentin Schulz <quentin.schulz@...e-electrons.com>,
Jonathan Cameron <jic23@...nel.org>, knaack.h@....de,
Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald-Stadler <pmeerw@...erw.net>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Chen-Yu Tsai <wens@...e.org>,
Sebastian Reichel <sre@...nel.org>,
Russell King <linux@...linux.org.uk>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
linux-iio@...r.kernel.org, devicetree <devicetree@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
"open list:THERMAL" <linux-pm@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
Icenowy Zheng <icenowy@...c.xyz>,
Bruno Prémont <bonbons@...ux-vserver.org>
Subject: Re: [PATCH 16/22] mfd: axp20x: add V_OFF to writeable regs for AXP20X
and AXP22X
On Wed, Jan 4, 2017 at 7:57 PM, Lee Jones <lee.jones@...aro.org> wrote:
> On Mon, 02 Jan 2017, Quentin Schulz wrote:
>
>> The V_OFF register has its first 3 read-write bits for the minimal
>> voltage (Voff) of the battery before the system is automatically shut
>> down due to the power being too low.
>>
>> This adds V_OFF register to the writeable registers of AXP20X and AXP22X
>> PMICs.
>>
>> Signed-off-by: Quentin Schulz <quentin.schulz@...e-electrons.com>
>> ---
>> drivers/mfd/axp20x.c | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> For my own reference:
> Acked-for-MFD-by: Lee Jones <lee.jones@...aro.org>
Acked-by: Chen-Yu Tsai <wens@...e.org>
>
>> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
>> index 19bdba3..7f0f05f 100644
>> --- a/drivers/mfd/axp20x.c
>> +++ b/drivers/mfd/axp20x.c
>> @@ -65,7 +65,7 @@ static const struct regmap_access_table axp152_volatile_table = {
>>
>> static const struct regmap_range axp20x_writeable_ranges[] = {
>> regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
>> - regmap_reg_range(AXP20X_VBUS_IPSOUT_MGMT, AXP20X_VBUS_IPSOUT_MGMT),
>> + regmap_reg_range(AXP20X_VBUS_IPSOUT_MGMT, AXP20X_V_OFF),
>> regmap_reg_range(AXP20X_CHRG_CTRL1, AXP20X_CHRG_CTRL1),
>> regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES),
>> regmap_reg_range(AXP20X_RDC_H, AXP20X_OCV(AXP20X_OCV_MAX)),
>> @@ -94,7 +94,7 @@ static const struct regmap_access_table axp20x_volatile_table = {
>> /* AXP22x ranges are shared with the AXP809, as they cover the same range */
>> static const struct regmap_range axp22x_writeable_ranges[] = {
>> regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
>> - regmap_reg_range(AXP20X_VBUS_IPSOUT_MGMT, AXP20X_VBUS_IPSOUT_MGMT),
>> + regmap_reg_range(AXP20X_VBUS_IPSOUT_MGMT, AXP20X_V_OFF),
>> regmap_reg_range(AXP20X_CHRG_CTRL1, AXP20X_CHRG_CTRL1),
>> regmap_reg_range(AXP20X_DCDC_MODE, AXP22X_BATLOW_THRES1),
>> };
>
> --
> Lee Jones
> Linaro STMicroelectronics Landing Team Lead
> Linaro.org │ Open source software for ARM SoCs
> Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists