| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <877f69esym.fsf@free-electrons.com>
Date: Thu, 05 Jan 2017 10:50:25 +0100
From: Gregory CLEMENT <gregory.clement@...e-electrons.com>
To: Viresh Kumar <viresh.kumar@...aro.org>
Cc: Rafael Wysocki <rjw@...ysocki.net>, Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
Javier Martinez Canillas <javier@....samsung.com>,
Jason Cooper <jason@...edaemon.net>,
Andrew Lunn <andrew@...n.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Simon Horman <horms@...ge.net.au>,
Magnus Damm <magnus.damm@...il.com>,
linaro-kernel@...ts.linaro.org, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org,
Vincent Guittot <vincent.guittot@...aro.org>,
arnd.bergmann@...aro.org, linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org,
linux-renesas-soc@...r.kernel.org, linux-mips@...ux-mips.org,
linuxppc-dev@...ts.ozlabs.org, linux-sh@...r.kernel.org
Subject: Re: [PATCH] cpufreq: Remove CONFIG_CPU_FREQ_STAT_DETAILS config option
Hi Viresh,
On jeu., janv. 05 2017, Viresh Kumar <viresh.kumar@...aro.org> wrote:
> This doesn't have any benefit apart from saving a small amount of memory
> when it is disabled. The ifdef hackery in the code makes it dirty
> unnecessarily.
>
> Clean it up by removing the Kconfig option completely. Few defconfigs
> are also updated and CONFIG_CPU_FREQ_STAT_DETAILS is replaced with
> CONFIG_CPU_FREQ_STAT now in them, as users wanted stats to be enabled.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@...aro.org>
> ---
> arch/arm/configs/exynos_defconfig | 2 +-
> arch/arm/configs/multi_v5_defconfig | 2 +-
> arch/arm/configs/multi_v7_defconfig | 2 +-
> arch/arm/configs/mvebu_v5_defconfig | 2 +-
For this file:
Acked-by: Gregory CLEMENT <gregory.clement@...e-electrons.com>
Gregory
> arch/arm/configs/pxa_defconfig | 2 +-
> arch/arm/configs/shmobile_defconfig | 2 +-
> arch/mips/configs/lemote2f_defconfig | 1 -
> arch/powerpc/configs/ppc6xx_defconfig | 1 -
> arch/sh/configs/sh7785lcr_32bit_defconfig | 2 +-
> drivers/cpufreq/Kconfig | 8 --------
> drivers/cpufreq/cpufreq_stats.c | 14 --------------
> 11 files changed, 7 insertions(+), 31 deletions(-)
>
> diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
> index 79c415c33f69..809f0bf3042a 100644
> --- a/arch/arm/configs/exynos_defconfig
> +++ b/arch/arm/configs/exynos_defconfig
> @@ -24,7 +24,7 @@ CONFIG_ARM_APPENDED_DTB=y
> CONFIG_ARM_ATAG_DTB_COMPAT=y
> CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
> CONFIG_CPU_FREQ=y
> -CONFIG_CPU_FREQ_STAT_DETAILS=y
> +CONFIG_CPU_FREQ_STAT=y
> CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
> CONFIG_CPU_FREQ_GOV_POWERSAVE=m
> CONFIG_CPU_FREQ_GOV_USERSPACE=m
> diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
> index 361686a362f1..69a4bd13eea5 100644
> --- a/arch/arm/configs/multi_v5_defconfig
> +++ b/arch/arm/configs/multi_v5_defconfig
> @@ -58,7 +58,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0
> CONFIG_ARM_APPENDED_DTB=y
> CONFIG_ARM_ATAG_DTB_COMPAT=y
> CONFIG_CPU_FREQ=y
> -CONFIG_CPU_FREQ_STAT_DETAILS=y
> +CONFIG_CPU_FREQ_STAT=y
> CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
> CONFIG_CPU_IDLE=y
> CONFIG_ARM_KIRKWOOD_CPUIDLE=y
> diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
> index b01a43851294..2dcac90eba01 100644
> --- a/arch/arm/configs/multi_v7_defconfig
> +++ b/arch/arm/configs/multi_v7_defconfig
> @@ -132,7 +132,7 @@ CONFIG_ARM_ATAG_DTB_COMPAT=y
> CONFIG_KEXEC=y
> CONFIG_EFI=y
> CONFIG_CPU_FREQ=y
> -CONFIG_CPU_FREQ_STAT_DETAILS=y
> +CONFIG_CPU_FREQ_STAT=y
> CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
> CONFIG_CPU_FREQ_GOV_POWERSAVE=m
> CONFIG_CPU_FREQ_GOV_USERSPACE=m
> diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig
> index f7f6039419aa..4b598da0d086 100644
> --- a/arch/arm/configs/mvebu_v5_defconfig
> +++ b/arch/arm/configs/mvebu_v5_defconfig
> @@ -44,7 +44,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0
> CONFIG_ARM_APPENDED_DTB=y
> CONFIG_ARM_ATAG_DTB_COMPAT=y
> CONFIG_CPU_FREQ=y
> -CONFIG_CPU_FREQ_STAT_DETAILS=y
> +CONFIG_CPU_FREQ_STAT=y
> CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
> CONFIG_CPU_IDLE=y
> CONFIG_ARM_KIRKWOOD_CPUIDLE=y
> diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
> index e4314b1227a3..271dc7e78e43 100644
> --- a/arch/arm/configs/pxa_defconfig
> +++ b/arch/arm/configs/pxa_defconfig
> @@ -97,7 +97,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0
> CONFIG_CMDLINE="root=/dev/ram0 ro"
> CONFIG_KEXEC=y
> CONFIG_CPU_FREQ=y
> -CONFIG_CPU_FREQ_STAT_DETAILS=y
> +CONFIG_CPU_FREQ_STAT=y
> CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
> CONFIG_CPU_FREQ_GOV_POWERSAVE=m
> CONFIG_CPU_FREQ_GOV_USERSPACE=m
> diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
> index 1b0f8ae36fb3..adeaecd831a4 100644
> --- a/arch/arm/configs/shmobile_defconfig
> +++ b/arch/arm/configs/shmobile_defconfig
> @@ -38,7 +38,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0
> CONFIG_ARM_APPENDED_DTB=y
> CONFIG_KEXEC=y
> CONFIG_CPU_FREQ=y
> -CONFIG_CPU_FREQ_STAT_DETAILS=y
> +CONFIG_CPU_FREQ_STAT=y
> CONFIG_CPU_FREQ_GOV_POWERSAVE=y
> CONFIG_CPU_FREQ_GOV_USERSPACE=y
> CONFIG_CPU_FREQ_GOV_ONDEMAND=y
> diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig
> index 5da76e0e120f..bed745596d86 100644
> --- a/arch/mips/configs/lemote2f_defconfig
> +++ b/arch/mips/configs/lemote2f_defconfig
> @@ -40,7 +40,6 @@ CONFIG_PM_STD_PARTITION="/dev/hda3"
> CONFIG_CPU_FREQ=y
> CONFIG_CPU_FREQ_DEBUG=y
> CONFIG_CPU_FREQ_STAT=m
> -CONFIG_CPU_FREQ_STAT_DETAILS=y
> CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
> CONFIG_CPU_FREQ_GOV_POWERSAVE=m
> CONFIG_CPU_FREQ_GOV_USERSPACE=m
> diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
> index 3ce91a3df27f..1d2d69dd6409 100644
> --- a/arch/powerpc/configs/ppc6xx_defconfig
> +++ b/arch/powerpc/configs/ppc6xx_defconfig
> @@ -62,7 +62,6 @@ CONFIG_MPC8610_HPCD=y
> CONFIG_GEF_SBC610=y
> CONFIG_CPU_FREQ=y
> CONFIG_CPU_FREQ_STAT=m
> -CONFIG_CPU_FREQ_STAT_DETAILS=y
> CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
> CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> CONFIG_CPU_FREQ_GOV_POWERSAVE=m
> diff --git a/arch/sh/configs/sh7785lcr_32bit_defconfig b/arch/sh/configs/sh7785lcr_32bit_defconfig
> index 9bdcf72ec06a..2fce54d9c388 100644
> --- a/arch/sh/configs/sh7785lcr_32bit_defconfig
> +++ b/arch/sh/configs/sh7785lcr_32bit_defconfig
> @@ -25,7 +25,7 @@ CONFIG_SH_SH7785LCR=y
> CONFIG_NO_HZ=y
> CONFIG_HIGH_RES_TIMERS=y
> CONFIG_CPU_FREQ=y
> -CONFIG_CPU_FREQ_STAT_DETAILS=y
> +CONFIG_CPU_FREQ_STAT=y
> CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
> CONFIG_SH_CPU_FREQ=y
> CONFIG_HEARTBEAT=y
> diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
> index d8b164a7c4e5..15adef473d42 100644
> --- a/drivers/cpufreq/Kconfig
> +++ b/drivers/cpufreq/Kconfig
> @@ -37,14 +37,6 @@ config CPU_FREQ_STAT
>
> If in doubt, say N.
>
> -config CPU_FREQ_STAT_DETAILS
> - bool "CPU frequency transition statistics details"
> - depends on CPU_FREQ_STAT
> - help
> - Show detailed CPU frequency transition table in sysfs.
> -
> - If in doubt, say N.
> -
> choice
> prompt "Default CPUFreq governor"
> default CPU_FREQ_DEFAULT_GOV_USERSPACE if ARM_SA1100_CPUFREQ || ARM_SA1110_CPUFREQ
> diff --git a/drivers/cpufreq/cpufreq_stats.c b/drivers/cpufreq/cpufreq_stats.c
> index ac284e66839c..18abd454da43 100644
> --- a/drivers/cpufreq/cpufreq_stats.c
> +++ b/drivers/cpufreq/cpufreq_stats.c
> @@ -25,9 +25,7 @@ struct cpufreq_stats {
> unsigned int last_index;
> u64 *time_in_state;
> unsigned int *freq_table;
> -#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
> unsigned int *trans_table;
> -#endif
> };
>
> static int cpufreq_stats_update(struct cpufreq_stats *stats)
> @@ -46,9 +44,7 @@ static void cpufreq_stats_clear_table(struct cpufreq_stats *stats)
> unsigned int count = stats->max_state;
>
> memset(stats->time_in_state, 0, count * sizeof(u64));
> -#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
> memset(stats->trans_table, 0, count * count * sizeof(int));
> -#endif
> stats->last_time = get_jiffies_64();
> stats->total_trans = 0;
> }
> @@ -84,7 +80,6 @@ static ssize_t store_reset(struct cpufreq_policy *policy, const char *buf,
> return count;
> }
>
> -#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
> static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf)
> {
> struct cpufreq_stats *stats = policy->stats;
> @@ -129,7 +124,6 @@ static ssize_t show_trans_table(struct cpufreq_policy *policy, char *buf)
> return len;
> }
> cpufreq_freq_attr_ro(trans_table);
> -#endif
>
> cpufreq_freq_attr_ro(total_trans);
> cpufreq_freq_attr_ro(time_in_state);
> @@ -139,9 +133,7 @@ static struct attribute *default_attrs[] = {
> &total_trans.attr,
> &time_in_state.attr,
> &reset.attr,
> -#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
> &trans_table.attr,
> -#endif
> NULL
> };
> static struct attribute_group stats_attr_group = {
> @@ -200,9 +192,7 @@ void cpufreq_stats_create_table(struct cpufreq_policy *policy)
>
> alloc_size = count * sizeof(int) + count * sizeof(u64);
>
> -#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
> alloc_size += count * count * sizeof(int);
> -#endif
>
> /* Allocate memory for time_in_state/freq_table/trans_table in one go */
> stats->time_in_state = kzalloc(alloc_size, GFP_KERNEL);
> @@ -211,9 +201,7 @@ void cpufreq_stats_create_table(struct cpufreq_policy *policy)
>
> stats->freq_table = (unsigned int *)(stats->time_in_state + count);
>
> -#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
> stats->trans_table = stats->freq_table + count;
> -#endif
>
> stats->max_state = count;
>
> @@ -259,8 +247,6 @@ void cpufreq_stats_record_transition(struct cpufreq_policy *policy,
> cpufreq_stats_update(stats);
>
> stats->last_index = new_index;
> -#ifdef CONFIG_CPU_FREQ_STAT_DETAILS
> stats->trans_table[old_index * stats->max_state + new_index]++;
> -#endif
> stats->total_trans++;
> }
> --
> 2.7.1.410.g6faf27b
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
Powered by blists - more mailing lists