linux-kernel - Re: [PATCH] ARM: dts: sunxi: Use axp209.dtsi for Olinuxino Lime2

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20170105171406.s5xpbtcpe4esn6iz@lukather>
Date:   Thu, 5 Jan 2017 18:14:06 +0100
From:   Maxime Ripard <maxime.ripard@...e-electrons.com>
To:     Emmanuel Vadot <manu@...ouilliste.com>
Cc:     robh+dt@...nel.org, mark.rutland@....com, linux@...linux.org.uk,
        wens@...e.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] ARM: dts: sunxi: Use axp209.dtsi for Olinuxino Lime2

On Tue, Dec 27, 2016 at 11:22:38AM +0100, Emmanuel Vadot wrote:
> Use axp209.dtsi in sun7i-a20-olinuxino-lime2.dts and correct
> some regulators.
> 
> DCDC2 is used for vdd-cpu so it should never be bellow 1V and above 1.4V
> DCDC3 is used for VDD_INT so same as above.
> LD01 is used for the RTC, and should have a typical value of 1.3V
> LD02 is used for AVCC and should have a typical value of 3.0V
> LD03/4 are used for Port-E/Port-G Power pin, and the schematics recommands
> to set them to 2.8V as they can be used for CSI0/1.
> 
> Signed-off-by: Emmanuel Vadot <manu@...ouilliste.com>

Applied, thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Download attachment "signature.asc" of type "application/pgp-signature" (802 bytes)