Date:   Thu, 5 Jan 2017 18:36:45 +0100
From:   Maxime Ripard <maxime.ripard@...e-electrons.com>
To:     Andre Przywara <andre.przywara@....com>
Cc:     Ulf Hansson <ulf.hansson@...aro.org>, Chen-Yu Tsai <wens@...e.org>,
        Hans De Goede <hdegoede@...hat.com>,
        Icenowy Zheng <icenowy@...c.xyz>,
        Mark Rutland <mark.rutland@....com>,
        Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
        linux-mmc@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-sunxi@...glegroups.com, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 5/5] arm64: dts: add BananaPi-M64 support

On Mon, Jan 02, 2017 at 11:03:46PM +0000, Andre Przywara wrote:
> The Banana Pi M64 board is a typical single board computer based on the
> Allwinner A64 SoC. Aside from the usual peripherals it features eMMC
> storage, which is connected to the 8-bit capable SDHC2 controller.
> Also it has a soldered WiFi/Bluetooth chip, so we enable UART1 and SDHC1
> as those two interfaces are connected to it.
> 
> Signed-off-by: Andre Przywara <andre.przywara@....com>
> ---
>  arch/arm64/boot/dts/allwinner/Makefile             |   1 +
>  .../boot/dts/allwinner/sun50i-a64-bananapi-m64.dts | 125 +++++++++++++++++++++
>  arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi      |  10 ++
>  3 files changed, 136 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
> 
> diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
> index 1e29a5a..51ecb04 100644
> --- a/arch/arm64/boot/dts/allwinner/Makefile
> +++ b/arch/arm64/boot/dts/allwinner/Makefile
> @@ -1,4 +1,5 @@
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
> +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb

Please sort it by alphabetical order.

>  
>  always		:= $(dtb-y)
>  subdir-y	:= $(dts-dirs)
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
> new file mode 100644
> index 0000000..941ea07
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
> @@ -0,0 +1,125 @@
> +/*
> + * Copyright (c) 2016 ARM Ltd.
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This library is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This library is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-a64.dtsi"
> +
> +/ {
> +	model = "BananaPi-M64";
> +	compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64";
> +
> +	aliases {
> +		serial0 = &uart0;
> +		serial1 = &uart1;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	reg_vcc3v3: vcc3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc3v3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_pins_a>;
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart1_pins_4>;
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c1_pins>;
> +	status = "okay";
> +};

And the nodes too.

> +
> +&i2c1_pins {
> +	bias-pull-up;
> +};
> +
> +&mmc0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc0_pins>, <&mmc0_default_cd_pin>;
> +	vmmc-supply = <&reg_vcc3v3>;
> +	cd-gpios = <&pio 5 6 0>;

Please use a define here.

> +	cd-inverted;
> +	disable-wp;
> +	bus-width = <4>;
> +	status = "okay";
> +};
> +
> +&mmc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc1_pins>;
> +	vmmc-supply = <&reg_vcc3v3>;
> +	bus-width = <4>;
> +	non-removable;
> +	status = "okay";
> +};
> +
> +&mmc2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc2_pins>;
> +	vmmc-supply = <&reg_vcc3v3>;
> +	bus-width = <8>;
> +	non-removable;
> +	cap-mmc-hw-reset;
> +	status = "okay";
> +};
> +
> +&mmc2_pins {
> +	/* Increase drive strength for DDR modes */
> +	drive-strength = <40>;

Allwinner recommends to use 30mA, have you tested it?

> +	/* eMMC is missing pull-ups */
> +	bias-pull-up;

This is the default now.

> +};
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> index c680566..9de96ba 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> @@ -151,6 +151,16 @@
>  				function = "uart0";
>  			};
>  
> +			uart1_pins: uart1@0 {
> +				pins = "PG6", "PG7";
> +				function = "uart1";
> +			};
> +
> +			uart1_pins_4: uart1_4@0 {
> +				pins = "PG6", "PG7", "PG8", "PG9";

For other nodes, we've been creating another node for the cts and rts
signals, and reference both nodes in the pinctrl properties. It allows
to avoid duplication.

> +				function = "uart1";
> +			};
> +
>  			mmc0_pins: mmc0@0 {

Please sort it by alphabetical order. And it should be in a separate
patch.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Download attachment "signature.asc" of type "application/pgp-signature" (802 bytes)

Powered by blists - more mailing lists