linux-kernel - Re: [PATCH net-next 01/10] net: netcp: ethss: add support of subsystem register region regmap

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 5 Jan 2017 15:42:38 -0500
From:   Murali Karicheri <m-karicheri2@...com>
To:     Rob Herring <robh@...nel.org>
CC:     <netdev@...r.kernel.org>, <linux-omap@...r.kernel.org>,
        <grygorii.strashko@...com>, <mugunthanvnm@...com>,
        <linux-kernel@...r.kernel.org>, <arnd@...db.de>,
        <davem@...emloft.net>, <devicetree@...r.kernel.org>,
        <mark.rutland@....com>
Subject: Re: [PATCH net-next 01/10] net: netcp: ethss: add support of
 subsystem register region regmap

Rob,

On 12/22/2016 04:24 PM, Rob Herring wrote:
> On Tue, Dec 20, 2016 at 05:09:44PM -0500, Murali Karicheri wrote:
>> From: WingMan Kwok <w-kwok2@...com>
>>
>> 10gbe phy driver needs to access the 10gbe subsystem control
>> register during phy initialization. To facilitate the shared
>> access of the subsystem register region between the 10gbe Ethernet
>> driver and the phy driver, this patch adds support of the
>> subsystem register region defined by a syscon node in the dts.
>>
>> Although there is no shared access to the gbe subsystem register
>> region, using syscon for that is for the sake of consistency.
>>
>> This change is backward compatible with previously released gbe
>> devicetree bindings.
>>
>> Signed-off-by: WingMan Kwok <w-kwok2@...com>
>> Signed-off-by: Murali Karicheri <m-karicheri2@...com>
>> Signed-off-by: Sekhar Nori <nsekhar@...com>
>> ---
>>  .../devicetree/bindings/net/keystone-netcp.txt     |  16 ++-
>>  drivers/net/ethernet/ti/netcp_ethss.c              | 140 +++++++++++++++++----
>>  2 files changed, 127 insertions(+), 29 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/net/keystone-netcp.txt b/Documentation/devicetree/bindings/net/keystone-netcp.txt
>> index 04ba1dc..0854a73 100644
>> --- a/Documentation/devicetree/bindings/net/keystone-netcp.txt
>> +++ b/Documentation/devicetree/bindings/net/keystone-netcp.txt
>> @@ -72,20 +72,24 @@ Required properties:
>>  		"ti,netcp-gbe-2" for 1GbE N NetCP 1.5 (N=2)
>>  		"ti,netcp-xgbe" for 10 GbE
>>  
>> +- syscon-subsys:	phandle to syscon node of the switch
>> +			subsystem registers.
>> +
>>  - reg:		register location and the size for the following register
>>  		regions in the specified order.
>>  		- switch subsystem registers
>> +		- sgmii module registers
> 
> This needs to go on the end of the list. Otherwise, it is not backwards 
> compatible.

Thanks for your review! I assumed backward compatibility means new kernel
should work with old DTB. The driver code is adjusted to work with both
DTBs. Isn't that enough?

Murali

> 
>>  		- sgmii port3/4 module registers (only for NetCP 1.4)
>>  		- switch module registers
>>  		- serdes registers (only for 10G)
>>  
>>  		NetCP 1.4 ethss, here is the order
>> -			index #0 - switch subsystem registers
>> +			index #0 - sgmii module registers
>>  			index #1 - sgmii port3/4 module registers
>>  			index #2 - switch module registers
>>  
>>  		NetCP 1.5 ethss 9 port, 5 port and 2 port
>> -			index #0 - switch subsystem registers
>> +			index #0 - sgmii module registers
>>  			index #1 - switch module registers
>>  			index #2 - serdes registers
>>  
>> @@ -145,6 +149,11 @@ Optional properties:
>>  
>>  Example binding:
>>  
>> +gbe_subsys: subsys@...0000 {
>> +	compatible = "syscon";
>> +	reg = <0x02090000 0x100>;
>> +};
>> +
>>  netcp: netcp@...0000 {
>>  	reg = <0x2620110 0x8>;
>>  	reg-names = "efuse";
>> @@ -163,7 +172,8 @@ netcp: netcp@...0000 {
>>  		ranges;
>>  		gbe@...00 {
>>  			label = "netcp-gbe";
>> -			reg = <0x90000 0x300>, <0x90400 0x400>, <0x90800 0x700>;
>> +			syscon-subsys = <&gbe_subsys>;
>> +			reg = <0x90100 0x200>, <0x90400 0x200>, <0x90800 0x700>;
>>  			/* enable-ale; */
>>  			tx-queue = <648>;
>>  			tx-channel = <8>;
> 


-- 
Murali Karicheri
Linux Kernel, Keystone