linux-kernel - [PATCH 4.8 77/96] PCI: Check for PME in targeted sleep state

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20170106214230.847199600@linuxfoundation.org>
Date:   Fri,  6 Jan 2017 22:44:05 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Pierre de Villemereuil <flyos@...loo.org>,
        Alan Stern <stern@...land.harvard.edu>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        "Rafael J. Wysocki" <rafael.j.wysocki@...el.com>,
        Lukas Wunner <lukas@...ner.de>
Subject: [PATCH 4.8 77/96] PCI: Check for PME in targeted sleep state

4.8-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alan Stern <stern@...land.harvard.edu>

commit 6496ebd7edf446fccf8266a1a70ffcb64252593e upstream.

One some systems, the firmware does not allow certain PCI devices to be put
in deep D-states.  This can cause problems for wakeup signalling, if the
device does not support PME# in the deepest allowed suspend state.  For
example, Pierre reports that on his system, ACPI does not permit his xHCI
host controller to go into D3 during runtime suspend -- but D3 is the only
state in which the controller can generate PME# signals.  As a result, the
controller goes into runtime suspend but never wakes up, so it doesn't work
properly.  USB devices plugged into the controller are never detected.

If the device relies on PME# for wakeup signals but is not capable of
generating PME# in the target state, the PCI core should accurately report
that it cannot do wakeup from runtime suspend.  This patch modifies the
pci_dev_run_wake() routine to add this check.

Reported-by: Pierre de Villemereuil <flyos@...loo.org>
Tested-by: Pierre de Villemereuil <flyos@...loo.org>
Signed-off-by: Alan Stern <stern@...land.harvard.edu>
Signed-off-by: Bjorn Helgaas <bhelgaas@...gle.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
CC: Lukas Wunner <lukas@...ner.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 drivers/pci/pci.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2064,6 +2064,10 @@ bool pci_dev_run_wake(struct pci_dev *de
 	if (!dev->pme_support)
 		return false;

+	/* PME-capable in principle, but not from the intended sleep state */
+	if (!pci_pme_capable(dev, pci_target_state(dev)))
+		return false;
+
 	while (bus->parent) {
 		struct pci_dev *bridge = bus->self;