linux-kernel - Re: [PATCH v2 RESEND] video: backlight: pwm_bl: Initialize fb_bl_on[x] and use_count during pwm_backlight

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20170106132949.3fa201f8@jawa>
Date:   Fri, 6 Jan 2017 13:29:49 +0100
From:   Lukasz Majewski <l.majewski@...ess.pl>
To:     Lee Jones <lee.jones@...aro.org>,
        Thierry Reding <thierry.reding@...il.com>,
        Jingoo Han <jingoohan1@...il.com>
Cc:     linux-pwm@...r.kernel.org, linux-fbdev@...r.kernel.org,
        linux-kernel@...r.kernel.org, Liu Ying <Ying.Liu@...escale.com>,
        Fabio Estevam <fabio.estevam@....com>,
        Fabio Estevam <festevam@...il.com>,
        Tomi Valkeinen <tomi.valkeinen@...com>
Subject: Re: [PATCH v2 RESEND] video: backlight: pwm_bl: Initialize
 fb_bl_on[x] and use_count during pwm_backlight_probe()

Hi Lee, Thierry, Jingoo,

> 
> Please respond to Lukasz.

Gentel Ping....

Best regards,
Łukasz Majewski

> 
> On Mon, 26 Dec 2016, Lukasz Majewski wrote:
> 
> > The commit a55944ca82d2 
> > ("backlight: update bd state & fb_blank properties when necessary")
> > has posed some extra restrictions on blanking and unblanking frame
> > buffer device.
> > 
> > Unfortunately, pwm_bl driver's probe did not initialize members of
> > struct backlight_device necessary for further blank/unblank
> > operation.
> > 
> > This code in case of initial unblank of backlight device (default 
> > behaviour) sets use_count to 1 and marks this particular backlight
> > device as used by all available fb devices (since it is not known
> > during probe how much and which fb devices will be assigned).
> > 
> > Without this code, the backlight works properly until one tries to
> > blank it manually from sysfs with "echo 1
> > > /sys/class/graphics/fb0/blank". Since fb_bl_on[0] and use_count
> > > were both set to 0, the logic at
> > fb_notifier_callback (@backlight.c) thought that we didn't turn on
> > (unblanked) the backlight device and refuses to disable (blank) it.
> > As a result we see garbage from fb displayed.
> > 
> > Signed-off-by: Lukasz Majewski <l.majewski@...ess.pl>
> > ---
> > The patch has been tested on i.MX6q with vanilla 4.9 kernel.
> > It applies on 4.10-rc1.
> > ---
> >  drivers/video/backlight/pwm_bl.c | 10 +++++++++-
> >  1 file changed, 9 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/video/backlight/pwm_bl.c
> > b/drivers/video/backlight/pwm_bl.c index 1261400..6859ba0 100644
> > --- a/drivers/video/backlight/pwm_bl.c
> > +++ b/drivers/video/backlight/pwm_bl.c
> > @@ -202,7 +202,7 @@ static int pwm_backlight_probe(struct
> > platform_device *pdev) struct pwm_bl_data *pb;
> >  	int initial_blank = FB_BLANK_UNBLANK;
> >  	struct pwm_args pargs;
> > -	int ret;
> > +	int ret, i;
> >  
> >  	if (!data) {
> >  		ret = pwm_backlight_parse_dt(&pdev->dev, &defdata);
> > @@ -348,6 +348,14 @@ static int pwm_backlight_probe(struct
> > platform_device *pdev) 
> >  	bl->props.brightness = data->dft_brightness;
> >  	bl->props.power = initial_blank;
> > +
> > +	if (initial_blank == FB_BLANK_UNBLANK) {
> > +		for (i = 0; i < FB_MAX; i++)
> > +			bl->fb_bl_on[i] = true;
> > +
> > +		bl->use_count = 1;
> > +	}
> > +
> >  	backlight_update_status(bl);
> >  
> >  	platform_set_drvdata(pdev, bl);
> 


Content of type "application/pgp-signature" skipped