linux-kernel - Re: imx: RS-485 problems during TX, maybe DMA related

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20170107153434.GA13307@archie.localdomain>
Date:   Sat, 7 Jan 2017 16:34:34 +0100
From:   Clemens Gruber <clemens.gruber@...ruber.com>
To:     Fabio Estevam <festevam@...il.com>
Cc:     linux-serial@...r.kernel.org,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Uwe Kleine-König 
        <u.kleine-koenig@...gutronix.de>, Nandor Han <nandor.han@...com>,
        Lucas Stach <l.stach@...gutronix.de>,
        Fabio Estevam <fabio.estevam@...escale.com>,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: imx: RS-485 problems during TX, maybe DMA related

Hi Fabio,

On Sat, Jan 07, 2017 at 12:57:10PM -0200, Fabio Estevam wrote:
> The MX6QDL_PAD_CSI0_DAT16__UART4_CTS_B option is only valid in dte mode.

Ah, the input select is limited in that way, I see.

You wrote that you tried rts-gpios.
What about setting cts-gpios to gpio6 2 in the DT?

Or can you remux RX and TX to be switched to work in dte mode?

Regards,
Clemens