[ 0.000000] Linux version 4.8.15 (root@reddog) (gcc version 5.4.0 (GCC) ) #1 Sun Dec 18 22:48:37 CST 2016 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f58ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f590000-0x000000007f5e2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f5e3000-0x000000007f5effff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007f5f0000-0x000000007f5fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 2.5 present. [ 0.000000] DMI: Dell Inc. Inspiron 530/0RY007, BIOS 1.0.3 07/12/2007 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7f590 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CAFFF write-protect [ 0.000000] CB000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable [ 0.000000] 2 base 07F800000 mask FFF800000 uncachable [ 0.000000] 3 base 07F600000 mask FFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] found SMP MP-table at [mem 0x000f3e30-0x000f3e3f] mapped at [c00f3e30] [ 0.000000] initial memory mapped: [mem 0x00000000-0x027fffff] [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384 [ 0.000000] BRK [0x02259000, 0x02259fff] PGTABLE [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F96C0 000024 (v02 DELL ) [ 0.000000] ACPI: XSDT 0x000000007F5E3080 00005C (v01 DELL FX09 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 0x000000007F5E7200 0000F4 (v03 DELL FX09 42302E31 AWRD 00000000) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/8 (20160422/tbfadt-624) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/8 (20160422/tbfadt-624) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/8 (20160422/tbfadt-624) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/8 (20160422/tbfadt-624) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 8, using default 32 (20160422/tbfadt-708) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 8, using default 16 (20160422/tbfadt-708) [ 0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 8, using default 32 (20160422/tbfadt-708) [ 0.000000] ACPI: DSDT 0x000000007F5E3200 003FFC (v01 DELL AWRDACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 0x000000007F590000 000040 [ 0.000000] ACPI: FACS 0x000000007F590000 000040 [ 0.000000] ACPI: HPET 0x000000007F5E73C0 000038 (v01 DELL FX09 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG 0x000000007F5E7400 00003C (v01 DELL FX09 42302E31 AWRD 00000000) [ 0.000000] ACPI: DMY1 0x000000007F5E7440 000176 (v01 DELL FX09 42302E31 AWRD 00000000) [ 0.000000] ACPI: DMY2 0x000000007F5E75C0 000080 (v01 DELL FX09 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC 0x000000007F5E7300 000084 (v01 DELL FX09 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT 0x000000007F5E7CA0 000380 (v01 PmRef CpuPm 00003000 INTL 20041203) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1149MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] BRK [0x0225a000, 0x0225afff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff] [ 0.000000] HighMem [mem 0x00000000377fe000-0x000000007f58ffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007f58ffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f58ffff] [ 0.000000] On node 0 totalpages: 521517 [ 0.000000] DMA zone: 40 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3997 pages, LIFO batch:0 [ 0.000000] Normal zone: 2180 pages used for memmap [ 0.000000] Normal zone: 223230 pages, LIFO batch:31 [ 0.000000] HighMem zone: 294290 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Reserving Intel graphics memory at 0x7f800000-0x7fffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519297 [ 0.000000] Kernel command line: BOOT_IMAGE=Linux ro root=801 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0007f590) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 2045852K/2086068K available (12416K kernel code, 988K rwdata, 3876K rodata, 768K init, 676K bss, 40216K reserved, 0K cma-reserved, 1177160K highmem) [ 0.000000] virtual kernel memory layout: fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc20e5000 - 0xc21a5000 ( 768 kB) .data : 0xc1c20691 - 0xc20e3120 (4874 kB) .text : 0xc1000000 - 0xc1c20691 (12417 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=f5c24000 soft=f5c26000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 1596.165 MHz processor [ 0.002001] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.33 BogoMIPS (lpj=1596165) [ 0.002163] pid_max: default: 32768 minimum: 301 [ 0.002252] ACPI: Core revision 20160422 [ 0.006285] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.006479] Security Framework initialized [ 0.006563] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.006648] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.007071] mce: CPU supports 6 MCE banks [ 0.007156] CPU0: Thermal monitoring enabled (TM2) [ 0.007239] process: using mwait in idle threads [ 0.007324] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.007405] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.007486] CPU: Genuine Intel(R) CPU 2140 @ 1.60GHz (family: 0x6, model: 0xf, stepping: 0x2) [ 0.008006] ftrace: allocating 40601 entries in 80 pages [ 0.025092] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver. [ 0.025255] core: PEBS disabled due to CPU errata [ 0.025334] ... version: 2 [ 0.025410] ... bit width: 40 [ 0.025485] ... generic registers: 2 [ 0.025561] ... value mask: 000000ffffffffff [ 0.025641] ... max period: 000000007fffffff [ 0.025720] ... fixed-purpose events: 3 [ 0.026004] ... event mask: 0000000700000003 [ 0.026274] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.026724] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.037000] devtmpfs: initialized [ 0.037000] PM: Registering ACPI NVS region [mem 0x7f590000-0x7f5e2fff] (339968 bytes) [ 0.037000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.037000] xor: measuring software checksum speed [ 0.047002] pIII_sse : 7388.000 MB/sec [ 0.057002] prefetch64-sse: 8864.000 MB/sec [ 0.057079] xor: using function: prefetch64-sse (8864.000 MB/sec) [ 0.057172] atomic64_test: passed for i586+ platform with CX8 and with SSE [ 0.057254] pinctrl core: initialized pinctrl subsystem [ 0.057566] NET: Registered protocol family 16 [ 0.057854] cpuidle: using governor ladder [ 0.057931] cpuidle: using governor menu [ 0.058134] ACPI: bus type PCI registered [ 0.058211] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.058355] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.058490] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.058572] PCI: Using MMCONFIG for extended config space [ 0.058650] PCI: Using configuration type 1 for base access [ 0.083006] raid6: mmxx1 gen() 2140 MB/s [ 0.100019] raid6: mmxx2 gen() 2457 MB/s [ 0.117039] raid6: sse1x1 gen() 1453 MB/s [ 0.135034] raid6: sse1x2 gen() 1882 MB/s [ 0.152013] raid6: sse2x1 gen() 2699 MB/s [ 0.169003] raid6: sse2x1 xor() 2941 MB/s [ 0.186017] raid6: sse2x2 gen() 3144 MB/s [ 0.203001] raid6: sse2x2 xor() 3349 MB/s [ 0.203078] raid6: using algorithm sse2x2 gen() 3144 MB/s [ 0.203156] raid6: .... xor() 3349 MB/s, rmw enabled [ 0.203234] raid6: using ssse3x1 recovery algorithm [ 0.203363] ACPI: Added _OSI(Module Device) [ 0.203440] ACPI: Added _OSI(Processor Device) [ 0.203516] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.203594] ACPI: Added _OSI(Processor Aggregator Device) [ 0.207083] ACPI: Dynamic OEM Table Load: [ 0.207208] ACPI: SSDT 0x00000000F5D4FC00 00022A (v01 PmRef Cpu0Ist 00003000 INTL 20041203) [ 0.207894] ACPI: Interpreter enabled [ 0.208003] ACPI: (supports S0 S3 S4 S5) [ 0.208078] ACPI: Using IOAPIC for interrupt routing [ 0.208189] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.213211] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.213300] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.213435] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.213571] acpi PNP0A08:00: host bridge window [io 0x0cf8-0x0cff] (ignored) [ 0.213574] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7 window] (ignored) [ 0.213576] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff window] (ignored) [ 0.213578] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored) [ 0.213580] acpi PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff window] (ignored) [ 0.213583] acpi PNP0A08:00: host bridge window [mem 0x7f600000-0xfebfffff window] (ignored) [ 0.213585] PCI: root bus 00: using default resources [ 0.213826] PCI host bridge to bus 0000:00 [ 0.213905] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.213988] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.214004] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.214093] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.214230] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400 [ 0.214279] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.214381] pci 0000:00:02.0: [8086:29c2] type 00 class 0x030000 [ 0.214393] pci 0000:00:02.0: reg 0x10: [mem 0xfdf00000-0xfdf7ffff] [ 0.214399] pci 0000:00:02.0: reg 0x14: [io 0xff00-0xff07] [ 0.214405] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref] [ 0.214411] pci 0000:00:02.0: reg 0x1c: [mem 0xfde00000-0xfdefffff] [ 0.214564] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300 [ 0.214607] pci 0000:00:1a.0: reg 0x20: [io 0xfe00-0xfe1f] [ 0.214703] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.214837] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300 [ 0.214879] pci 0000:00:1a.1: reg 0x20: [io 0xfd00-0xfd1f] [ 0.215054] pci 0000:00:1a.1: System wakeup disabled by ACPI [ 0.215188] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300 [ 0.215230] pci 0000:00:1a.2: reg 0x20: [io 0xfc00-0xfc1f] [ 0.215326] pci 0000:00:1a.2: System wakeup disabled by ACPI [ 0.215465] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320 [ 0.215484] pci 0000:00:1a.7: reg 0x10: [mem 0xfdfff000-0xfdfff3ff] [ 0.215571] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.215634] pci 0000:00:1a.7: System wakeup disabled by ACPI [ 0.215769] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300 [ 0.215787] pci 0000:00:1b.0: reg 0x10: [mem 0xfdff8000-0xfdffbfff 64bit] [ 0.215861] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.215926] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.216057] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.216099] pci 0000:00:1d.0: reg 0x20: [io 0xfb00-0xfb1f] [ 0.216198] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.216332] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.216374] pci 0000:00:1d.1: reg 0x20: [io 0xfa00-0xfa1f] [ 0.216472] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.216606] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.216649] pci 0000:00:1d.2: reg 0x20: [io 0xf900-0xf91f] [ 0.216745] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.216882] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.216901] pci 0000:00:1d.7: reg 0x10: [mem 0xfdffe000-0xfdffe3ff] [ 0.216988] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.217062] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.217195] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.217301] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.217436] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100 [ 0.217518] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO [ 0.217651] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.217737] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f) [ 0.217867] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 003f) [ 0.218124] pci 0000:00:1f.2: [8086:2920] type 00 class 0x01018f [ 0.218139] pci 0000:00:1f.2: reg 0x10: [io 0xf800-0xf807] [ 0.218147] pci 0000:00:1f.2: reg 0x14: [io 0xf700-0xf703] [ 0.218156] pci 0000:00:1f.2: reg 0x18: [io 0xf600-0xf607] [ 0.218164] pci 0000:00:1f.2: reg 0x1c: [io 0xf500-0xf503] [ 0.218172] pci 0000:00:1f.2: reg 0x20: [io 0xf400-0xf40f] [ 0.218180] pci 0000:00:1f.2: reg 0x24: [io 0xf300-0xf30f] [ 0.218311] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.218327] pci 0000:00:1f.3: reg 0x10: [mem 0xfdffd000-0xfdffd0ff 64bit] [ 0.218349] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f] [ 0.218469] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185 [ 0.218484] pci 0000:00:1f.5: reg 0x10: [io 0xf100-0xf107] [ 0.218492] pci 0000:00:1f.5: reg 0x14: [io 0xf000-0xf003] [ 0.218500] pci 0000:00:1f.5: reg 0x18: [io 0xef00-0xef07] [ 0.218509] pci 0000:00:1f.5: reg 0x1c: [io 0xee00-0xee03] [ 0.218517] pci 0000:00:1f.5: reg 0x20: [io 0xed00-0xed0f] [ 0.218525] pci 0000:00:1f.5: reg 0x24: [io 0xec00-0xec0f] [ 0.218691] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.218773] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.218776] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.218780] pci 0000:00:01.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.218829] pci 0000:02:00.0: [11c1:5811] type 00 class 0x0c0010 [ 0.218846] pci 0000:02:00.0: reg 0x10: [mem 0xfddff000-0xfddfffff] [ 0.218925] pci 0000:02:00.0: supports D1 D2 [ 0.218928] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot [ 0.219025] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode) [ 0.219110] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.219114] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.219120] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.219122] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.219125] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.219136] pci_bus 0000:00: on NUMA node 0 [ 0.219763] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.220160] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.220649] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 0.221073] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.221474] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.221963] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 0.222349] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.222749] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 *4 5 7 9 10 11 12 14 15) [ 0.223201] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.223427] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.223509] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.223640] vgaarb: loaded [ 0.223712] vgaarb: bridge control possible 0000:00:02.0 [ 0.223891] SCSI subsystem initialized [ 0.224036] libata version 3.00 loaded. [ 0.224042] ACPI: bus type USB registered [ 0.224156] usbcore: registered new interface driver usbfs [ 0.224250] usbcore: registered new interface driver hub [ 0.224342] usbcore: registered new device driver usb [ 0.224514] PCI: Using ACPI for IRQ routing [ 0.230977] PCI: pci_cache_line_size set to 64 bytes [ 0.231027] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.231030] e820: reserve RAM buffer [mem 0x7f590000-0x7fffffff] [ 0.231340] clocksource: Switched to clocksource refined-jiffies [ 0.247236] VFS: Disk quotas dquot_6.6.0 [ 0.247344] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.247526] pnp: PnP ACPI init [ 0.247827] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.247912] system 00:00: [io 0x0800-0x087f] has been reserved [ 0.247994] system 00:00: [io 0x0290-0x0297] has been reserved [ 0.248083] system 00:00: [io 0x0880-0x088f] has been reserved [ 0.248169] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.248275] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.248481] system 00:02: [io 0x0400-0x04bf] could not be reserved [ 0.248567] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.248824] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved [ 0.248912] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.249049] system 00:04: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.249135] system 00:04: [mem 0x7f600000-0x7f6fffff] could not be reserved [ 0.249221] system 00:04: [mem 0xfed00000-0xfed000ff] has been reserved [ 0.249304] system 00:04: [mem 0x7f590000-0x7f5fffff] could not be reserved [ 0.249389] system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.249474] system 00:04: [mem 0x00100000-0x7f58ffff] could not be reserved [ 0.249558] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.249643] system 00:04: [mem 0xfed14000-0xfed1dfff] has been reserved [ 0.249726] system 00:04: [mem 0xfed20000-0xfed9ffff] has been reserved [ 0.249810] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.249894] system 00:04: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.249978] system 00:04: [mem 0xfff00000-0xffffffff] has been reserved [ 0.250001] system 00:04: [mem 0x000e0000-0x000effff] has been reserved [ 0.250085] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.250094] pnp: PnP ACPI: found 5 devices [ 0.286812] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.286948] clocksource: Switched to clocksource acpi_pm [ 0.286948] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.286948] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 0.286948] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfdafffff] [ 0.286948] pci 0000:00:01.0: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.286948] pci 0000:00:1e.0: PCI bridge to [bus 02] [ 0.286948] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.286948] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff] [ 0.286948] pci 0000:00:1e.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.286948] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.286948] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 0.286948] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.286948] pci_bus 0000:01: resource 1 [mem 0xfda00000-0xfdafffff] [ 0.286948] pci_bus 0000:01: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref] [ 0.286948] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.286948] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff] [ 0.286948] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref] [ 0.286948] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] [ 0.286948] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff] [ 0.286948] NET: Registered protocol family 2 [ 0.287295] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.287399] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.287499] TCP: Hash tables configured (established 8192 bind 8192) [ 0.287609] UDP hash table entries: 512 (order: 1, 8192 bytes) [ 0.287695] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes) [ 0.287823] NET: Registered protocol family 1 [ 0.287989] RPC: Registered named UNIX socket transport module. [ 0.288084] RPC: Registered udp transport module. [ 0.288162] RPC: Registered tcp transport module. [ 0.288238] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.288336] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.289683] PCI: CLS 64 bytes, default 64 [ 0.290323] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.290423] audit: initializing netlink subsys (disabled) [ 0.290517] audit: type=2000 audit(1483910633.289:1): initialized [ 0.290806] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 0.294307] NFS: Registering the id_resolver key type [ 0.294396] Key type id_resolver registered [ 0.294472] Key type id_legacy registered [ 0.294552] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 0.294864] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.295040] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. [ 0.295229] JFS: nTxBlock = 8192, nTxLock = 65536 [ 0.298784] SGI XFS with ACLs, security attributes, no debug enabled [ 0.299485] ocfs2: Registered cluster interface o2cb [ 0.299627] OCFS2 User DLM kernel interface loaded [ 0.301762] jitterentropy: Initialization failed with host not compliant with requirements: 2 [ 0.301920] async_tx: api initialized (async) [ 0.302023] bounce: pool size: 64 pages [ 0.302114] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.302275] io scheduler noop registered [ 0.302352] io scheduler deadline registered [ 0.302476] io scheduler cfq registered (default) [ 0.302988] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.303093] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.303194] intel_idle: does not run on family 6 model 15 [ 0.303277] GHES: HEST is not enabled! [ 0.305015] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.305629] hpet_acpi_add: no address or irqs in _CRS [ 0.309503] brd: module loaded [ 0.309584] HP CISS Driver (v 3.6.26) [ 0.309943] fnic: Cisco FCoE HBA Driver, ver 1.6.0.21 [ 0.310065] fnic: Successfully Initialized Trace Buffer [ 0.310244] fnic: Successfully Initialized FC_CTLR Trace Buffer [ 0.310555] Adaptec aacraid driver 1.2-1[41066]-ms [ 0.310655] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 0.310949] scsi: Detection failed (no card) [ 0.311067] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.38-k. [ 0.311212] Emulex LightPulse Fibre Channel SCSI driver 11.2.0.0. [ 0.311292] Copyright(c) 2004-2016 Emulex. All rights reserved. [ 0.311439] QLogic BR-series BFA FC/FCOE SCSI driver - version: 3.2.25.0 [ 0.311608] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 0.311762] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 0.311862] megasas: 06.811.02.00-rc1 [ 0.311963] mpt3sas version 13.100.00.00 loaded [ 0.312132] GDT-HA: Storage RAID Controller Driver. Version: 3.05 [ 0.312255] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 0.312351] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 0.312492] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 0.312634] ipr: IBM Power RAID SCSI Device Driver version: 2.6.3 (October 17, 2015) [ 0.312779] RocketRAID 3xxx/4xxx Controller driver v1.10.0 [ 0.312873] stex: Promise SuperTrak EX Driver version: 5.00.0000.01 [ 0.313055] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 0.313412] ata_piix 0000:00:1f.2: version 2.13 [ 0.313542] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.314548] scsi host0: ata_piix [ 0.314729] scsi host1: ata_piix [ 0.314861] ata1: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19 [ 0.316013] ata2: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19 [ 0.316209] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.316885] scsi host2: ata_piix [ 0.317091] scsi host3: ata_piix [ 0.317225] ata3: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19 [ 0.317311] ata4: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19 [ 0.318548] scsi host4: pata_legacy [ 0.318681] ata5: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14 [ 0.640514] ata4: SATA link down (SStatus 0 SControl 300) [ 0.792053] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.794468] ata3.00: ATAPI: HL-DT-STDVD+-RW GSA-H31N, B109, max UDMA/100 [ 0.799108] ata3.00: configured for UDMA/100 [ 1.080072] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.080171] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.080377] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.080469] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1.080559] ata2.01: link offline, clearing class 3 to NONE [ 1.099197] ata1.00: LPM support broken, forcing max_power [ 1.100693] ata1.00: ATA-6: WDC WD2000JD-22HBB0, 08.02D08, max UDMA/133 [ 1.100782] ata1.00: 390721968 sectors, multi 16: LBA48 [ 1.101269] ata2.00: ATAPI: HL-DT-ST CD-RW/DVD-ROM GCC-H10N, C103, max UDMA/100 [ 1.122207] ata1.00: LPM support broken, forcing max_power [ 1.123697] ata1.00: configured for UDMA/133 [ 1.124292] ata2.00: configured for UDMA/100 [ 1.312021] tsc: Refined TSC clocksource calibration: 1595.999 MHz [ 1.312112] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17016147f12, max_idle_ns: 440795216557 ns [ 2.320040] clocksource: Switched to clocksource tsc [ 3.360052] floppy0: no floppy controllers found [ 3.360144] work still pending [ 3.360549] scsi 0:0:0:0: Direct-Access ATA WDC WD2000JD-22H 2D08 PQ: 0 ANSI: 5 [ 3.360997] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 3.361182] sd 0:0:0:0: [sda] Write Protect is off [ 3.361263] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.361285] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.362537] scsi 1:0:0:0: CD-ROM HL-DT-ST CDRW/DVD GCCH10N C103 PQ: 0 ANSI: 5 [ 3.385021] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 3.385163] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.385414] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.387364] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-H31N B109 PQ: 0 ANSI: 5 [ 3.399671] sda: sda1 sda2 [ 3.400169] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.402940] sr 2:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 3.403246] sr 2:0:0:0: Attached scsi CD-ROM sr1 [ 3.403830] scsi host5: pata_legacy [ 3.403964] ata6: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15 [ 3.560302] Fusion MPT base driver 3.04.20 [ 3.560378] Copyright (c) 1999-2008 LSI Corporation [ 3.560460] Fusion MPT SPI Host driver 3.04.20 [ 3.560568] Fusion MPT FC Host driver 3.04.20 [ 3.560666] Fusion MPT SAS Host driver 3.04.20 [ 3.560764] Fusion MPT misc device (ioctl) driver 3.04.20 [ 3.560882] mptctl: Registered with Fusion MPT base driver [ 3.560961] mptctl: /dev/mptctl @ (major,minor=10,220) [ 3.561046] Fusion MPT LAN driver 3.04.20 [ 3.561213] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 3.561692] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.561776] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.562015] mousedev: PS/2 mouse device common for all mice [ 3.562159] rtc_cmos 00:01: RTC can wake from S4 [ 3.562357] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 3.562458] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram [ 3.562548] md: linear personality registered for level -1 [ 3.562628] md: raid0 personality registered for level 0 [ 3.562708] md: raid1 personality registered for level 1 [ 3.562787] md: raid10 personality registered for level 10 [ 3.562917] md: raid6 personality registered for level 6 [ 3.562997] md: raid5 personality registered for level 5 [ 3.563081] md: raid4 personality registered for level 4 [ 3.563159] md: multipath personality registered for level -4 [ 3.563299] device-mapper: uevent: version 1.0.3 [ 3.563463] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 3.563690] input: Speakup as /devices/virtual/input/input1 [ 3.563843] initialized device: /dev/synth, node (MAJOR 10, MINOR 25) [ 3.563940] speakup 3.1.6: initialized [ 3.564021] synth name on entry is: (null) [ 3.564288] Initializing XFRM netlink socket [ 3.564371] NET: Registered protocol family 17 [ 3.564491] 9pnet: Installing 9P2000 support [ 3.564585] Key type dns_resolver registered [ 3.564920] microcode: sig=0x6f2, pf=0x1, revision=0x56 [ 3.565041] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 3.565180] Using IPI Shortcut mode [ 3.565384] registered taskstats version 1 [ 3.565818] Btrfs loaded, crc32c=crc32c-generic [ 3.566161] Key type encrypted registered [ 3.676128] md: Waiting for all devices to be available before autodetect [ 3.676232] md: If you don't use raid, use raid=noautodetect [ 3.676509] md: Autodetecting RAID arrays. [ 3.676587] md: Scanned 0 and added 0 devices. [ 3.676664] md: autorun ... [ 3.676738] md: ... autorun DONE. [ 3.711465] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 3.753554] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 3.753701] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [ 3.784082] devtmpfs: mounted [ 3.784420] Freeing unused kernel memory: 768K (c20e5000 - c21a5000) [ 3.784530] Write protecting the kernel text: 12420k [ 3.784669] Write protecting the kernel read-only data: 3884k [ 4.138428] random: fast init done [ 4.609222] random: crng init done [ 4.792614] loop: module loaded [ 5.643586] udevd[498]: starting eudev-3.1.5 [ 6.306498] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 6.306641] ACPI: Power Button [PWRB] [ 6.306797] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 6.306927] ACPI: Power Button [PWRF] [ 6.326437] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.341530] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.342129] ehci-pci: EHCI PCI platform driver [ 6.342393] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 6.342725] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 6.342870] ehci-pci 0000:00:1a.7: debug port 1 [ 6.346842] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 6.350018] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfdfff000 [ 6.357270] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 6.357421] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.357507] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.357638] usb usb1: Product: EHCI Host Controller [ 6.357717] usb usb1: Manufacturer: Linux 4.8.15 ehci_hcd [ 6.357799] usb usb1: SerialNumber: 0000:00:1a.7 [ 6.358056] hub 1-0:1.0: USB hub found [ 6.358141] hub 1-0:1.0: 6 ports detected [ 6.358539] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 6.358682] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 6.358824] ehci-pci 0000:00:1d.7: debug port 1 [ 6.362801] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 6.367418] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdffe000 [ 6.374014] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 6.374170] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.374257] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.374386] usb usb2: Product: EHCI Host Controller [ 6.374465] usb usb2: Manufacturer: Linux 4.8.15 ehci_hcd [ 6.374546] usb usb2: SerialNumber: 0000:00:1d.7 [ 6.374796] hub 2-0:1.0: USB hub found [ 6.374881] hub 2-0:1.0: 6 ports detected [ 6.429523] uhci_hcd: USB Universal Host Controller Interface driver [ 6.429767] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 6.430084] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 6.430248] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00 [ 6.430394] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.430480] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.430610] usb usb3: Product: UHCI Host Controller [ 6.430689] usb usb3: Manufacturer: Linux 4.8.15 uhci_hcd [ 6.430769] usb usb3: SerialNumber: 0000:00:1a.0 [ 6.430999] hub 3-0:1.0: USB hub found [ 6.431090] hub 3-0:1.0: 2 ports detected [ 6.431401] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 6.431537] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 6.431695] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00 [ 6.431823] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.431908] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.432046] usb usb4: Product: UHCI Host Controller [ 6.432125] usb usb4: Manufacturer: Linux 4.8.15 uhci_hcd [ 6.432206] usb usb4: SerialNumber: 0000:00:1a.1 [ 6.432424] hub 4-0:1.0: USB hub found [ 6.432507] hub 4-0:1.0: 2 ports detected [ 6.437217] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 6.437444] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 6.437600] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fc00 [ 6.437731] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.437817] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.437946] usb usb5: Product: UHCI Host Controller [ 6.438037] usb usb5: Manufacturer: Linux 4.8.15 uhci_hcd [ 6.438118] usb usb5: SerialNumber: 0000:00:1a.2 [ 6.438343] hub 5-0:1.0: USB hub found [ 6.438428] hub 5-0:1.0: 2 ports detected [ 6.438703] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 6.438838] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 6.438991] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00 [ 6.439126] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.439211] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.439341] usb usb6: Product: UHCI Host Controller [ 6.439422] usb usb6: Manufacturer: Linux 4.8.15 uhci_hcd [ 6.439501] usb usb6: SerialNumber: 0000:00:1d.0 [ 6.442589] hub 6-0:1.0: USB hub found [ 6.442676] hub 6-0:1.0: 2 ports detected [ 6.442988] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 6.443146] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 6.443304] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00 [ 6.443435] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.443522] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.443650] usb usb7: Product: UHCI Host Controller [ 6.443729] usb usb7: Manufacturer: Linux 4.8.15 uhci_hcd [ 6.443811] usb usb7: SerialNumber: 0000:00:1d.1 [ 6.444037] hub 7-0:1.0: USB hub found [ 6.444121] hub 7-0:1.0: 2 ports detected [ 6.444391] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 6.444523] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 6.444677] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900 [ 6.448042] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.448130] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.448259] usb usb8: Product: UHCI Host Controller [ 6.448338] usb usb8: Manufacturer: Linux 4.8.15 uhci_hcd [ 6.448420] usb usb8: SerialNumber: 0000:00:1d.2 [ 6.448646] hub 8-0:1.0: USB hub found [ 6.448732] hub 8-0:1.0: 2 ports detected [ 6.513695] Linux agpgart interface v0.103 [ 6.667387] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 6.688016] usb 2-3: new high-speed USB device number 2 using ehci-pci [ 6.724016] usb 1-4: new high-speed USB device number 3 using ehci-pci [ 6.809190] usb 2-3: New USB device found, idVendor=05ac, idProduct=12a8 [ 6.809283] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.809370] usb 2-3: Product: iPhone [ 6.809448] usb 2-3: Manufacturer: Apple Inc. [ 6.809528] usb 2-3: SerialNumber: 8ade58d089ed814752ec061af5a1d250b1076f9f [ 6.819943] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000429-0x0000000000000429 (\PM2S) (20160422/utaddress-255) [ 6.820210] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.820353] ACPI Warning: SystemIO range 0x00000000000004B0-0x00000000000004BF conflicts with OpRegion 0x00000000000004B8-0x00000000000004BB (\GPO2) (20160422/utaddress-255) [ 6.820593] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.820729] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004AF conflicts with OpRegion 0x000000000000048C-0x000000000000048F (\GPO) (20160422/utaddress-255) [ 6.820968] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.821107] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 6.844520] usb 1-4: New USB device found, idVendor=05e3, idProduct=0608 [ 6.844614] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 6.844700] usb 1-4: Product: USB2.0 Hub [ 6.845205] hub 1-4:1.0: USB hub found [ 6.845804] hub 1-4:1.0: 4 ports detected [ 6.880020] usb 4-1: new low-speed USB device number 2 using uhci_hcd [ 6.914015] usb 2-4: new high-speed USB device number 3 using ehci-pci [ 6.952234] [drm] Initialized drm 1.1.0 20060810 [ 7.034939] usb 2-4: New USB device found, idVendor=0781, idProduct=5530 [ 7.035040] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.035127] usb 2-4: Product: Cruzer [ 7.035204] usb 2-4: Manufacturer: SanDisk [ 7.035283] usb 2-4: SerialNumber: 20053045130CBF21B219 [ 7.049040] usb 4-1: New USB device found, idVendor=1c4f, idProduct=0016 [ 7.049133] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.049219] usb 4-1: Product: USB Keyboard [ 7.049296] usb 4-1: Manufacturer: SIGMACHIP [ 7.120023] usb 1-4.2: new low-speed USB device number 4 using ehci-pci [ 7.173019] pci 0000:00:00.0: Intel G33 Chipset [ 7.173121] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 7.173402] pci 0000:00:00.0: detected 8192K stolen memory [ 7.173568] [drm] Memory usable by graphics device = 512M [ 7.173651] [drm] Replacing VGA console driver [ 7.174505] Console: switching to colour dummy device 80x25 [ 7.183053] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.183068] [drm] Driver supports precise vblank timestamp query. [ 7.183330] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 7.185038] thermal LNXTHERM:00: registered as thermal_zone0 [ 7.185048] ACPI: Thermal Zone [THRM] (40 C) [ 7.187074] [drm] RC6 disabled, disabling runtime PM support [ 7.187101] [drm] initialized overlay support [ 7.187449] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0 [ 7.203021] usb 1-4.2: New USB device found, idVendor=093a, idProduct=2510 [ 7.203037] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.203049] usb 1-4.2: Product: USB Optical Mouse [ 7.203057] usb 1-4.2: Manufacturer: PixArt [ 7.253043] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 62 [ 7.253061] Raw EDID: [ 7.253068] 00 ff ff ff ff ff ff 00 10 ac 0b a0 53 4b 55 33 [ 7.253076] 2c 0e 01 03 68 22 1b 78 ee ca f6 a3 57 47 9e 23 [ 7.253084] 11 4f 54 a5 4b 00 71 4f 81 80 01 01 01 01 01 01 [ 7.253091] 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70 [ 7.253098] 13 00 52 0e 11 00 00 1e 00 00 00 fd 00 38 4b 1f [ 7.253106] 50 0e 00 0a 20 20 20 20 20 20 00 00 00 ff 00 44 [ 7.253113] 35 34 32 38 34 41 55 33 55 4b 53 0a 00 00 00 fc [ 7.253121] 00 44 45 4c 4c 20 45 31 37 33 46 50 0a 20 00 98 [ 7.268019] usb 1-4.3: new high-speed USB device number 5 using ehci-pci [ 7.287049] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 62 [ 7.287067] Raw EDID: [ 7.287074] 00 ff ff ff ff ff ff 00 10 ac 0b a0 53 4b 55 33 [ 7.287082] 2c 0e 01 03 68 22 1b 78 ee ca f6 a3 57 47 9e 23 [ 7.287090] 11 4f 54 a5 4b 00 71 4f 81 80 01 01 01 01 01 01 [ 7.287097] 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70 [ 7.287105] 13 00 52 0e 11 00 00 1e 00 00 00 fd 00 38 4b 1f [ 7.287112] 50 0e 00 0a 20 20 20 20 20 20 00 00 00 ff 00 44 [ 7.287120] 35 34 32 38 34 41 55 33 55 4b 53 0a 00 00 00 fc [ 7.287127] 00 44 45 4c 4c 20 45 31 37 33 46 50 0a 20 00 98 [ 7.305052] firewire_ohci 0000:02:00.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0 [ 7.321041] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 62 [ 7.321059] Raw EDID: [ 7.321066] 00 ff ff ff ff ff ff 00 10 ac 0b a0 53 4b 55 33 [ 7.321074] 2c 0e 01 03 68 22 1b 78 ee ca f6 a3 57 47 9e 23 [ 7.321082] 11 4f 54 a5 4b 00 71 4f 81 80 01 01 01 01 01 01 [ 7.321089] 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70 [ 7.321097] 13 00 52 0e 11 00 00 1e 00 00 00 fd 00 38 4b 1f [ 7.321104] 50 0e 00 0a 20 20 20 20 20 20 00 00 00 ff 00 44 [ 7.321112] 35 34 32 38 34 41 55 33 55 4b 53 0a 00 00 00 fc [ 7.321119] 00 44 45 4c 4c 20 45 31 37 33 46 50 0a 20 00 98 [ 7.335820] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 7.349149] usb 1-4.3: New USB device found, idVendor=14cd, idProduct=125d [ 7.349165] usb 1-4.3: New USB device strings: Mfr=1, Product=3, SerialNumber=2 [ 7.349178] usb 1-4.3: Product: Mass Storage Device [ 7.349186] usb 1-4.3: Manufacturer: Generic [ 7.349193] usb 1-4.3: SerialNumber: 125D20140310 [ 7.356045] [drm:drm_edid_block_valid [drm]] *ERROR* EDID checksum is invalid, remainder is 62 [ 7.356063] Raw EDID: [ 7.356070] 00 ff ff ff ff ff ff 00 10 ac 0b a0 53 4b 55 33 [ 7.356078] 2c 0e 01 03 68 22 1b 78 ee ca f6 a3 57 47 9e 23 [ 7.356086] 11 4f 54 a5 4b 00 71 4f 81 80 01 01 01 01 01 01 [ 7.356093] 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70 [ 7.356101] 13 00 52 0e 11 00 00 1e 00 00 00 fd 00 38 4b 1f [ 7.356108] 50 0e 00 0a 20 20 20 20 20 20 00 00 00 ff 00 44 [ 7.356115] 35 34 32 38 34 41 55 33 55 4b 53 0a 00 00 00 fc [ 7.356123] 00 44 45 4c 4c 20 45 31 37 33 46 50 0a 20 00 98 [ 7.356134] i915 0000:00:02.0: VGA-1: EDID block 0 invalid. [ 7.444293] usb 1-4.4: new high-speed USB device number 6 using ehci-pci [ 7.465881] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line [ 7.465902] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 7.465915] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 7.465928] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0 [ 7.465936] snd_hda_codec_realtek hdaudioC0D2: inputs: [ 7.465945] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19 [ 7.465954] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18 [ 7.465963] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a [ 7.526432] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 7.526499] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 7.526555] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 7.526613] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 7.526671] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 7.526728] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 7.526786] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 7.526842] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 7.539110] intel_powerclamp: No package C-state available [ 7.542272] usb 1-4.4: New USB device found, idVendor=2001, idProduct=3c19 [ 7.542289] usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.542301] usb 1-4.4: Product: 11n Adapter [ 7.542309] usb 1-4.4: Manufacturer: Ralink [ 7.542316] usb 1-4.4: SerialNumber: 1.0 [ 7.604571] fbcon: inteldrmfb (fb0) is primary device [ 7.611237] coretemp coretemp.0: Using relative temperature scale! [ 7.661465] Console: switching to colour frame buffer device 128x48 [ 7.687151] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 7.812012] firewire_core 0000:02:00.0: created device fw0: GUID 0000d100810bbde9, S400 [ 8.389343] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 8.546229] dell_smm_hwmon: unable to get SMM Dell signature [ 9.450307] i2c /dev entries driver [ 10.397642] usb-storage 2-4:1.0: USB Mass Storage device detected [ 10.397804] scsi host6: usb-storage 2-4:1.0 [ 10.397981] usb-storage 1-4.3:1.0: USB Mass Storage device detected [ 10.398252] scsi host7: usb-storage 1-4.3:1.0 [ 10.398407] usbcore: registered new interface driver usb-storage [ 10.415843] hidraw: raw HID events driver (C) Jiri Kosina [ 10.428977] usbcore: registered new interface driver uas [ 10.496533] usbcore: registered new interface driver usbhid [ 10.496606] usbhid: USB HID core driver [ 10.520067] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:1C4F:0016.0001/input/input14 [ 10.575560] hid-generic 0003:1C4F:0016.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.1-1/input0 [ 10.586205] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/0003:1C4F:0016.0002/input/input15 [ 10.638278] hid-generic 0003:1C4F:0016.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1a.1-1/input1 [ 10.645125] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.2/1-4.2:1.0/0003:093A:2510.0003/input/input16 [ 10.651361] hid-generic 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1a.7-4.2/input0 [ 11.196043] usb 1-4.4: reset high-speed USB device number 6 using ehci-pci [ 11.289651] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0503 detected [ 11.323029] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected [ 11.326765] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 11.327761] usbcore: registered new interface driver rt2800usb [ 11.424713] scsi 6:0:0:0: Direct-Access SanDisk Cruzer 1.00 PQ: 0 ANSI: 2 [ 11.427959] scsi 7:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0 CCS [ 11.436708] sd 6:0:0:0: [sdc] 7837696 512-byte logical blocks: (4.01 GB/3.74 GiB) [ 11.440915] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 11.448257] sd 6:0:0:0: [sdc] Write Protect is off [ 11.451187] sd 6:0:0:0: [sdc] Mode Sense: 03 00 00 00 [ 11.452325] sd 6:0:0:0: [sdc] No Caching mode page found [ 11.455269] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 11.466964] sdc: sdc1 [ 11.476832] sd 6:0:0:0: [sdc] Attached SCSI removable disk [ 12.110503] Adding 5471228k swap on /dev/sda2. Priority:1 extents:1 across:5471228k [ 12.189209] fuse init (API version 7.25) [ 13.210310] EXT4-fs (sda1): re-mounted. Opts: (null) [ 21.522536] intel_powerclamp: No package C-state available [ 21.665166] dell_smm_hwmon: unable to get SMM Dell signature [ 26.984205] NET: Registered protocol family 10 [ 28.124215] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 28.202782] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 45.324882] usb 2-3: USB disconnect, device number 2 [ 51.777036] usb 2-3: new high-speed USB device number 4 using ehci-pci [ 51.898222] usb 2-3: New USB device found, idVendor=05ac, idProduct=12a8 [ 51.898226] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 51.898229] usb 2-3: Product: iPhone [ 51.898232] usb 2-3: Manufacturer: Apple Inc. [ 51.898235] usb 2-3: SerialNumber: 8ade58d089ed814752ec061af5a1d250b1076f9f [ 52.043469] ipheth 2-3:4.2: Apple iPhone USB Ethernet device attached [ 52.044772] usbcore: registered new interface driver ipheth [ 52.046499] ipheth 2-3:4.2 eth125: renamed from eth0 [ 52.046825] ipheth 2-3:4.2 eth1: renamed from eth125