[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4a8456e6-c6e9-73ac-0f5c-29e9faceb13c@free-electrons.com>
Date: Sun, 8 Jan 2017 11:48:09 +0100
From: Quentin Schulz <quentin.schulz@...e-electrons.com>
To: Jonathan Cameron <jic23@...nel.org>, Rob Herring <robh@...nel.org>
Cc: knaack.h@....de, lars@...afoo.de, pmeerw@...erw.net,
mark.rutland@....com, wens@...e.org, sre@...nel.org,
linux@...linux.org.uk, maxime.ripard@...e-electrons.com,
lee.jones@...aro.org, linux-iio@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
thomas.petazzoni@...e-electrons.com, icenowy@...c.xyz,
bonbons@...ux-vserver.org
Subject: Re: [PATCH 14/22] dt-bindings: power: supply: add AXP20X/AXP22X
battery DT binding
Hi Jonathan,
On 07/01/2017 20:33, Jonathan Cameron wrote:
> On 04/01/17 08:21, Rob Herring wrote:
>> On Mon, Jan 02, 2017 at 05:37:14PM +0100, Quentin Schulz wrote:
>>> The X-Powers AXP20X and AXP22X PMICs can have a battery as power supply.
>>>
>>> This patch adds the DT binding documentation for the battery power
>>> supply which gets various data from the PMIC, such as the battery status
>>> (charging, discharging, full, dead), current max limit, current current,
>>> battery capacity (in percentage), voltage max and min limits, current
>>> voltage and battery capacity (in Ah).
>>>
>>> Signed-off-by: Quentin Schulz <quentin.schulz@...e-electrons.com>
>>> ---
>>> .../bindings/power/supply/axp20x_battery.txt | 27 ++++++++++++++++++++++
>>> 1 file changed, 27 insertions(+)
>>> create mode 100644 Documentation/devicetree/bindings/power/supply/axp20x_battery.txt
>>>
>>> diff --git a/Documentation/devicetree/bindings/power/supply/axp20x_battery.txt b/Documentation/devicetree/bindings/power/supply/axp20x_battery.txt
>>> new file mode 100644
>>> index 0000000..5489d0d
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/power/supply/axp20x_battery.txt
>>> @@ -0,0 +1,27 @@
>>> +AXP20x and AXP22x battery power supply
>>> +
>>> +Required Properties:
>>> + - compatible, one of:
>>> + "x-powers,axp209-battery-power-supply"
>>> + "x-powers,axp221-battery-power-supply"
>>> + - io-channels: phandles to battery voltage, charge and discharge
>>> + currents ADC channels
>>> + - io-channel-names = "batt_v", "batt_chrg_i", "batt_dischrg_i";
>>> +
>>> +This node is a subnode of the axp20x/axp22x PMIC.
>>> +
>>> +The AXP20X and AXP22X can read the battery voltage, charge and discharge
>>> +currents of the battery by reading ADC channels from the AXP20X/AXP22X
>>> +ADC.
>>> +
>>> +Example:
>>> +
>>> +&axp209 {
>>> + battery_power_supply: battery_power_supply {
>>
>> Humm, I guess you power-supply is not sufficient, so
>> 'battery-power-supply' and similar for ac.
>>
>>> + compatible = "x-powers,axp209-battery-power-supply";
>>> + io-channels = <&axp209_adc 7>, <&axp209_adc 8>,
>>> + <&axp209_adc 9>;
>>> + io-channel-names = "batt_v", "batt_chrg_i",
>>> + "batt_dischrg_i";
> Is this stuff fixed for the device?
If we don't mix the IIO channels order, it is. This driver only requires
batt_v, batt_chrg_i and batt_dischrg_i so we've to keep them at that
place in the list of IIO channels. Or as suggested by Rob and Chen-Yu, I
can move all this inside the driver with iio_map and don't care anymore
about the order.
Thanks,
Quentin
--
Quentin Schulz, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Powered by blists - more mailing lists