| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <d6661ff6-442c-5535-aec2-35066577f119@kernel.org>
Date: Sat, 7 Jan 2017 14:31:57 -0500
From: Jonathan Cameron <jic23@...nel.org>
To: Quentin Schulz <quentin.schulz@...e-electrons.com>,
knaack.h@....de, lars@...afoo.de, pmeerw@...erw.net,
robh+dt@...nel.org, mark.rutland@....com, wens@...e.org,
sre@...nel.org, linux@...linux.org.uk,
maxime.ripard@...e-electrons.com, lee.jones@...aro.org
Cc: linux-iio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
thomas.petazzoni@...e-electrons.com, icenowy@...c.xyz,
bonbons@...ux-vserver.org
Subject: Re: [PATCH 08/22] power: supply: add AC power supply driver for
AXP20X and AXP22X PMICs
On 02/01/17 11:37, Quentin Schulz wrote:
> The X-Powers AXP20X and AXP22X PMICs expose the status of AC power
> supply.
>
> Moreover, the AXP20X can also expose the current current and voltage
> values of the AC power supply.
>
> This adds the driver which exposes the status of the AC power supply of
> the AXP20X and AXP22X PMICs.
>
> Signed-off-by: Quentin Schulz <quentin.schulz@...e-electrons.com>
For the IIO bits
Acked-by: Jonathan Cameron <jic23@...nel.org>
Trivial comment inline.
> ---
> drivers/power/supply/Kconfig | 12 ++
> drivers/power/supply/Makefile | 1 +
> drivers/power/supply/axp20x_ac_power.c | 251 +++++++++++++++++++++++++++++++++
> 3 files changed, 264 insertions(+)
> create mode 100644 drivers/power/supply/axp20x_ac_power.c
>
> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> index 76806a0..c552b4b 100644
> --- a/drivers/power/supply/Kconfig
> +++ b/drivers/power/supply/Kconfig
> @@ -214,6 +214,18 @@ config BATTERY_DA9150
> This driver can also be built as a module. If so, the module will be
> called da9150-fg.
>
> +config CHARGER_AXP20X
> + tristate "X-Powers AXP20X and AXP22X AC power supply driver"
> + depends on MFD_AXP20X
> + depends on AXP20X_ADC
> + depends on IIO
> + help
> + Say Y here to enable support for X-Powers AXP20X and AXP22X PMICs' AC
> + power supply.
> +
> + This driver can also be built as a module. If so, the module will be
> + called axp20x_ac_power.
> +
> config AXP288_CHARGER
> tristate "X-Powers AXP288 Charger"
> depends on MFD_AXP20X && EXTCON_AXP288
> diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
> index 36c599d..7d22417 100644
> --- a/drivers/power/supply/Makefile
> +++ b/drivers/power/supply/Makefile
> @@ -18,6 +18,7 @@ obj-$(CONFIG_TEST_POWER) += test_power.o
>
> obj-$(CONFIG_BATTERY_88PM860X) += 88pm860x_battery.o
> obj-$(CONFIG_BATTERY_ACT8945A) += act8945a_charger.o
> +obj-$(CONFIG_CHARGER_AXP20X) += axp20x_ac_power.o
> obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
> obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o
> obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o
> diff --git a/drivers/power/supply/axp20x_ac_power.c b/drivers/power/supply/axp20x_ac_power.c
> new file mode 100644
> index 0000000..d7bc25c
> --- /dev/null
> +++ b/drivers/power/supply/axp20x_ac_power.c
> @@ -0,0 +1,251 @@
> +/*
> + * AXP20X and AXP22X PMICs' ACIN power supply driver
> + *
> + * Copyright (C) 2016 Free Electrons
> + * Quentin Schulz <quentin.schulz@...e-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/axp20x.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/power_supply.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <linux/iio/consumer.h>
> +
> +#define AXP20X_PWR_STATUS_ACIN_PRESENT BIT(7)
> +#define AXP20X_PWR_STATUS_ACIN_AVAIL BIT(6)
> +
> +#define DRVNAME "axp20x-ac-power-supply"
> +
> +struct axp20x_ac_power {
> + struct device_node *np;
> + struct regmap *regmap;
> + struct power_supply *supply;
> + int axp20x_id;
> + struct iio_channel *acin_v;
> + struct iio_channel *acin_i;
> +};
> +
> +static irqreturn_t axp20x_ac_power_irq(int irq, void *devid)
> +{
> + struct axp20x_ac_power *power = devid;
> +
> + power_supply_changed(power->supply);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int axp20x_ac_power_get_property(struct power_supply *psy,
> + enum power_supply_property psp,
> + union power_supply_propval *val)
> +{
> + struct axp20x_ac_power *power = power_supply_get_drvdata(psy);
> + int ret, reg;
> +
> + switch (psp) {
> + case POWER_SUPPLY_PROP_HEALTH:
> + ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, ®);
> + if (ret)
> + return ret;
> +
> + if (reg & AXP20X_PWR_STATUS_ACIN_PRESENT) {
> + val->intval = POWER_SUPPLY_HEALTH_GOOD;
> + return 0;
> + }
> +
> + val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
> + return 0;
> +
> + case POWER_SUPPLY_PROP_PRESENT:
> + ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, ®);
> + if (ret)
> + return ret;
> +
> + val->intval = !!(reg & AXP20X_PWR_STATUS_ACIN_PRESENT);
> + return 0;
> +
> + case POWER_SUPPLY_PROP_ONLINE:
> + ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, ®);
> + if (ret)
> + return ret;
> +
> + val->intval = !!(reg & AXP20X_PWR_STATUS_ACIN_AVAIL);
> + return 0;
> +
> + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> + ret = iio_read_channel_processed(power->acin_v, &val->intval);
> + if (ret)
> + return ret;
> +
> + /*
> + * IIO framework gives mV but Power Supply framework gives µV.
> + */
single line comment syntax throughout or we'll have to face a patch 'fixing' it.
> + val->intval *= 1000;
> +
> + return 0;
> +
> + case POWER_SUPPLY_PROP_CURRENT_NOW:
> + ret = iio_read_channel_processed(power->acin_i, &val->intval);
> + if (ret)
> + return ret;
> +
> + /*
> + * IIO framework gives mV but Power Supply framework gives µV.
> + */
> + val->intval *= 1000;
> +
> + return 0;
> +
> + default:
> + return -EINVAL;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static enum power_supply_property axp20x_ac_power_properties[] = {
> + POWER_SUPPLY_PROP_HEALTH,
> + POWER_SUPPLY_PROP_PRESENT,
> + POWER_SUPPLY_PROP_ONLINE,
> + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> + POWER_SUPPLY_PROP_CURRENT_NOW,
> +};
> +
> +static enum power_supply_property axp22x_ac_power_properties[] = {
> + POWER_SUPPLY_PROP_HEALTH,
> + POWER_SUPPLY_PROP_PRESENT,
> + POWER_SUPPLY_PROP_ONLINE,
> +};
> +
> +static const struct power_supply_desc axp20x_ac_power_desc = {
> + .name = "axp20x-ac",
> + .type = POWER_SUPPLY_TYPE_MAINS,
> + .properties = axp20x_ac_power_properties,
> + .num_properties = ARRAY_SIZE(axp20x_ac_power_properties),
> + .get_property = axp20x_ac_power_get_property,
> +};
> +
> +static const struct power_supply_desc axp22x_ac_power_desc = {
> + .name = "axp22x-ac",
> + .type = POWER_SUPPLY_TYPE_MAINS,
> + .properties = axp22x_ac_power_properties,
> + .num_properties = ARRAY_SIZE(axp22x_ac_power_properties),
> + .get_property = axp20x_ac_power_get_property,
> +};
> +
> +static int axp20x_ac_power_probe(struct platform_device *pdev)
> +{
> + struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
> + struct power_supply_config psy_cfg = {};
> + struct axp20x_ac_power *power;
> + static const char * const axp20x_irq_names[] = { "ACIN_PLUGIN",
> + "ACIN_REMOVAL", NULL };
> + static const char * const *irq_names;
> + const struct power_supply_desc *ac_power_desc;
> + int i, irq, ret;
> +
> + if (!of_device_is_available(pdev->dev.of_node))
> + return -ENODEV;
> +
> + if (!axp20x) {
> + dev_err(&pdev->dev, "Parent drvdata not set\n");
> + return -EINVAL;
> + }
> +
> + power = devm_kzalloc(&pdev->dev, sizeof(*power), GFP_KERNEL);
> + if (!power)
> + return -ENOMEM;
> +
> + power->axp20x_id = (int)of_device_get_match_data(&pdev->dev);
> +
> + irq_names = axp20x_irq_names;
> +
> + if (power->axp20x_id == AXP202_ID) {
> + ac_power_desc = &axp20x_ac_power_desc;
> +
> + power->acin_v = devm_iio_channel_get(&pdev->dev, "acin_v");
> + if (IS_ERR(power->acin_v)) {
> + if (PTR_ERR(power->acin_v) == -ENODEV)
> + return -EPROBE_DEFER;
> + return PTR_ERR(power->acin_v);
> + }
> +
> + power->acin_i = devm_iio_channel_get(&pdev->dev, "acin_i");
> + if (IS_ERR(power->acin_i)) {
> + if (PTR_ERR(power->acin_i) == -ENODEV)
> + return -EPROBE_DEFER;
> + return PTR_ERR(power->acin_i);
> + }
> + } else {
> + ac_power_desc = &axp22x_ac_power_desc;
> + }
> +
> + power->np = pdev->dev.of_node;
> + power->regmap = axp20x->regmap;
> +
> + platform_set_drvdata(pdev, power);
> +
> + psy_cfg.of_node = pdev->dev.of_node;
> + psy_cfg.drv_data = power;
> +
> + power->supply = devm_power_supply_register(&pdev->dev, ac_power_desc,
> + &psy_cfg);
> + if (IS_ERR(power->supply))
> + return PTR_ERR(power->supply);
> +
> + /* Request irqs after registering, as irqs may trigger immediately */
> + for (i = 0; irq_names[i]; i++) {
> + irq = platform_get_irq_byname(pdev, irq_names[i]);
> + if (irq < 0) {
> + dev_warn(&pdev->dev, "No IRQ for %s: %d\n",
> + irq_names[i], irq);
> + continue;
> + }
> + irq = regmap_irq_get_virq(axp20x->regmap_irqc, irq);
> + ret = devm_request_any_context_irq(&pdev->dev, irq,
> + axp20x_ac_power_irq, 0,
> + DRVNAME, power);
> + if (ret < 0)
> + dev_warn(&pdev->dev, "Error requesting %s IRQ: %d\n",
> + irq_names[i], ret);
> + }
> +
> + return 0;
> +}
> +
> +static const struct of_device_id axp20x_ac_power_match[] = {
> + {
> + .compatible = "x-powers,axp202-ac-power-supply",
> + .data = (void *)AXP202_ID,
> + }, {
> + .compatible = "x-powers,axp221-ac-power-supply",
> + .data = (void *)AXP221_ID,
> + }, { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, axp20x_ac_power_match);
> +
> +static struct platform_driver axp20x_ac_power_driver = {
> + .probe = axp20x_ac_power_probe,
> + .driver = {
> + .name = DRVNAME,
> + .of_match_table = axp20x_ac_power_match,
> + },
> +};
> +
> +module_platform_driver(axp20x_ac_power_driver);
> +
> +MODULE_AUTHOR("Quentin Schulz <quentin.schulz@...e-electrons.com>");
> +MODULE_DESCRIPTION("AXP20X and AXP22X PMICs' AC power supply driver");
> +MODULE_LICENSE("GPL");
>
Powered by blists - more mailing lists