| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20170109030023.GK20956@dragon>
Date: Mon, 9 Jan 2017 11:00:25 +0800
From: Shawn Guo <shawnguo@...nel.org>
To: Baoyou Xie <baoyou.xie@...aro.org>
Cc: rui.zhang@...el.com, edubezval@...il.com, robh+dt@...nel.org,
mark.rutland@....com, jun.nie@...aro.org,
gregkh@...uxfoundation.org, davem@...emloft.net,
geert+renesas@...der.be, akpm@...ux-foundation.org,
mchehab@...nel.org, linux@...ck-us.net, linux-pm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, xie.baoyou@....com.cn,
chen.chaokai@....com.cn, wang.qiang01@....com.cn
Subject: Re: [PATCH v1 3/3] thermal: zx2967: add thermal driver for ZTE's
zx2967 family
On Sat, Jan 07, 2017 at 01:38:08PM +0800, Baoyou Xie wrote:
> This patch adds thermal driver for ZTE's zx2967 family.
>
> Signed-off-by: Baoyou Xie <baoyou.xie@...aro.org>
> ---
> drivers/thermal/Kconfig | 6 +
> drivers/thermal/Makefile | 1 +
> drivers/thermal/zx2967_thermal.c | 241 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 248 insertions(+)
> create mode 100644 drivers/thermal/zx2967_thermal.c
>
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 18f2de6..0dd597e 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -445,3 +445,9 @@ config BCM2835_THERMAL
> Support for thermal sensors on Broadcom bcm2835 SoCs.
>
> endif
> +
> +config ZX2967_THERMAL
> + tristate "Thermal sensors on zx2967 SoC"
> + depends on ARCH_ZX
> + help
> + Support for thermal sensors on ZTE zx2967 SoCs.
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 677c6d9..c00c05e 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -57,3 +57,4 @@ obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o
> obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o
> obj-$(CONFIG_GENERIC_ADC_THERMAL) += thermal-generic-adc.o
> obj-$(CONFIG_BCM2835_THERMAL) += bcm2835_thermal.o
> +obj-$(CONFIG_ZX2967_THERMAL) += zx2967_thermal.o
> diff --git a/drivers/thermal/zx2967_thermal.c b/drivers/thermal/zx2967_thermal.c
> new file mode 100644
> index 0000000..1aef070
> --- /dev/null
> +++ b/drivers/thermal/zx2967_thermal.c
> @@ -0,0 +1,241 @@
> +/*
> + * ZTE's zx2967 family thermal sensor driver
> + *
> + * Copyright (C) 2017 ZTE Ltd.
> + *
> + * Author: Baoyou Xie <baoyou.xie@...aro.org>
> + *
> + * License terms: GNU General Public License (GPL) version 2
> + */
> +
> +#include <linux/module.h>
> +#include <linux/device.h>
> +#include <linux/io.h>
> +#include <linux/err.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/platform_device.h>
> +#include <linux/thermal.h>
> +
> +/* DCF Control Register */
> +#define ZX2967_THERMAL_DCF 0x4
> +
> +/* Selection Register */
> +#define ZX2967_THERMAL_SEL 0x8
> +
> +/* Control Register */
> +#define ZX2967_THERMAL_CTRL 0x10
> +
> +#define ZX2967_THERMAL_ID_MASK (0x18)
> +
> +struct zx2967_thermal_sensor {
> + struct zx2967_thermal_priv *priv;
> + struct thermal_zone_device *tzd;
> + int id;
> +};
> +
> +#define NUM_SENSORS 1
> +
> +struct zx2967_thermal_priv {
> + struct zx2967_thermal_sensor sensors[NUM_SENSORS];
What's the point of defining an array with only one element?
> + struct mutex lock;
> + struct clk *clk_gate;
> + struct clk *pclk;
> + void __iomem *regs;
> + struct pinctrl *pinmux_dvi0_d3;
> + struct pinctrl *pinmux_dvi0_d4;
> + struct pinctrl *pinmux_dvi0_d5;
These three pointers are not used.
> +};
> +
> +static int zx2967_thermal_suspend(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct zx2967_thermal_priv *priv = platform_get_drvdata(pdev);
> +
> + if (priv && priv->pclk)
> + clk_disable_unprepare(priv->pclk);
> +
> + if (priv && priv->clk_gate)
> + clk_disable_unprepare(priv->clk_gate);
> + dev_info(dev, "suspended\n");
Noisy message.
> +
> + return 0;
> +}
> +
> +static int zx2967_thermal_resume(struct device *dev)
> +{
> + struct platform_device *pdev = to_platform_device(dev);
> + struct zx2967_thermal_priv *priv = platform_get_drvdata(pdev);
> + int error;
> +
> + error = clk_prepare_enable(priv->clk_gate);
> + if (error)
> + return error;
> +
> + error = clk_prepare_enable(priv->pclk);
> + if (error)
> + return error;
clk_disable_unprepare() should be called for priv->clk_gate before
returning here.
> +
> + dev_info(dev, "resumed\n");
> +
> + return 0;
> +}
> +
> +static int zx2967_thermal_get_temp(void *data, int *temp)
> +{
> + void __iomem *regs;
> + struct zx2967_thermal_sensor *sensor = data;
> + struct zx2967_thermal_priv *priv = sensor->priv;
> + unsigned long timeout = jiffies + msecs_to_jiffies(100);
> + u32 val, sel_id;
> +
> + regs = priv->regs;
> + mutex_lock(&priv->lock);
> +
> + writel_relaxed(0, regs);
I suggest we have a macro for register at offset 0 as well to improve
the readability.
> + writel_relaxed(2, regs + ZX2967_THERMAL_DCF);
> +
> + val = readl_relaxed(regs + ZX2967_THERMAL_SEL);
> + val &= ~ZX2967_THERMAL_ID_MASK;
> + sel_id = sensor->id ? 8 : 0x10;
> + val |= sel_id;
> + writel_relaxed(val, regs + ZX2967_THERMAL_SEL);
> +
> + usleep_range(100, 300);
> + while (!(readl_relaxed(regs + ZX2967_THERMAL_CTRL) & 0x1000)) {
> + if (time_after(jiffies, timeout)) {
> + pr_err("*** Thermal sensor %d data timeout\n",
> + sensor->id);
dev_err? And drop "*** ".
> + mutex_unlock(&priv->lock);
> + return -EIO;
-ETIMEDOUT?
> + }
> + }
> +
> + writel_relaxed(3, regs + ZX2967_THERMAL_DCF);
> + val = readl_relaxed(regs + ZX2967_THERMAL_CTRL) & 0xfff;
> + writel_relaxed(1, regs);
> +
> + /** Calculate temperature */
> + *temp = DIV_ROUND_CLOSEST((val - 922) * 1000, 1951);
> +
> + mutex_unlock(&priv->lock);
> +
> + return 0;
> +}
> +
> +static struct thermal_zone_of_device_ops zx2967_of_thermal_ops = {
> + .get_temp = zx2967_thermal_get_temp,
> +};
> +
> +static int zx2967_thermal_probe(struct platform_device *pdev)
> +{
> + struct zx2967_thermal_priv *priv;
> + struct resource *res;
> + int ret, i;
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + priv->regs = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(priv->regs))
> + return PTR_ERR(priv->regs);
> +
> + priv->clk_gate = devm_clk_get(&pdev->dev, "tempsensor_gate");
> + if (IS_ERR(priv->clk_gate)) {
> + ret = PTR_ERR(priv->clk_gate);
> + dev_err(&pdev->dev, "failed to get clock gate: %d\n", ret);
> + return ret;
> + }
> +
> + ret = clk_prepare_enable(priv->clk_gate);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to enable converter clock: %d\n",
> + ret);
> + return ret;
> + }
> +
> + priv->pclk = devm_clk_get(&pdev->dev, "tempsensor_pclk");
> + if (IS_ERR(priv->pclk)) {
> + ret = PTR_ERR(priv->pclk);
> + dev_err(&pdev->dev, "failed to get apb clock: %d\n", ret);
> + return ret;
> + }
> +
> + ret = clk_prepare_enable(priv->pclk);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to enable converter clock: %d\n",
> + ret);
> + return ret;
The use count of enable and prepare on priv->clk_gate will be
unbalanced.
> + }
> +
> + mutex_init(&priv->lock);
> + for (i = 0; i < NUM_SENSORS; i++) {
> + struct zx2967_thermal_sensor *sensor = &priv->sensors[i];
> +
> + sensor->priv = priv;
> + sensor->id = i;
> + sensor->tzd = thermal_zone_of_sensor_register(&pdev->dev,
> + i,
> + sensor,
> + &zx2967_of_thermal_ops);
> + if (IS_ERR(sensor->tzd)) {
> + ret = PTR_ERR(sensor->tzd);
> + dev_err(&pdev->dev, "failed to register sensor %d: %d\n",
> + i, ret);
> + goto remove_ts;
> + }
> + }
> + platform_set_drvdata(pdev, priv);
> +
> + return 0;
> +
> +remove_ts:
> + for (i--; i >= 0; i--)
> + thermal_zone_of_sensor_unregister(&pdev->dev,
> + priv->sensors[i].tzd);
> +
> + return ret;
Unbalanced clk_prepare_enable(priv->pclk).
Shawn
> +}
> +
> +static int zx2967_thermal_exit(struct platform_device *pdev)
> +{
> + struct zx2967_thermal_priv *priv = platform_get_drvdata(pdev);
> + int i;
> +
> + for (i = 0; i < NUM_SENSORS; i++) {
> + struct zx2967_thermal_sensor *sensor = &priv->sensors[i];
> +
> + thermal_zone_of_sensor_unregister(&pdev->dev, sensor->tzd);
> + }
> + clk_disable_unprepare(priv->pclk);
> + clk_disable_unprepare(priv->clk_gate);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id zx2967_thermal_id_table[] = {
> + { .compatible = "zte,zx2967-thermal" },
> + { .compatible = "zte,zx296718-thermal" },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, zx2967_thermal_id_table);
> +
> +static SIMPLE_DEV_PM_OPS(zx2967_thermal_pm_ops,
> + zx2967_thermal_suspend, zx2967_thermal_resume);
> +
> +static struct platform_driver zx2967_thermal_driver = {
> + .probe = zx2967_thermal_probe,
> + .remove = zx2967_thermal_exit,
> + .driver = {
> + .name = "zx2967_thermal",
> + .of_match_table = zx2967_thermal_id_table,
> + .pm = &zx2967_thermal_pm_ops,
> + },
> +};
> +module_platform_driver(zx2967_thermal_driver);
> +
> +MODULE_AUTHOR("Baoyou Xie <baoyou.xie@...aro.org>");
> +MODULE_DESCRIPTION("ZTE zx2967 thermal driver");
> +MODULE_LICENSE("GPL");
> --
> 2.7.4
>
Powered by blists - more mailing lists