[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20170110053543.ir5alv727d23c6wm@rob-hp-laptop>
Date: Mon, 9 Jan 2017 23:35:43 -0600
From: Rob Herring <robh@...nel.org>
To: Jonathan Cameron <jic23@...nel.org>
Cc: Allen Liu <liurenzhong@...ilicon.com>, knaack.h@....de,
lars@...afoo.de, pmeerw@...erw.net, mark.rutland@....com,
akinobu.mita@...il.com, ludovic.desroches@...el.com,
krzk@...nel.org, vilhelm.gray@...il.com,
ksenija.stanojevic@...il.com, zhiyong.tao@...iatek.com,
daniel.baluta@...el.com, leonard.crestez@...el.com,
ray.jui@...adcom.com, raveendra.padasalagi@...adcom.com,
mranostay@...il.com, amsfield22@...il.com,
linux-iio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, xuejiancheng@...ilicon.com,
kevin.lixu@...ilicon.com
Subject: Re: [PATCH] adc: add adc driver for Hisilicon BVT SOCs
On Sat, Jan 07, 2017 at 12:51:31PM -0500, Jonathan Cameron wrote:
> On 07/01/17 05:16, Allen Liu wrote:
> > Add ADC driver for the ADC controller found on HiSilicon BVT SOCs, like Hi3516CV300, etc.
> > The ADC controller is primarily in charge of detecting voltage.
> >
> > Reviewed-by: Kevin Li <kevin.lixu@...ilicon.com>
> > Signed-off-by: Allen Liu <liurenzhong@...ilicon.com>
> Hi Allen,
>
> One quick submission process note first. It is very important to clearly identify new
> versions of a patch and what changes have occurred since the previous posting.
>
> So the email title should have been [PATCH V2] adc...
>
> Also, below the --- please add a brief change log.
>
> The driver is coming together nicely. A few minor points inline.
>
> Jonathan
> > ---
> > .../devicetree/bindings/iio/adc/hibvt-lsadc.txt | 23 ++
> > drivers/iio/adc/Kconfig | 10 +
> > drivers/iio/adc/Makefile | 1 +
> > drivers/iio/adc/hibvt_lsadc.c | 335 +++++++++++++++++++++
> > 4 files changed, 369 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/iio/adc/hibvt-lsadc.txt
> > create mode 100644 drivers/iio/adc/hibvt_lsadc.c
> >
> > diff --git a/Documentation/devicetree/bindings/iio/adc/hibvt-lsadc.txt b/Documentation/devicetree/bindings/iio/adc/hibvt-lsadc.txt
> > new file mode 100644
> > index 0000000..fce1ff4
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/adc/hibvt-lsadc.txt
> > @@ -0,0 +1,23 @@
> > +Hisilicon BVT Low Speed (LS) A/D Converter bindings
> > +
> > +Required properties:
> > +- compatible: should be "hisilicon,<name>-lsadc"
> > + - "hisilicon,hi3516cv300-lsadc": for hi3516cv300
> > +
> > +- reg: physical base address of the controller and length of memory mapped
> > + region.
> > +- interrupts: The interrupt number for the ADC device.
> Ideally refer to the standard interrupt binding document.
> Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
>
> > +
> > +Optional properties:
> > +- resets: Must contain an entry for each entry in reset-names if need support
> > + this option. See ../../reset/reset.txt for details.
> Don't use a relative path in a binding document. It's far too likely to
> be broken by a reorganization of the docs and cannot be grepped for.
However, in the filtered DT tree, the base path is already different. I
haven't looked but I'm sure we have a mixture of different forms.
My preference would be just "reset/reset.txt" or ".../reset/reset.txt".
We generally try to avoid bindings referring to other kernel docs, so
this should be sufficient.
Rob
Powered by blists - more mailing lists