Message-ID: <20170110064935.GB20956@dragon>
Date:   Tue, 10 Jan 2017 14:49:36 +0800
From:   Shawn Guo <shawnguo@...nel.org>
To:     Sébastien Szymanski 
        <sebastien.szymanski@...adeus.com>
Cc:     linux-arm-kernel@...ts.infradead.org,
        Mark Rutland <mark.rutland@....com>,
        devicetree@...r.kernel.org, Russell King <linux@...linux.org.uk>,
        linux-kernel@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
        Sascha Hauer <kernel@...gutronix.de>,
        Fabio Estevam <fabio.estevam@....com>,
        Julien Boibessot <julien.boibessot@...adeus.com>
Subject: Re: [PATCH 1/1] ARM: dts: add Armadeus Systems OPOS6UL AND
 OPOS6ULDEV support

On Mon, Jan 09, 2017 at 05:00:18PM +0100, Sébastien Szymanski wrote:
> OPOS6UL is an i.MX6UL based SoM.
> OPOS6ULDev is a carrier board for the OPOS6UL SoM.
> 
> For more details see:
> http://www.opossom.com/english/products-processor_boards-opos6ul.html
> http://www.opossom.com/english/products-development_boards-opos6ul_dev.html
> 
> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@...adeus.com>

s/AND/and in patch subject.

> ---
>  arch/arm/boot/dts/Makefile              |   1 +
>  arch/arm/boot/dts/imx6ul-opos6ul.dtsi   | 192 +++++++++++++++
>  arch/arm/boot/dts/imx6ul-opos6uldev.dts | 414 ++++++++++++++++++++++++++++++++
>  3 files changed, 607 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6ul-opos6ul.dtsi
>  create mode 100644 arch/arm/boot/dts/imx6ul-opos6uldev.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 7327250..f839c75 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -435,6 +435,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
>  	imx6ul-14x14-evk.dtb \
>  	imx6ul-geam-kit.dtb \
>  	imx6ul-liteboard.dtb \
> +	imx6ul-opos6uldev.dtb \
>  	imx6ul-pico-hobbit.dtb \
>  	imx6ul-tx6ul-0010.dtb \
>  	imx6ul-tx6ul-0011.dtb \
> diff --git a/arch/arm/boot/dts/imx6ul-opos6ul.dtsi b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi
> new file mode 100644
> index 0000000..4673dde
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6ul-opos6ul.dtsi
> @@ -0,0 +1,192 @@
> +/*
> + * Copyright 2016 Armadeus Systems <support@...adeus.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of
> + *     the License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + *     You should have received a copy of the GNU General Public
> + *     License along with this file; if not, write to the Free
> + *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
> + *     MA 02110-1301 USA
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include "imx6ul.dtsi"
> +
> +/ {
> +	memory {
> +		reg = <0x80000000 0>; /* will be filled by U-Boot */
> +	};
> +
> +	reg_3v3: regulator-3v3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +	};
> +
> +	usdhc3_pwrseq: usdhc3_pwrseq {
> +		compatible = "mmc-pwrseq-simple";
> +		reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
> +	};
> +};
> +
> +&fec1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_enet1>;
> +	phy-mode = "rmii";
> +	phy-reset-duration = <1>;
> +	phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
> +	phy-handle = <&ethphy1>;
> +	phy-supply = <&reg_3v3>;
> +	status = "okay";
> +
> +	mdio: mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ethphy1: ethernet-phy@1 {
> +			compatible = "ethernet-phy-ieee802.3-c22";
> +			reg = <1>;
> +			interrupt-parent = <&gpio4>;
> +			interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
> +			status = "okay";
> +		};
> +	};
> +};
> +
> +/* Bluetooth */
> +&uart8 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart8>;
> +	fsl,uart-has-rtscts;

Use generic one "uart-has-rtscts" instead.

> +	status = "okay";
> +};
> +
> +/* eMMC */
> +&usdhc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc1>;
> +	bus-width = <8>;
> +	no-1-8-v;
> +	non-removable;
> +	status = "okay";
> +};
> +
> +/* WiFi */
> +&usdhc2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc2>;
> +	bus-width = <4>;
> +	no-1-8-v;
> +	non-removable;
> +	mmc-pwrseq = <&usdhc3_pwrseq>;
> +	status = "okay";
> +
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	brcmf: bcrmf@1 {
> +		compatible = "brcm,bcm4329-fmac";
> +		reg = <1>;
> +		interrupt-parent = <&gpio2>;
> +		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-names = "host-wake";
> +	};
> +};
> +
> +&iomuxc {
> +	pinctrl_enet1: enet1grp {
> +		fsl,pins = <
> +			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
> +			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
> +			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x130b0
> +			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x130b0
> +			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x130b0
> +			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x130b0
> +			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
> +			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
> +			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
> +			/* INT# */
> +			MX6UL_PAD_NAND_DQS__GPIO4_IO16		0x1b0b0
> +			/* RST# */
> +			MX6UL_PAD_NAND_DATA00__GPIO4_IO02	0x130b0
> +			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
> +		>;
> +	};
> +
> +	pinctrl_uart8: uart8grp {
> +		fsl,pins = <
> +			MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX	0x1b0b0
> +			MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX	0x1b0b0
> +			MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS	0x1b0b0
> +			MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS	0x1b0b0
> +			/* BT_REG_ON */
> +			MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x130b0
> +		>;
> +	};
> +
> +	pinctrl_usdhc1: usdhc1grp {
> +		fsl,pins = <
> +			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
> +			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
> +			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
> +			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
> +			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
> +			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
> +			MX6UL_PAD_NAND_READY_B__USDHC1_DATA4	0x17059
> +			MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5	0x17059
> +			MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6	0x17059
> +			MX6UL_PAD_NAND_CLE__USDHC1_DATA7	0x17059
> +		>;
> +	};
> +
> +	pinctrl_usdhc2: usdhc2grp {
> +		fsl,pins = <
> +			MX6UL_PAD_LCD_DATA18__USDHC2_CMD	0x1b0b0
> +			MX6UL_PAD_LCD_DATA19__USDHC2_CLK	0x100b0
> +			MX6UL_PAD_LCD_DATA20__USDHC2_DATA0	0x1b0b0
> +			MX6UL_PAD_LCD_DATA21__USDHC2_DATA1	0x1b0b0
> +			MX6UL_PAD_LCD_DATA22__USDHC2_DATA2	0x1b0b0
> +			MX6UL_PAD_LCD_DATA23__USDHC2_DATA3	0x1b0b0
> +			/* WL_REG_ON */
> +			MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x130b0
> +			/* WL_IRQ */
> +			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x1b0b0
> +		>;
> +	};
> +};
> diff --git a/arch/arm/boot/dts/imx6ul-opos6uldev.dts b/arch/arm/boot/dts/imx6ul-opos6uldev.dts
> new file mode 100644
> index 0000000..a373562
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6ul-opos6uldev.dts
> @@ -0,0 +1,414 @@
> +/*
> + * Copyright 2016 Armadeus Systems <support@...adeus.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of
> + *     the License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + *     You should have received a copy of the GNU General Public
> + *     License along with this file; if not, write to the Free
> + *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
> + *     MA 02110-1301 USA
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "imx6ul-opos6ul.dtsi"
> +
> +/ {
> +	model = "Armadeus Systems OPOS6UL SoM on OPOS6ULDev board";
> +	compatible = "armadeus,opos6uldev", "armadeus,opos6ul", "fsl,imx6ul";
> +
> +	chosen {
> +		stdout-path = &uart1;
> +	};
> +
> +	lcd_backlight {

s/lcd_backlight/backlight.  The node name should be generic, while label
name can be specific.

> +		compatible = "pwm-backlight";
> +		pwms = <&pwm3 0 191000>;
> +		brightness-levels = <0 4 8 16 32 64 128 255>;
> +		default-brightness-level = <7>;
> +		power-supply = <&reg_5v>;
> +		status = "okay";
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_gpio_keys>;
> +
> +		user-button {
> +			label = "User button";
> +			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
> +			linux,code = <BTN_MISC>;
> +			wakeup-source;
> +		};
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		user_led {

Hyphen instead of underscore should be used in node name, while
underscore should be used in label name.

> +			label = "User";
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_led>;
> +			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +
> +	onewire {
> +		compatible = "w1-gpio";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_w1>;
> +		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
> +		status = "okay";

The "status" line is not really needed for this case.

> +	};
> +
> +	reg_5v: regulator-5v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "5V";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +	};
> +
> +	reg_usbotg1_vbus: regulator-usbotg1vbus {
> +		compatible = "regulator-fixed";
> +		regulator-name = "usbotg1vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_usbotg1_vbus>;
> +		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	reg_usbotg2_vbus: regulator-usbotg2vbus {
> +		compatible = "regulator-fixed";
> +		regulator-name = "usbotg2vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_usbotg2_vbus>;
> +		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +};
> +
> +&pwm3 {

This node is not sorted.

> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm3>;
> +	status = "okay";
> +};
> +
> +&adc1 {
> +	vref-supply = <&reg_3v3>;
> +	status = "okay";
> +};
> +
> +&can1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexcan1>;
> +	xceiver-supply = <&reg_5v>;
> +	status = "okay";
> +};
> +
> +&can2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexcan2>;
> +	xceiver-supply = <&reg_5v>;
> +	status = "okay";
> +};
> +
> +&ecspi4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi4>;
> +	fsl,spi-num-chipselects = <2>;

This property is obsolete.  Drop it.

> +	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
> +	status = "okay";
> +
> +	spidev0: spi@0 {
> +		compatible = "spidev";
> +		reg = <0>;
> +		spi-max-frequency = <5000000>;
> +	};
> +
> +	spidev1: spi@1 {
> +		compatible = "spidev";
> +		reg = <1>;
> +		spi-max-frequency = <5000000>;
> +	};
> +};
> +
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	clock_frequency = <400000>;
> +	status = "okay";
> +};
> +
> +&i2c2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	clock_frequency = <400000>;
> +	status = "okay";
> +};
> +
> +&lcdif {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_lcdif>;
> +	display = <&display0>;
> +	lcd-supply = <&reg_3v3>;
> +	status = "okay";
> +
> +	display0: display0 {
> +		bits-per-pixel = <32>;
> +		bus-width = <18>;
> +
> +		display-timings {
> +			timing0: timing0 {
> +				clock-frequency = <33000033>;
> +				hactive = <800>;
> +				vactive = <480>;
> +				hback-porch = <96>;
> +				hfront-porch = <96>;
> +				vback-porch = <20>;
> +				vfront-porch = <21>;
> +				hsync-len = <64>;
> +				vsync-len = <4>;
> +				de-active = <1>;
> +				pixelclk-active = <0>;
> +			};
> +		};
> +	};
> +};
> +
> +&snvs_pwrkey {
> +	status = "disabled";
> +};
> +
> +&tsc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_tsc>;
> +	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
> +	measure-delay-time = <0xffff>;
> +	pre-charge-time = <0xffff>;
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart2>;
> +	status = "okay";
> +};
> +
> +&usbotg1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usbotg1_id>;
> +	vbus-supply = <&reg_usbotg1_vbus>;
> +	dr_mode = "otg";
> +	disable-over-current;
> +	status = "okay";
> +};
> +
> +&usbotg2 {
> +	vbus-supply = <&reg_usbotg2_vbus>;
> +	dr_mode = "host";
> +	disable-over-current;
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_gpios>;
> +
> +	pinctrl_pwm3: pwm3grp {

This one is not sorted.

> +		fsl,pins = <
> +			MX6UL_PAD_NAND_ALE__PWM3_OUT		0x1b0b0
> +		>;
> +	};
> +
> +	pinctrl_ecspi4: ecspi4grp {
> +		fsl,pins = <
> +			MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK	0x1b0b0
> +			MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI	0x1b0b0
> +			MX6UL_PAD_NAND_DATA06__ECSPI4_MISO	0x1b0b0
> +			MX6UL_PAD_NAND_DATA01__GPIO4_IO03	0x1b0b0
> +			MX6UL_PAD_NAND_DATA07__GPIO4_IO09	0x1b0b0
> +		>;
> +	};
> +
> +	pinctrl_flexcan1: flexcan1grp {
> +		fsl,pins = <
> +			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
> +			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
> +		>;
> +	};
> +
> +	pinctrl_flexcan2: flexcan2grp {
> +		fsl,pins = <
> +			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x0b0b0
> +			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x0b0b0
> +		>;
> +	};
> +
> +	pinctrl_gpios: gpiosgrp {
> +		fsl,pins = <
> +			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09	0x0b0b0
> +			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x0b0b0
> +			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x0b0b0
> +			MX6UL_PAD_NAND_RE_B__GPIO4_IO00		0x0b0b0
> +			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0x0b0b0
> +			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x0b0b0
> +			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x0b0b0
> +			MX6UL_PAD_NAND_WE_B__GPIO4_IO01		0x0b0b0
> +			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x0b0b0
> +			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x0b0b0
> +			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x0b0b0
> +			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0
> +			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0b0
> +			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x0b0b0
> +			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x0b0b0
> +			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x0b0b0
> +		>;
> +	};
> +
> +	pinctrl_w1: w1grp {
> +		fsl,pins = <
> +			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x0b0b0
> +		>;
> +	};
> +
> +	pinctrl_gpio_keys: gpio_keysgrp {

gpiokeysgrp

> +		fsl,pins = <
> +			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x0b0b0
> +		>;
> +	};
> +
> +	pinctrl_i2c1: i2c1grp {
> +		fsl,pins = <
> +			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA	0x4001b8b0
> +			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL	0x4001b8b0
> +		>;
> +	};
> +
> +	pinctrl_i2c2: i2c2grp {
> +		fsl,pins = <
> +			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
> +			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
> +		>;
> +	};
> +
> +	pinctrl_lcdif: lcdifgrp {
> +		fsl,pins = <
> +			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x100b1
> +			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x100b1
> +			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x100b1
> +			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x100b1
> +			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x100b1
> +			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x100b1
> +			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x100b1
> +			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x100b1
> +			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x100b1
> +			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x100b1
> +			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x100b1
> +			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x100b1
> +			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x100b1
> +			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x100b1
> +			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x100b1
> +			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x100b1
> +			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x100b1
> +			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x100b1
> +			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x100b1
> +			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x100b1
> +			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x100b1
> +			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x100b1
> +		>;
> +	};
> +
> +	pinctrl_led: ledgrp {
> +		fsl,pins = <
> +			MX6UL_PAD_LCD_RESET__GPIO3_IO04		0x0b0b0
> +		>;
> +	};
> +
> +	pinctrl_tsc: tscgrp {
> +		fsl,pins = <
> +			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01       0xb0
> +			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02       0xb0
> +			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03       0xb0
> +			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04       0xb0
> +		>;
> +	};
> +
> +	pinctrl_uart1: uart1grp {
> +		fsl,pins = <
> +			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
> +			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
> +		>;
> +	};
> +
> +	pinctrl_uart2: uart2grp {
> +		fsl,pins = <
> +			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
> +			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
> +		>;
> +	};
> +
> +	pinctrl_usbotg1_id: usbotg1_idgrp {

usbotg1idgrp

> +		fsl,pins = <
> +			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x1b0b0
> +		>;
> +	};
> +
> +	pinctrl_usbotg1_vbus: usbotg1_vbusgrp {

usbotg1vbusgrp

> +		fsl,pins = <
> +			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x1b0b0
> +		>;
> +	};
> +
> +	pinctrl_usbotg2_vbus: usbotg2_vbusgrp {

usbotg2vbusgrp

Shawn

> +		fsl,pins = <
> +			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09	0x1b0b0
> +		>;
> +	};
> +};
> -- 
> 2.7.3
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Powered by blists - more mailing lists