[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1484011353-21480-3-git-send-email-andre.przywara@arm.com>
Date: Tue, 10 Jan 2017 01:22:32 +0000
From: Andre Przywara <andre.przywara@....com>
To: Maxime Ripard <maxime.ripard@...e-electrons.com>,
Chen-Yu Tsai <wens@...e.org>
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-sunxi@...glegroups.com, linux-kernel@...r.kernel.org
Subject: [PATCH 2/3] arm64: dts: sun50i: add UART1 pin nodes
On many boards UART1 connects to a Bluetooth chip, so add the pinctrl
nodes for the only pins providing access to that UART. That includes
those pins for hardware flow control (RTS/CTS).
Signed-off-by: Andre Przywara <andre.przywara@....com>
---
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index f46ae96..419b0b1 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -234,6 +234,16 @@
pins = "PB8", "PB9";
function = "uart0";
};
+
+ uart1_pins: uart1_pins {
+ pins = "PG6", "PG7";
+ function = "uart1";
+ };
+
+ uart1_rts_cts_pins: uart1_rts_cts_pins {
+ pins = "PG8", "PG9";
+ function = "uart1";
+ };
};
uart0: serial@...8000 {
--
2.8.2
Powered by blists - more mailing lists