linux-kernel - Re: [PATCH v5 0/6] inherit dma configuration from parent dev

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <483d2264-b45a-4142-6dc4-e96637d452fd@ti.com>
Date:   Tue, 10 Jan 2017 14:11:46 +0200
From:   Roger Quadros <rogerq@...com>
To:     Greg KH <gregkh@...uxfoundation.org>
CC:     Sriram Dash <sriram.dash@....com>, <linux-kernel@...r.kernel.org>,
        <linux-usb@...r.kernel.org>, <felipe.balbi@...ux.intel.com>,
        Mathias Nyman <mathias.nyman@...ux.intel.com>,
        <mathias.nyman@...el.com>, <suresh.gupta@....com>,
        <stern@...land.harvard.edu>, <pku.leo@...il.com>,
        Grygorii Strashko <grygorii.strashko@...com>
Subject: Re: [PATCH v5 0/6] inherit dma configuration from parent dev

On 05/01/17 19:16, Greg KH wrote:
> On Thu, Jan 05, 2017 at 05:21:09PM +0200, Roger Quadros wrote:
>> Hi,
>>
>> On 17/11/16 13:43, Sriram Dash wrote:
>>> For xhci-hcd platform device, all the DMA parameters are not
>>> configured properly, notably dma ops for dwc3 devices.
>>>
>>> The idea here is that you pass in the parent of_node along
>>> with the child device pointer, so it would behave exactly
>>> like the parent already does. The difference is that it also
>>> handles all the other attributes besides the mask.
>>>
>>> Arnd Bergmann (6):
>>>   usb: separate out sysdev pointer from usb_bus
>>>   usb: chipidea: use bus->sysdev for DMA configuration
>>>   usb: ehci: fsl: use bus->sysdev for DMA configuration
>>>   usb: xhci: use bus->sysdev for DMA configuration
>>>   usb: dwc3: use bus->sysdev for DMA configuration
>>>   usb: dwc3: Do not set dma coherent mask
>>
>> Only the dwc3 patches have been picked up for v4.10 and the rest are still missing.
>> Any plans to pick them in the rc cycle?
>>
>> DMA configuration is still broken for XHCI on v4.10 and -next.
> 
> It's always been broken, so it's not a big deal for 4.10 :)
> 
OK. But I do see the following warning on xhci probe on TI platforms that use
dwc3 IP. This is new in v4.10.

[   11.664835] ------------[ cut here ]------------
[   11.669693] WARNING: CPU: 1 PID: 534 at drivers/usb/host/xhci-plat.c:168 xhci_plat_probe+0x180/0x450 [xhci_plat_hcd]
[   11.680765] Modules linked in: xhci_plat_hcd(+) xhci_hcd usbcore evdev dwc3 snd_soc_simple_card snd_soc_tlv320aic3x snd_soc_simple_card_utils udc_core m25p80 snd_soc_davinci_mcasp usb_common spi_nor snd_soc_e
[   11.726078] CPU: 1 PID: 534 Comm: modprobe Tainted: G        W       4.10.0-rc3 #1075
[   11.734293] Hardware name: Generic DRA74X (Flattened Device Tree)
[   11.740695] [<c011013c>] (unwind_backtrace) from [<c010c300>] (show_stack+0x10/0x14)
[   11.748829] [<c010c300>] (show_stack) from [<c04a0018>] (dump_stack+0xac/0xe0)
[   11.756413] [<c04a0018>] (dump_stack) from [<c013700c>] (__warn+0xd8/0x104)
[   11.763722] [<c013700c>] (__warn) from [<c01370e4>] (warn_slowpath_null+0x20/0x28)
[   11.771675] [<c01370e4>] (warn_slowpath_null) from [<bf317280>] (xhci_plat_probe+0x180/0x450 [xhci_plat_hcd])
[   11.782110] [<bf317280>] (xhci_plat_probe [xhci_plat_hcd]) from [<c055f390>] (platform_drv_probe+0x4c/0xb0)
[   11.792338] [<c055f390>] (platform_drv_probe) from [<c055d3ec>] (driver_probe_device+0x200/0x2d4)
[   11.801655] [<c055d3ec>] (driver_probe_device) from [<c055d580>] (__driver_attach+0xc0/0xc4)
[   11.810518] [<c055d580>] (__driver_attach) from [<c055b868>] (bus_for_each_dev+0x6c/0xa0)
[   11.819095] [<c055b868>] (bus_for_each_dev) from [<c055c9cc>] (bus_add_driver+0x18c/0x214)
[   11.827767] [<c055c9cc>] (bus_add_driver) from [<c055e3b8>] (driver_register+0x78/0xf8)
[   11.836167] [<c055e3b8>] (driver_register) from [<c010188c>] (do_one_initcall+0x3c/0x174)
[   11.844751] [<c010188c>] (do_one_initcall) from [<c023c084>] (do_init_module+0x5c/0x1d0)
[   11.853247] [<c023c084>] (do_init_module) from [<c01da5a8>] (load_module+0x1d48/0x23a8)
[   11.861649] [<c01da5a8>] (load_module) from [<c01dad58>] (SyS_init_module+0x150/0x174)
[   11.869961] [<c01dad58>] (SyS_init_module) from [<c0107860>] (ret_fast_syscall+0x0/0x1c)
[   11.878494] ---[ end trace a0ca4c6c0c9a9ee9 ]---
[   11.883400] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller

cheers,
-roger