linux-kernel - [PATCH 4.9 176/206] xfs: dont BUG() on mixed direct and mapped I/O

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 10 Jan 2017 14:37:39 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Brian Foster <bfoster@...hat.com>,
        Dave Chinner <dchinner@...hat.com>,
        Dave Chinner <david@...morbit.com>,
        Christoph Hellwig <hch@....de>
Subject: [PATCH 4.9 176/206] xfs: dont BUG() on mixed direct and mapped I/O

4.9-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brian Foster <bfoster@...hat.com>

commit 04197b341f23b908193308b8d63d17ff23232598 upstream.

We've had reports of generic/095 causing XFS to BUG() in
__xfs_get_blocks() due to the existence of delalloc blocks on a
direct I/O read. generic/095 issues a mix of various types of I/O,
including direct and memory mapped I/O to a single file. This is
clearly not supported behavior and is known to lead to such
problems. E.g., the lack of exclusion between the direct I/O and
write fault paths means that a write fault can allocate delalloc
blocks in a region of a file that was previously a hole after the
direct read has attempted to flush/inval the file range, but before
it actually reads the block mapping. In turn, the direct read
discovers a delalloc extent and cannot proceed.

While the appropriate solution here is to not mix direct and memory
mapped I/O to the same regions of the same file, the current
BUG_ON() behavior is probably overkill as it can crash the entire
system.  Instead, localize the failure to the I/O in question by
returning an error for a direct I/O that cannot be handled safely
due to delalloc blocks. Be careful to allow the case of a direct
write to post-eof delalloc blocks. This can occur due to speculative
preallocation and is safe as post-eof blocks are not accompanied by
dirty pages in pagecache (conversely, preallocation within eof must
have been zeroed, and thus dirtied, before the inode size could have
been increased beyond said blocks).

Finally, provide an additional warning if a direct I/O write occurs
while the file is memory mapped. This may not catch all problematic
scenarios, but provides a hint that some known-to-be-problematic I/O
methods are in use.

Signed-off-by: Brian Foster <bfoster@...hat.com>
Reviewed-by: Dave Chinner <dchinner@...hat.com>
Signed-off-by: Dave Chinner <david@...morbit.com>
Cc: Christoph Hellwig <hch@....de>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 fs/xfs/xfs_aops.c |   22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

--- a/fs/xfs/xfs_aops.c
+++ b/fs/xfs/xfs_aops.c
@@ -1361,6 +1361,26 @@ __xfs_get_blocks(
 	if (error)
 		goto out_unlock;

+	/*
+	 * The only time we can ever safely find delalloc blocks on direct I/O
+	 * is a dio write to post-eof speculative preallocation. All other
+	 * scenarios are indicative of a problem or misuse (such as mixing
+	 * direct and mapped I/O).
+	 *
+	 * The file may be unmapped by the time we get here so we cannot
+	 * reliably fail the I/O based on mapping. Instead, fail the I/O if this
+	 * is a read or a write within eof. Otherwise, carry on but warn as a
+	 * precuation if the file happens to be mapped.
+	 */
+	if (direct && imap.br_startblock == DELAYSTARTBLOCK) {
+		if (!create || offset < i_size_read(VFS_I(ip))) {
+			WARN_ON_ONCE(1);
+			error = -EIO;
+			goto out_unlock;
+		}
+		WARN_ON_ONCE(mapping_mapped(VFS_I(ip)->i_mapping));
+	}
+
 	/* for DAX, we convert unwritten extents directly */
 	if (create &&
 	    (!nimaps ||
@@ -1450,8 +1470,6 @@ __xfs_get_blocks(
 	     (new || ISUNWRITTEN(&imap))))
 		set_buffer_new(bh_result);

-	BUG_ON(direct && imap.br_startblock == DELAYSTARTBLOCK);
-
 	return 0;

 out_unlock: