[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <5875EF69.1070803@samsung.com>
Date: Wed, 11 Jan 2017 17:40:09 +0900
From: Inki Dae <inki.dae@...sung.com>
To: Andrzej Hajda <a.hajda@...sung.com>,
Hoegeun Kwon <hoegeun.kwon@...sung.com>, krzk@...nel.org,
robh@...nel.org, thierry.reding@...il.com, airlied@...ux.ie,
kgene@...nel.org
Cc: dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-samsung-soc@...r.kernel.org,
cw00.choi@...sung.com, jh80.chung@...sung.com,
andi.shyti@...sung.com, Hyungwon Hwang <human.hwang@...sung.com>
Subject: Re: [PATCH v8 3/3] arm64: dts: exynos: Add support for S6E3HA2 panel
device on TM2 board
2017년 01월 11일 16:46에 Andrzej Hajda 이(가) 쓴 글:
> On 11.01.2017 07:33, Hoegeun Kwon wrote:
>> From: Hyungwon Hwang <human.hwang@...sung.com>
>>
>> This patch add the panel device tree node for S6E3HA2 display
>> controller to TM2 dts.
>>
>> Signed-off-by: Hyungwon Hwang <human.hwang@...sung.com>
>> Signed-off-by: Andrzej Hajda <a.hajda@...sung.com>
>> Signed-off-by: Chanwoo Choi <cw00.choi@...sung.com>
>> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@...sung.com>
>> Tested-by: Chanwoo Choi <cw00.choi@...sung.com>
>> ---
>> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 12 ++++++++++++
>> 1 file changed, 12 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
>> index ddba2f8..6d362f9 100644
>> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
>> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
>> @@ -18,6 +18,18 @@
>> compatible = "samsung,tm2", "samsung,exynos5433";
>> };
>>
>> +&dsi {
>> + panel@0 {
>> + compatible = "samsung,s6e3ha2";
>> + reg = <0>;
>> + vdd3-supply = <&ldo27_reg>;
>> + vci-supply = <&ldo28_reg>;
>> + reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
>> + enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
>> + te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
> The same here (as in 1st comment) , te-gpios should be dropper - decon
> uses hw-trigger.
Reasonable to remove te-gpios property but this change would make MIPI-DSI driver probing to be failed so MIPI-DSI driver should be fixed together.
Thanks.
>
> Regards
> Andrzej
>> + };
>> +};
>> +
>> &hsi2c_9 {
>> status = "okay";
>>
>
>
>
>
Powered by blists - more mailing lists