linux-kernel - [PATCH] usb: dwc2: gadget: Fix GUSBCFG.USBTRDTIM value

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <1484233784-22088-2-git-send-email-amelie.delaunay@st.com>
Date:   Thu, 12 Jan 2017 16:09:44 +0100
From:   Amelie Delaunay <amelie.delaunay@...com>
To:     John Youn <johnyoun@...opsys.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>
CC:     <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH] usb: dwc2: gadget: Fix GUSBCFG.USBTRDTIM value

USBTrdTim must be programmed to 0x5 when phy has a UTMI+ 16-bit wide
interface or 0x9 when it has a 8-bit wide interface.
GUSBCFG reset value (Value After Reset: 0x1400) sets USBTrdTim to 0x5.
In case of 8-bit UTMI+, without clearing GUSBCFG.USBTRDTIM mask, USBTrdTim
results in 0xD (0x5 | 0x9).
That's why we need to clear GUSBCFG.USBTRDTIM mask before setting USBTrdTim
value, to ensure USBTrdTim is correctly set in case of 8-bit UTMI+.

Signed-off-by: Amelie Delaunay <amelie.delaunay@...com>
---
 drivers/usb/dwc2/gadget.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index c55db4a..86b2076 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -3169,7 +3169,7 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
 	/* keep other bits untouched (so e.g. forced modes are not lost) */
 	usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
 	usbcfg &= ~(GUSBCFG_TOUTCAL_MASK | GUSBCFG_PHYIF16 | GUSBCFG_SRPCAP |
-		GUSBCFG_HNPCAP);
+		GUSBCFG_HNPCAP | GUSBCFG_USBTRDTIM_MASK);
 
 	if (hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS &&
 	    (hsotg->params.speed == DWC2_SPEED_PARAM_FULL ||
@@ -4131,7 +4131,7 @@ static void dwc2_hsotg_init(struct dwc2_hsotg *hsotg)
 	/* keep other bits untouched (so e.g. forced modes are not lost) */
 	usbcfg = dwc2_readl(hsotg->regs + GUSBCFG);
 	usbcfg &= ~(GUSBCFG_TOUTCAL_MASK | GUSBCFG_PHYIF16 | GUSBCFG_SRPCAP |
-		GUSBCFG_HNPCAP);
+		GUSBCFG_HNPCAP | GUSBCFG_USBTRDTIM_MASK);
 
 	/* set the PLL on, remove the HNP/SRP and set the PHY */
 	trdtim = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5;
-- 
1.9.1