| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5877B088.5040007@nvidia.com>
Date: Thu, 12 Jan 2017 22:06:24 +0530
From: Laxman Dewangan <ldewangan@...dia.com>
To: Thierry Reding <thierry.reding@...il.com>,
Sebastian Reichel <sre@...nel.org>
CC: Martin Michlmayr <tbm@...ius.com>, <linux-pm@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, Chaitanya Bandi <bandik@...dia.com>
Subject: Re: [PATCH] power: reset: Add MAX77620 support
On Thursday 12 January 2017 09:45 PM, Thierry Reding wrote:
> From: Thierry Reding <treding@...dia.com>
>
> The Maxim MAX77620 PMIC has the ability to power off and restart the
> system. Add a driver that supports power off (via pm_power_off()) and
> restart (via arm_pm_restart() on 32-bit and 64-bit ARM).
>
> Based on work by Chaitanya Bandi <bandik@...dia.com>.
>
> Cc: Chaitanya Bandi <bandik@...dia.com>
> Signed-off-by: Thierry Reding <treding@...dia.com>
> ---
> drivers/power/reset/Kconfig | 6 ++
> drivers/power/reset/Makefile | 1 +
> drivers/power/reset/max77620-poweroff.c | 146 ++++++++++++++++++++++++++++++++
> 3 files changed, 153 insertions(+)
> create mode 100644 drivers/power/reset/max77620-poweroff.c
>
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index abeb77217a21..f0d0c20632f8 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -98,6 +98,12 @@ config POWER_RESET_IMX
> say N here or disable in dts to make sure pm_power_off never be
> overwrote wrongly by this driver.
>
> +config POWER_RESET_MAX77620
> + bool "Maxim MAX77620 PMIC power-off driver"
> + depends on MFD_MAX77620
> + help
> + Power off and restart support for Maxim MAX77620 PMICs.
> +
> config POWER_RESET_MSM
> bool "Qualcomm MSM power-off driver"
> depends on ARCH_QCOM
> diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
> index 11dae3b56ff9..74511d2f037a 100644
> --- a/drivers/power/reset/Makefile
> +++ b/drivers/power/reset/Makefile
> @@ -9,6 +9,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
> obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
> obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
> obj-$(CONFIG_POWER_RESET_IMX) += imx-snvs-poweroff.o
> +obj-$(CONFIG_POWER_RESET_MAX77620) += max77620-poweroff.o
> obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
> obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
> obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o
> diff --git a/drivers/power/reset/max77620-poweroff.c b/drivers/power/reset/max77620-poweroff.c
> new file mode 100644
> index 000000000000..4f2682d10925
> --- /dev/null
> +++ b/drivers/power/reset/max77620-poweroff.c
> @@ -0,0 +1,146 @@
> +/*
> + * Power off driver for Maxim MAX77620 device.
> + *
> + * Copyright (c) 2014-2016, NVIDIA CORPORATION. All rights reserved.
Should we change year here?
> + *
> + * Based on work by Chaitanya Bandi <bandik@...dia.com>.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation version 2.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
> + * whether express or implied; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + */
> +
> +#include <linux/errno.h>
> +#include <linux/mfd/max77620.h>
> +#include <linux/module.h>
> +#include <linux/notifier.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/reboot.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +
> +#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
> +#include <asm/system_misc.h>
> +#endif
> +
> +struct max77620_power {
> + struct regmap *regmap;
> + struct device *dev;
> +};
> +
> +static struct max77620_power *system_power_controller = NULL;
As this is static and so already initialized as NULL. Hence we may not
need to explicitly NULL initialization.
> +
> +static void max77620_pm_power_off(void)
> +{
> + struct max77620_power *power = system_power_controller;
> + unsigned int value;
> + int err;
> +
> + if (!power)
> + return;
> +
> + /* clear power key interrupts */
> + err = regmap_read(power->regmap, MAX77620_REG_ONOFFIRQ, &value);
> + if (err < 0)
> + dev_err(power->dev, "failed to clear power key interrupts: %d\n", err);
> +
> + /* clear RTC interrupts */
> + /*
> + err = regmap_read(power->regmap, MAX77620_REG_RTCINT, &value);
> + if (err < 0)
> + dev_err(power->dev, "failed to clear RTC interrupts: %d\n", err);
> + */
> +
> + /* clear TOP interrupts */
> + err = regmap_read(power->regmap, MAX77620_REG_IRQTOP, &value);
> + if (err < 0)
> + dev_err(power->dev, "failed to clear interrupts: %d\n", err);
> +
> + err = regmap_update_bits(power->regmap, MAX77620_REG_ONOFFCNFG2,
> + MAX77620_ONOFFCNFG2_SFT_RST_WK, 0);
> + if (err < 0)
> + dev_err(power->dev, "failed to clear SFT_RST_WK: %d\n", err);
> +
> + err = regmap_update_bits(power->regmap, MAX77620_REG_ONOFFCNFG1,
> + MAX77620_ONOFFCNFG1_SFT_RST,
> + MAX77620_ONOFFCNFG1_SFT_RST);
> + if (err < 0)
> + dev_err(power->dev, "failed to set SFT_RST: %d\n", err);
> +}
> +
> +#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
> +static void max77620_pm_restart(enum reboot_mode mode, const char *cmd)
> +{
> + struct max77620_power *power = system_power_controller;
> + int err;
> +
> + if (!power)
> + return;
> +
> + err = regmap_update_bits(power->regmap, MAX77620_REG_ONOFFCNFG2,
> + MAX77620_ONOFFCNFG2_SFT_RST_WK,
> + MAX77620_ONOFFCNFG2_SFT_RST_WK);
> + if (err < 0)
> + dev_err(power->dev, "failed to set SFT_RST_WK: %d\n", err);
> +
> + err = regmap_update_bits(power->regmap, MAX77620_REG_ONOFFCNFG1,
> + MAX77620_ONOFFCNFG1_SFT_RST,
> + MAX77620_ONOFFCNFG1_SFT_RST);
> + if (err < 0)
> + dev_err(power->dev, "failed to set SFT_RST: %d\n", err);
> +}
> +#endif
> +
> +static int max77620_poweroff_probe(struct platform_device *pdev)
> +{
> + struct max77620_chip *max77620 = dev_get_drvdata(pdev->dev.parent);
> + struct device_node *np = pdev->dev.parent->of_node;
> + struct max77620_power *power;
> + unsigned int value;
> + int err;
> +
> + if (!of_property_read_bool(np, "system-power-controller"))
> + return 0;
> +
> + power = devm_kzalloc(&pdev->dev, sizeof(*power), GFP_KERNEL);
> + if (!power)
> + return -ENOMEM;
> +
> + power->regmap = max77620->rmap;
We can use the function info->regmap = dev_get_regmap(parent, NULL); to
get the regmap. This will make this driver independent of max77620 chip
and extend same for other Maxim Chips.
> + power->dev = &pdev->dev;
> +
> + err = regmap_read(power->regmap, MAX77620_REG_NVERC, &value);
> + if (err < 0) {
> + dev_err(power->dev, "failed to read event recorder: %d\n", err);
> + return err;
> + }
> +
> + dev_dbg(&pdev->dev, "event recorder: %#x\n", value);
> +
> + system_power_controller = power;
> + pm_power_off = max77620_pm_power_off;
> +#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
> + arm_pm_restart = max77620_pm_restart;
What if we want to reset via the Tegra and not through PMIC?
> +#endif
> +
> + return 0;
> +}
> +
> +static struct platform_driver max77620_poweroff_driver = {
> + .driver = {
> + .name = "max77620-power",
> + },
> + .probe = max77620_poweroff_probe,
> +};
> +module_platform_driver(max77620_poweroff_driver);
> +
> +MODULE_DESCRIPTION("Maxim MAX77620 PMIC power off and restart driver");
> +MODULE_AUTHOR("Thierry Reding <treding@...dia.com>");
> +MODULE_ALIAS("platform:max77620-power");
> +MODULE_LICENSE("GPL v2");
Powered by blists - more mailing lists