| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1484260410-80123-1-git-send-email-christopher.lee.bostic@gmail.com>
Date: Thu, 12 Jan 2017 16:33:30 -0600
From: christopher.lee.bostic@...il.com
To: robh+dt@...nel.org, mark.rutland@....com, linux@...linux.org.uk,
gregkh@...uxfoundation.org, mturquette@...libre.com,
geert+renesas@...der.be, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, joel@....id.au,
jk@...abs.org, linux-kernel@...r.kernel.org, andrew@...id.au,
alistair@...ple.id.au, benh@...nel.crashing.org
Cc: Chris Bostic <cbostic@...ibm.com>
Subject: [PATCH v2 12/18] drivers/fsi: Set slave SMODE to init communication
From: Chris Bostic <cbostic@...ibm.com>
Set CFAM to appropriate ID so that the controlling master
can manage link memory ranges. Add slave engine register
definitions.
Signed-off-by: Chris Bostic <cbostic@...ibm.com>
Signed-off-by: Jeremy Kerr <jk@...abs.org>
---
drivers/fsi/fsi-core.c | 90 +++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 89 insertions(+), 1 deletion(-)
diff --git a/drivers/fsi/fsi-core.c b/drivers/fsi/fsi-core.c
index b2c9274..af7965f 100644
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@@ -36,6 +36,7 @@
#define FSI_SLAVE_CONF_DATA_BITS 28
#define FSI_PEEK_BASE 0x410
+#define FSI_SLAVE_BASE 0x800
static const int engine_page_size = 0x400;
@@ -55,8 +56,26 @@ static int fsi_slave_read(struct fsi_slave *slave, uint32_t addr,
static int fsi_slave_write(struct fsi_slave *slave, uint32_t addr,
const void *val, size_t size);
-/* FSI endpoint-device support */
+/*
+ * FSI slave engine control register offsets
+ */
+#define FSI_SMODE 0x0 /* R/W: Mode register */
+
+/*
+ * SMODE fields
+ */
+#define FSI_SMODE_WSC 0x80000000 /* Warm start done */
+#define FSI_SMODE_ECRC 0x20000000 /* Hw CRC check */
+#define FSI_SMODE_SID_SHIFT 24 /* ID shift */
+#define FSI_SMODE_SID_MASK 3 /* ID Mask */
+#define FSI_SMODE_ED_SHIFT 20 /* Echo delay shift */
+#define FSI_SMODE_ED_MASK 0xf /* Echo delay mask */
+#define FSI_SMODE_SD_SHIFT 16 /* Send delay shift */
+#define FSI_SMODE_SD_MASK 0xf /* Send delay mask */
+#define FSI_SMODE_LBCRR_SHIFT 8 /* Clk ratio shift */
+#define FSI_SMODE_LBCRR_MASK 0xf /* Clk ratio mask */
+/* FSI endpoint-device support */
int fsi_device_read(struct fsi_device *dev, uint32_t addr, void *val,
size_t size)
{
@@ -114,6 +133,30 @@ static struct fsi_device *fsi_create_device(struct fsi_slave *slave)
/* FSI slave support */
+/* Encode slave local bus echo delay */
+static inline uint32_t fsi_smode_echodly(int x)
+{
+ return (x & FSI_SMODE_ED_MASK) << FSI_SMODE_ED_SHIFT;
+}
+
+/* Encode slave local bus send delay */
+static inline uint32_t fsi_smode_senddly(int x)
+{
+ return (x & FSI_SMODE_SD_MASK) << FSI_SMODE_SD_SHIFT;
+}
+
+/* Encode slave local bus clock rate ratio */
+static inline uint32_t fsi_smode_lbcrr(int x)
+{
+ return (x & FSI_SMODE_LBCRR_MASK) << FSI_SMODE_LBCRR_SHIFT;
+}
+
+/* Encode slave ID */
+static inline uint32_t fsi_smode_sid(int x)
+{
+ return (x & FSI_SMODE_SID_MASK) << FSI_SMODE_SID_SHIFT;
+}
+
static int fsi_slave_read(struct fsi_slave *slave, uint32_t addr,
void *val, size_t size)
{
@@ -221,6 +264,22 @@ static void fsi_slave_release(struct device *dev)
kfree(slave);
}
+static uint32_t set_smode_defaults(struct fsi_master *master)
+{
+ return FSI_SMODE_WSC | FSI_SMODE_ECRC
+ | fsi_smode_echodly(0xf) | fsi_smode_senddly(0xf)
+ | fsi_smode_lbcrr(1);
+}
+
+static int fsi_slave_set_smode(struct fsi_master *master, int link, int id)
+{
+ uint32_t smode = set_smode_defaults(master);
+
+ smode |= fsi_smode_sid(id);
+ return master->write(master, link, 3, FSI_SLAVE_BASE + FSI_SMODE,
+ &smode, sizeof(smode));
+}
+
static int fsi_slave_init(struct fsi_master *master,
int link, uint8_t slave_id)
{
@@ -229,6 +288,21 @@ static int fsi_slave_init(struct fsi_master *master,
int rc;
uint8_t crc;
+ /*
+ * todo: Due to CFAM hardware issues related to BREAK commands we're
+ * limited to only one CFAM per link. Once issues are resolved this
+ * restriction can be removed.
+ */
+ if (slave_id > 0)
+ return 0;
+
+ rc = fsi_slave_set_smode(master, link, slave_id);
+ if (rc) {
+ dev_warn(master->dev, "can't set smode on slave:%02x:%02x %d\n",
+ link, slave_id, rc);
+ return -ENODEV;
+ }
+
rc = master->read(master, link, slave_id, 0, &chip_id, sizeof(chip_id));
if (rc) {
dev_warn(master->dev, "can't read slave %02x:%02x: %d\n",
@@ -293,6 +367,7 @@ static int fsi_master_break(struct fsi_master *master, int link)
static int fsi_master_scan(struct fsi_master *master)
{
int link, slave_id, rc;
+ uint32_t smode;
for (link = 0; link < master->n_links; link++) {
rc = fsi_master_link_enable(master, link);
@@ -308,6 +383,19 @@ static int fsi_master_scan(struct fsi_master *master)
continue;
}
+ /*
+ * Verify can read slave at default ID location. If fails
+ * there must be nothing on other end of link
+ */
+ rc = master->read(master, link, 3, FSI_SLAVE_BASE + FSI_SMODE,
+ &smode, sizeof(smode));
+ if (rc) {
+ dev_dbg(master->dev,
+ "Read link:%d smode default id failed:%d\n",
+ link, rc);
+ continue;
+ }
+
for (slave_id = 0; slave_id < FSI_N_SLAVES; slave_id++)
fsi_slave_init(master, link, slave_id);
--
1.8.2.2
Powered by blists - more mailing lists