[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGS+omA=aip76=8CcGY7gPUrHj9eLLem=8MBziz99fVDq86zPQ@mail.gmail.com>
Date: Fri, 13 Jan 2017 16:51:21 +0800
From: Daniel Kurtz <djkurtz@...omium.org>
To: Dawei Chien <dawei.chien@...iatek.com>
Cc: Rob Herring <robh+dt@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
"open list:OPEN FIRMWARE AND..." <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
linux-pm@...r.kernel.org,
"moderated list:ARM/Mediatek SoC support"
<linux-mediatek@...ts.infradead.org>,
srv_heupstream <srv_heupstream@...iatek.com>,
Sascha Hauer <kernel@...gutronix.de>,
Punit Agrawal <punit.agrawal@....com>
Subject: Re: arm64: dts: mt8173: add node for thermal calibration
On Fri, Jan 13, 2017 at 1:52 PM, Dawei Chien <dawei.chien@...iatek.com> wrote:
>
> From: "dawei.chien@...iatek.com" <dawei.chien@...iatek.com>
>
> Add this for supporting thermal calibration by e-fuse data.
>
> Signed-off-by: Dawei Chien <dawei.chien@...iatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@...omium.org>
> ---
> arch/arm64/boot/dts/mediatek/mt8173.dtsi | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> index 12e7027..adfac1e 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> @@ -401,6 +401,11 @@
> efuse: efuse@...06000 {
> compatible = "mediatek,mt8173-efuse";
> reg = <0 0x10206000 0 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + thermal_calibration: calib@528 {
> + reg = <0x528 0xc>;
> + };
> };
>
> apmixedsys: clock-controller@...09000 {
> @@ -574,6 +579,8 @@
> resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
> mediatek,auxadc = <&auxadc>;
> mediatek,apmixedsys = <&apmixedsys>;
> + nvmem-cells = <&thermal_calibration>;
> + nvmem-cell-names = "calibration-data";
> };
>
> nor_flash: spi@...0d000 {
> --
> 1.9.1
>
Powered by blists - more mailing lists