| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 14 Jan 2017 23:26:22 +0100
From: Philippe Reynes <tremyfr@...il.com>
To: mlindner@...vell.com, stephen@...workplumber.org,
davem@...emloft.net
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Philippe Reynes <tremyfr@...il.com>
Subject: [PATCH] net: marvell: sky2: use new api ethtool_{get|set}_link_ksettings
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
Signed-off-by: Philippe Reynes <tremyfr@...il.com>
---
drivers/net/ethernet/marvell/sky2.c | 68 ++++++++++++++++++++--------------
1 files changed, 40 insertions(+), 28 deletions(-)
diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index 18d6336..be003c5 100644
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -3589,47 +3589,59 @@ static u32 sky2_supported_modes(const struct sky2_hw *hw)
| SUPPORTED_1000baseT_Full;
}
-static int sky2_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+static int sky2_get_link_ksettings(struct net_device *dev,
+ struct ethtool_link_ksettings *cmd)
{
struct sky2_port *sky2 = netdev_priv(dev);
struct sky2_hw *hw = sky2->hw;
+ u32 supported, advertising;
- ecmd->transceiver = XCVR_INTERNAL;
- ecmd->supported = sky2_supported_modes(hw);
- ecmd->phy_address = PHY_ADDR_MARV;
+ supported = sky2_supported_modes(hw);
+ cmd->base.phy_address = PHY_ADDR_MARV;
if (sky2_is_copper(hw)) {
- ecmd->port = PORT_TP;
- ethtool_cmd_speed_set(ecmd, sky2->speed);
- ecmd->supported |= SUPPORTED_Autoneg | SUPPORTED_TP;
+ cmd->base.port = PORT_TP;
+ cmd->base.speed = sky2->speed;
+ supported |= SUPPORTED_Autoneg | SUPPORTED_TP;
} else {
- ethtool_cmd_speed_set(ecmd, SPEED_1000);
- ecmd->port = PORT_FIBRE;
- ecmd->supported |= SUPPORTED_Autoneg | SUPPORTED_FIBRE;
+ cmd->base.speed = SPEED_1000;
+ cmd->base.port = PORT_FIBRE;
+ supported |= SUPPORTED_Autoneg | SUPPORTED_FIBRE;
}
- ecmd->advertising = sky2->advertising;
- ecmd->autoneg = (sky2->flags & SKY2_FLAG_AUTO_SPEED)
+ advertising = sky2->advertising;
+ cmd->base.autoneg = (sky2->flags & SKY2_FLAG_AUTO_SPEED)
? AUTONEG_ENABLE : AUTONEG_DISABLE;
- ecmd->duplex = sky2->duplex;
+ cmd->base.duplex = sky2->duplex;
+
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+ supported);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+ advertising);
+
return 0;
}
-static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+static int sky2_set_link_ksettings(struct net_device *dev,
+ const struct ethtool_link_ksettings *cmd)
{
struct sky2_port *sky2 = netdev_priv(dev);
const struct sky2_hw *hw = sky2->hw;
u32 supported = sky2_supported_modes(hw);
+ u32 new_advertising;
+
+ ethtool_convert_link_mode_to_legacy_u32(&new_advertising,
+ cmd->link_modes.advertising);
- if (ecmd->autoneg == AUTONEG_ENABLE) {
- if (ecmd->advertising & ~supported)
+ if (cmd->base.autoneg == AUTONEG_ENABLE) {
+ if (new_advertising & ~supported)
return -EINVAL;
if (sky2_is_copper(hw))
- sky2->advertising = ecmd->advertising |
+ sky2->advertising = new_advertising |
ADVERTISED_TP |
ADVERTISED_Autoneg;
else
- sky2->advertising = ecmd->advertising |
+ sky2->advertising = new_advertising |
ADVERTISED_FIBRE |
ADVERTISED_Autoneg;
@@ -3638,30 +3650,30 @@ static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
sky2->speed = -1;
} else {
u32 setting;
- u32 speed = ethtool_cmd_speed(ecmd);
+ u32 speed = cmd->base.speed;
switch (speed) {
case SPEED_1000:
- if (ecmd->duplex == DUPLEX_FULL)
+ if (cmd->base.duplex == DUPLEX_FULL)
setting = SUPPORTED_1000baseT_Full;
- else if (ecmd->duplex == DUPLEX_HALF)
+ else if (cmd->base.duplex == DUPLEX_HALF)
setting = SUPPORTED_1000baseT_Half;
else
return -EINVAL;
break;
case SPEED_100:
- if (ecmd->duplex == DUPLEX_FULL)
+ if (cmd->base.duplex == DUPLEX_FULL)
setting = SUPPORTED_100baseT_Full;
- else if (ecmd->duplex == DUPLEX_HALF)
+ else if (cmd->base.duplex == DUPLEX_HALF)
setting = SUPPORTED_100baseT_Half;
else
return -EINVAL;
break;
case SPEED_10:
- if (ecmd->duplex == DUPLEX_FULL)
+ if (cmd->base.duplex == DUPLEX_FULL)
setting = SUPPORTED_10baseT_Full;
- else if (ecmd->duplex == DUPLEX_HALF)
+ else if (cmd->base.duplex == DUPLEX_HALF)
setting = SUPPORTED_10baseT_Half;
else
return -EINVAL;
@@ -3674,7 +3686,7 @@ static int sky2_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
return -EINVAL;
sky2->speed = speed;
- sky2->duplex = ecmd->duplex;
+ sky2->duplex = cmd->base.duplex;
sky2->flags &= ~SKY2_FLAG_AUTO_SPEED;
}
@@ -4405,8 +4417,6 @@ static int sky2_set_features(struct net_device *dev, netdev_features_t features)
}
static const struct ethtool_ops sky2_ethtool_ops = {
- .get_settings = sky2_get_settings,
- .set_settings = sky2_set_settings,
.get_drvinfo = sky2_get_drvinfo,
.get_wol = sky2_get_wol,
.set_wol = sky2_set_wol,
@@ -4429,6 +4439,8 @@ static int sky2_set_features(struct net_device *dev, netdev_features_t features)
.set_phys_id = sky2_set_phys_id,
.get_sset_count = sky2_get_sset_count,
.get_ethtool_stats = sky2_get_ethtool_stats,
+ .get_link_ksettings = sky2_get_link_ksettings,
+ .set_link_ksettings = sky2_set_link_ksettings,
};
#ifdef CONFIG_SKY2_DEBUG
--
1.7.4.4
Powered by blists - more mailing lists