Message-ID: <20170116074418.GA11600@x250>
Date:   Mon, 16 Jan 2017 15:44:23 +0800
From:   Shawn Guo <shawnguo@...nel.org>
To:     Baoyou Xie <baoyou.xie@...aro.org>
Cc:     jun.nie@...aro.org, p.zabel@...gutronix.de, robh+dt@...nel.org,
        mark.rutland@....com, linux-arm-kernel@...ts.infradead.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        xie.baoyou@....com.cn, chen.chaokai@....com.cn,
        wang.qiang01@....com.cn
Subject: Re: [PATCH v1 3/3] reset: zx2967: add reset controller driver for
 ZTE's zx2967 family

On Sat, Jan 14, 2017 at 03:05:30PM +0800, Baoyou Xie wrote:
> This patch adds reset controller driver for ZTE's zx2967 family.
> 
> Signed-off-by: Baoyou Xie <baoyou.xie@...aro.org>
> ---
>  drivers/reset/Kconfig        |   6 ++
>  drivers/reset/Makefile       |   1 +
>  drivers/reset/reset-zx2967.c | 136 +++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 143 insertions(+)
>  create mode 100644 drivers/reset/reset-zx2967.c
> 
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 172dc96..972d077 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -92,6 +92,12 @@ config RESET_ZYNQ
>  	help
>  	  This enables the reset controller driver for Xilinx Zynq SoCs.
>  
> +config RESET_ZX2967
> +	bool "ZX2967 Reset Driver"
> +	depends on ARCH_ZX || COMPILE_TEST
> +	help
> +	  This enables the reset controller driver for ZTE zx2967 family.
> +

The config options seem to be sorted alphabetically, so RESET_ZX2967
should be put before RESET_ZYNQ.

>  source "drivers/reset/sti/Kconfig"
>  source "drivers/reset/hisilicon/Kconfig"
>  source "drivers/reset/tegra/Kconfig"
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index 13b346e..807b77b 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -14,3 +14,4 @@ obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
>  obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
>  obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
>  obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
> +obj-$(CONFIG_RESET_ZX2967) += reset-zx2967.o

Ditto

> diff --git a/drivers/reset/reset-zx2967.c b/drivers/reset/reset-zx2967.c
> new file mode 100644
> index 0000000..63f9c41
> --- /dev/null
> +++ b/drivers/reset/reset-zx2967.c
> @@ -0,0 +1,136 @@
> +/*
> + * ZTE's zx2967 family thermal sensor driver
> + *
> + * Copyright (C) 2017 ZTE Ltd.
> + *
> + * Author: Baoyou Xie <baoyou.xie@...aro.org>
> + *
> + * License terms: GNU General Public License (GPL) version 2
> + */
> +
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +
> +struct zx2967_reset {
> +	void __iomem			*reg_base;
> +	spinlock_t			lock;
> +	struct reset_controller_dev	rcdev;
> +};
> +
> +static int zx2967_reset_assert(struct reset_controller_dev *rcdev,
> +			   unsigned long id)
> +{
> +	struct zx2967_reset *reset = NULL;
> +	int bank = id / 32;
> +	int offset = id % 32;
> +	unsigned int reg;
> +	unsigned long flags;
> +
> +	reset = container_of(rcdev, struct zx2967_reset, rcdev);
> +
> +	spin_lock_irqsave(&reset->lock, flags);
> +
> +	reg = readl(reset->reg_base + (bank * 4));
> +	writel(reg & ~BIT(offset), reset->reg_base + (bank * 4));
> +	reg = readl(reset->reg_base + (bank * 4));
> +
> +	spin_unlock_irqrestore(&reset->lock, flags);
> +
> +	return 0;
> +}
> +
> +static int zx2967_reset_deassert(struct reset_controller_dev *rcdev,
> +			     unsigned long id)
> +{
> +	struct zx2967_reset *reset = NULL;
> +	int bank = id / 32;
> +	int offset = id % 32;
> +	unsigned int reg;
> +	unsigned long flags;
> +
> +	reset = container_of(rcdev, struct zx2967_reset, rcdev);
> +
> +	spin_lock_irqsave(&reset->lock, flags);
> +
> +	reg = readl(reset->reg_base + (bank * 4));
> +	writel(reg | BIT(offset), reset->reg_base + (bank * 4));
> +	reg = readl(reset->reg_base + (bank * 4));
> +
> +	spin_unlock_irqrestore(&reset->lock, flags);
> +
> +	return 0;
> +}
> +
> +static struct reset_control_ops zx2967_reset_ops = {
> +	.assert		= zx2967_reset_assert,
> +	.deassert	= zx2967_reset_deassert,
> +};
> +
> +static int zx2967_reset_probe(struct platform_device *pdev)
> +{
> +	struct zx2967_reset *reset;
> +	struct resource *res;
> +
> +	reset = devm_kzalloc(&pdev->dev, sizeof(*reset), GFP_KERNEL);
> +	if (!reset)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	reset->reg_base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(reset->reg_base))
> +		return PTR_ERR(reset->reg_base);
> +
> +	spin_lock_init(&reset->lock);
> +
> +	reset->rcdev.owner = THIS_MODULE;
> +	reset->rcdev.nr_resets = resource_size(res) * 8;
> +	reset->rcdev.ops = &zx2967_reset_ops;
> +	reset->rcdev.of_node = pdev->dev.of_node;
> +
> +	dev_info(&pdev->dev, "reset controller cnt:%d",
> +		  reset->rcdev.nr_resets);
> +
> +	return reset_controller_register(&reset->rcdev);

Use devm_reset_controller_register(), then we can save the call to
reset_controller_unregister().

Shawn

> +}
> +
> +static int zx2967_reset_remove(struct platform_device *pdev)
> +{
> +	struct zx2967_reset *reset = platform_get_drvdata(pdev);
> +
> +	reset_controller_unregister(&reset->rcdev);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id zx2967_reset_dt_ids[] = {
> +	 { .compatible = "zte,zx296718-reset", },
> +	 {},
> +};
> +MODULE_DEVICE_TABLE(of, zx2967_reset_dt_ids);
> +
> +static struct platform_driver zx2967_reset_driver = {
> +	.probe	= zx2967_reset_probe,
> +	.remove	= zx2967_reset_remove,
> +	.driver = {
> +		.name		= "zx2967-reset",
> +		.of_match_table	= zx2967_reset_dt_ids,
> +	},
> +};
> +
> +static int __init zx2967_reset_init(void)
> +{
> +	return platform_driver_register(&zx2967_reset_driver);
> +}
> +arch_initcall(zx2967_reset_init);
> +
> +static void __exit zx2967_reset_exit(void)
> +{
> +	platform_driver_unregister(&zx2967_reset_driver);
> +}
> +module_exit(zx2967_reset_exit);
> +
> +MODULE_AUTHOR("Baoyou Xie <baoyou.xie@...aro.org>");
> +MODULE_DESCRIPTION("ZTE zx2967 Reset Controller Driver");
> +MODULE_LICENSE("GPL");
> -- 
> 2.7.4
> 

Powered by blists - more mailing lists