[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <102ea884b296dae38ab28369ce14aa7a7998dc80.1484585798.git-series.maxime.ripard@free-electrons.com>
Date: Mon, 16 Jan 2017 17:56:57 +0100
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Chen-Yu Tsai <wens@...e.org>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Ulf Hansson <ulf.hansson@...aro.org>
Cc: Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-mmc@...r.kernel.org, Andre Przywara <andre.przywara@....com>
Subject: [PATCH v3 7/13] mmc: sunxi: Add more debug messages
Add a bit more debug messages that can be helpful when debugging the clock
setup.
Signed-off-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
---
drivers/mmc/host/sunxi-mmc.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index f0f6922bca8a..40ed287ceb1c 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -661,6 +661,9 @@ static int sunxi_mmc_oclk_onoff(struct sunxi_mmc_host *host, u32 oclk_en)
unsigned long expire = jiffies + msecs_to_jiffies(750);
u32 rval;
+ dev_dbg(mmc_dev(host->mmc), "%sabling the clock\n",
+ oclk_en ? "en" : "dis");
+
rval = mmc_readl(host, REG_CLKCR);
rval &= ~(SDXC_CARD_CLOCK_ON | SDXC_LOW_POWER_ON | SDXC_MASK_DATA0);
@@ -737,6 +740,7 @@ static int sunxi_mmc_clk_set_phase(struct sunxi_mmc_host *host,
index = SDXC_CLK_50M_DDR;
}
} else {
+ dev_dbg(mmc_dev(host->mmc), "Invalid clock... returning\n");
return -EINVAL;
}
@@ -753,6 +757,9 @@ static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host,
u32 rval, clock = ios->clock;
int ret;
+ dev_dbg(mmc_dev(host->mmc), "setting clk to %u (requested %u)\n",
+ clock, ios->clock);
+
ret = sunxi_mmc_oclk_onoff(host, 0);
if (ret)
return ret;
@@ -771,8 +778,7 @@ static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host,
clock, rate);
return rate;
}
- dev_dbg(mmc_dev(host->mmc), "setting clk to %d, rounded %ld\n",
- clock, rate);
+ dev_dbg(mmc_dev(host->mmc), "Rounded clk to %ld\n", rate);
/* setting clock rate */
ret = clk_set_rate(host->clk_mmc, rate);
--
git-series 0.8.11
Powered by blists - more mailing lists