lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1484638327-9686-1-git-send-email-william.wu@rock-chips.com>
Date:   Tue, 17 Jan 2017 15:32:07 +0800
From:   William Wu <william.wu@...k-chips.com>
To:     gregkh@...uxfoundation.org
Cc:     heiko@...ech.de, linux-kernel@...r.kernel.org,
        linux-usb@...r.kernel.org, linux-rockchip@...ts.infradead.org,
        frank.wang@...k-chips.com, huangtao@...k-chips.com,
        dianders@...gle.com, groeck@...gle.com, william.wu@...k-chips.com,
        rogerq@...com, stern@...land.harvard.edu, stable@...r.kernel.org
Subject: [PATCH v2] usb: host: xhci: plat: check hcc_params after add hcd

From: William wu <william.wu@...k-chips.com>

The commit 4ac53087d6d4 ("usb: xhci: plat: Create both
HCDs before adding them") move add hcd to the end of
probe, this cause hcc_params uninitiated, because xHCI
driver sets hcc_params in xhci_gen_setup() called from
usb_add_hcd().

This patch checks the Maximum Primary Stream Array Size
in the hcc_params register after add primary hcd.

Signed-off-by: William wu <william.wu@...k-chips.com>
---
 drivers/usb/host/xhci-plat.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index ddfab30..f96caeb 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -232,9 +232,6 @@ static int xhci_plat_probe(struct platform_device *pdev)
 	if (device_property_read_bool(&pdev->dev, "usb3-lpm-capable"))
 		xhci->quirks |= XHCI_LPM_SUPPORT;
 
-	if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
-		xhci->shared_hcd->can_do_streams = 1;
-
 	hcd->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
 	if (IS_ERR(hcd->usb_phy)) {
 		ret = PTR_ERR(hcd->usb_phy);
@@ -251,6 +248,9 @@ static int xhci_plat_probe(struct platform_device *pdev)
 	if (ret)
 		goto disable_usb_phy;
 
+	if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
+		xhci->shared_hcd->can_do_streams = 1;
+
 	ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
 	if (ret)
 		goto dealloc_usb2_hcd;
-- 
2.7.4


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ