linux-kernel - [PATCH v2 14/14] ARM: dts: da850-lcdk: enable the SATA node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1484655976-25382-15-git-send-email-bgolaszewski@baylibre.com>
Date:   Tue, 17 Jan 2017 13:26:16 +0100
From:   Bartosz Golaszewski <bgolaszewski@...libre.com>
To:     Kevin Hilman <khilman@...nel.org>, Sekhar Nori <nsekhar@...com>,
        Patrick Titiano <ptitiano@...libre.com>,
        Michael Turquette <mturquette@...libre.com>,
        Tejun Heo <tj@...nel.org>, Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Russell King <linux@...linux.org.uk>,
        David Lechner <david@...hnology.com>
Cc:     linux-ide@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        Bartosz Golaszewski <bgolaszewski@...libre.com>
Subject: [PATCH v2 14/14] ARM: dts: da850-lcdk: enable the SATA node

Enable the SATA node for da850-lcdk. We omit the pinctrl property on
purpose - the muxed SATA pins are not hooked up to anything
SATA-related on the lcdk.

The REFCLKN/P rate on the board is 100MHz, so we need a multiplier of
15 for 1.5GHz PLL rate.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@...libre.com>
---
 arch/arm/boot/dts/da850-lcdk.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index afcb482..fbeee3c 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -105,6 +105,10 @@
 	status = "okay";
 };
 
+&sata {
+	status = "okay";
+};
+
 &mdio {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mdio_pins>;
-- 
2.9.3