| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20170117231421.16310-4-paul@crapouillou.net>
Date: Wed, 18 Jan 2017 00:14:11 +0100
From: Paul Cercueil <paul@...pouillou.net>
To: Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Ralf Baechle <ralf@...ux-mips.org>,
Ulf Hansson <ulf.hansson@...aro.org>,
Boris Brezillon <boris.brezillon@...e-electrons.com>,
Thierry Reding <thierry.reding@...il.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Maarten ter Huurne <maarten@...ewalker.org>,
Lars-Peter Clausen <lars@...afoo.de>,
Paul Burton <paul.burton@...tec.com>
Cc: linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-mips@...ux-mips.org,
linux-mmc@...r.kernel.org, linux-mtd@...ts.infradead.org,
linux-pwm@...r.kernel.org, linux-fbdev@...r.kernel.org,
james.hogan@...tec.com, Paul Cercueil <paul@...pouillou.net>
Subject: [PATCH 03/13] pinctrl-jz4780: add a pinctrl driver for the Ingenic jz4780 SoC
This driver reuses the core of the driver already present in
pinctrl-ingenic.c, and just supplies callbacks to perform the low-level
operations.
Signed-off-by: Paul Cercueil <paul@...pouillou.net>
---
drivers/pinctrl/ingenic/Kconfig | 6 ++
drivers/pinctrl/ingenic/Makefile | 1 +
drivers/pinctrl/ingenic/pinctrl-jz4780.c | 179 +++++++++++++++++++++++++++++++
3 files changed, 186 insertions(+)
create mode 100644 drivers/pinctrl/ingenic/pinctrl-jz4780.c
diff --git a/drivers/pinctrl/ingenic/Kconfig b/drivers/pinctrl/ingenic/Kconfig
index 9923ce127183..15b6514c1948 100644
--- a/drivers/pinctrl/ingenic/Kconfig
+++ b/drivers/pinctrl/ingenic/Kconfig
@@ -12,3 +12,9 @@ config PINCTRL_JZ4740
default y
depends on MACH_JZ4740 || COMPILE_TEST
select PINCTRL_INGENIC
+
+config PINCTRL_JZ4780
+ bool "Pinctrl driver for the Ingenic JZ4780 SoC"
+ default y
+ depends on MACH_JZ4780 || COMPILE_TEST
+ select PINCTRL_INGENIC
diff --git a/drivers/pinctrl/ingenic/Makefile b/drivers/pinctrl/ingenic/Makefile
index 8b2c8b789dc9..ad691f053207 100644
--- a/drivers/pinctrl/ingenic/Makefile
+++ b/drivers/pinctrl/ingenic/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_PINCTRL_INGENIC) += pinctrl-ingenic.o
obj-$(CONFIG_PINCTRL_JZ4740) += pinctrl-jz4740.o
+obj-$(CONFIG_PINCTRL_JZ4780) += pinctrl-jz4780.o
diff --git a/drivers/pinctrl/ingenic/pinctrl-jz4780.c b/drivers/pinctrl/ingenic/pinctrl-jz4780.c
new file mode 100644
index 000000000000..a191cd1711e7
--- /dev/null
+++ b/drivers/pinctrl/ingenic/pinctrl-jz4780.c
@@ -0,0 +1,179 @@
+/*
+ * Ingenic jz4780 pinctrl driver
+ *
+ * Copyright (c) 2013 Imagination Technologies
+ * Copyright (c) 2017 Paul Cercueil <paul@...pouillou.net>
+ *
+ * Authors: Paul Burton <paul.burton@...tec.com>,
+ * Paul Cercueil <paul@...pouillou.net>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include "pinctrl-ingenic.h"
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+/* GPIO port register offsets */
+#define GPIO_PIN 0x00
+#define GPIO_INT 0x10
+#define GPIO_INTS 0x14
+#define GPIO_INTC 0x18
+#define GPIO_MSK 0x20
+#define GPIO_MSKS 0x24
+#define GPIO_MSKC 0x28
+#define GPIO_PAT1 0x30
+#define GPIO_PAT1S 0x34
+#define GPIO_PAT1C 0x38
+#define GPIO_PAT0 0x40
+#define GPIO_PAT0S 0x44
+#define GPIO_PAT0C 0x48
+#define GPIO_FLG 0x50
+#define GPIO_FLGC 0x58
+#define GPIO_PEN 0x70
+#define GPIO_PENS 0x74
+#define GPIO_PENC 0x78
+
+static void jz4780_set_gpio(void __iomem *base,
+ unsigned int offset, bool output)
+{
+ writel(1 << offset, base + GPIO_INTC);
+ writel(1 << offset, base + GPIO_MSKS);
+
+ if (output)
+ writel(1 << offset, base + GPIO_PAT1C);
+ else
+ writel(1 << offset, base + GPIO_PAT1S);
+}
+
+static int jz4780_get_bias(void __iomem *base, unsigned int offset)
+{
+ return !((readl(base + GPIO_PEN) >> offset) & 0x1);
+}
+
+static void jz4780_set_bias(void __iomem *base,
+ unsigned int offset, bool enable)
+{
+ if (enable)
+ writel(1 << offset, base + GPIO_PENC);
+ else
+ writel(1 << offset, base + GPIO_PENS);
+}
+
+static void jz4780_gpio_set_value(void __iomem *base,
+ unsigned int offset, int value)
+{
+ if (value)
+ writel(1 << offset, base + GPIO_PAT0S);
+ else
+ writel(1 << offset, base + GPIO_PAT0C);
+}
+
+static int jz4780_gpio_get_value(void __iomem *base, unsigned int offset)
+{
+ return (readl(base + GPIO_PIN) >> offset) & 0x1;
+}
+
+static u32 jz4780_irq_read(void __iomem *base)
+{
+ return readl(base + GPIO_FLG);
+}
+
+static void jz4780_irq_mask(void __iomem *base, unsigned int offset, bool mask)
+{
+ if (mask)
+ writel(1 << offset, base + GPIO_MSKS);
+ else
+ writel(1 << offset, base + GPIO_MSKC);
+}
+
+static void jz4780_irq_ack(void __iomem *base, unsigned int offset)
+{
+ writel(1 << offset, base + GPIO_FLGC);
+}
+
+static void jz4780_irq_set_type(void __iomem *base,
+ unsigned int offset, unsigned int type)
+{
+ enum {
+ PAT_EDGE_RISING = 0x3,
+ PAT_EDGE_FALLING = 0x2,
+ PAT_LEVEL_HIGH = 0x1,
+ PAT_LEVEL_LOW = 0x0,
+ } pat;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ pat = PAT_EDGE_RISING;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ pat = PAT_EDGE_FALLING;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ pat = PAT_LEVEL_HIGH;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ default:
+ pat = PAT_LEVEL_LOW;
+ break;
+ };
+
+ writel(1 << offset, base + ((pat & 0x2) ? GPIO_PAT1S : GPIO_PAT1C));
+ writel(1 << offset, base + ((pat & 0x1) ? GPIO_PAT0S : GPIO_PAT0C));
+ writel(1 << offset, base + GPIO_INTS);
+}
+
+static void jz4780_set_function(void __iomem *base,
+ unsigned int offset, unsigned int func)
+{
+ writel(1 << offset, base + GPIO_INTC);
+ writel(1 << offset, base + GPIO_MSKC);
+ writel(1 << offset, base + ((func & 0x2) ? GPIO_PAT1S : GPIO_PAT1C));
+ writel(1 << offset, base + ((func & 0x1) ? GPIO_PAT0S : GPIO_PAT0C));
+}
+
+static const struct ingenic_pinctrl_ops jz4780_pinctrl_ops = {
+ .nb_functions = 4,
+ .set_function = jz4780_set_function,
+ .set_gpio = jz4780_set_gpio,
+ .set_bias = jz4780_set_bias,
+ .get_bias = jz4780_get_bias,
+ .gpio_set_value = jz4780_gpio_set_value,
+ .gpio_get_value = jz4780_gpio_get_value,
+ .irq_read = jz4780_irq_read,
+ .irq_mask = jz4780_irq_mask,
+ .irq_ack = jz4780_irq_ack,
+ .irq_set_type = jz4780_irq_set_type,
+};
+
+static int jz4780_pinctrl_probe(struct platform_device *pdev)
+{
+ return ingenic_pinctrl_probe(pdev, &jz4780_pinctrl_ops);
+}
+
+static const struct of_device_id jz4780_pinctrl_dt_match[] = {
+ { .compatible = "ingenic,jz4780-pinctrl", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, jz4780_pinctrl_dt_match);
+
+
+static struct platform_driver jz4780_pinctrl_driver = {
+ .driver = {
+ .name = "jz4780-pinctrl",
+ .of_match_table = of_match_ptr(jz4780_pinctrl_dt_match),
+ .suppress_bind_attrs = true,
+ },
+ .probe = jz4780_pinctrl_probe,
+};
+
+static int __init jz4780_pinctrl_drv_register(void)
+{
+ return platform_driver_register(&jz4780_pinctrl_driver);
+}
+postcore_initcall(jz4780_pinctrl_drv_register);
--
2.11.0
Powered by blists - more mailing lists