linux-kernel - Re: [PATCH 0/6 v4] adv7511 EDID probing improvements

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <3859476.cEhDXg5Hko@avalon>
Date:   Thu, 19 Jan 2017 01:04:02 +0200
From:   Laurent Pinchart <laurent.pinchart@...asonboard.com>
To:     John Stultz <john.stultz@...aro.org>
Cc:     lkml <linux-kernel@...r.kernel.org>,
        David Airlie <airlied@...ux.ie>,
        Archit Taneja <architt@...eaurora.org>,
        Wolfram Sang <wsa+renesas@...g-engineering.com>,
        Lars-Peter Clausen <lars@...afoo.de>,
        dri-devel@...ts.freedesktop.org
Subject: Re: [PATCH 0/6 v4] adv7511 EDID probing improvements

Hi John,

Thank you for the patches.

On Monday 16 Jan 2017 16:52:46 John Stultz wrote:
> Wanted to re-send out v4  of this patch set, integrating some
> changes suggested by Laurent, for consideration for merging for
> v4.11
> 
> The first three patches are fixups that are hopefully straight
> forward, integrating feedback I got from Laurant, with minimal
> change from the previous versions.
> 
> The last three patches try to clean up and rework the EDID
> probing code, to avoid issues seen on HiKey. I've reworked these
> more significantly since v3 to address feedback from Laurent.
> 
> Thoughts and feedback would be appreciated!

For the whole series,

Tested-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>

> New in v4:
> * Tweaked connector.status assignment to avoid race, as
>   suggested by Laurent
> * Reworked the __adv7511_power_on helpers to avoid calling
>   regcache_sync in the EDID probe path
> * Added new patch to set EDID_I2C_ADDR register before doing
>   EDID read.
> 
> Cc: David Airlie <airlied@...ux.ie>
> Cc: Archit Taneja <architt@...eaurora.org>
> Cc: Wolfram Sang <wsa+renesas@...g-engineering.com>
> Cc: Lars-Peter Clausen <lars@...afoo.de>
> Cc: Laurent Pinchart <laurent.pinchart@...asonboard.com>
> Cc: dri-devel@...ts.freedesktop.org
> 
> Archit Taneja (1):
>   drm/bridge: adv7511: Enable HPD interrupts to support hotplug and
>     improve monitor detection
> 
> John Stultz (5):
>   drm/bridge: adv7511: Use work_struct to defer hotplug handing to out
>     of irq context
>   drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event()
>   drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be
>     reused internally
>   drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID
>   drm/bridge: adv7511: Re-write the i2c address before EDID probing
> 
>  drivers/gpu/drm/bridge/adv7511/adv7511.h     |  2 +
>  drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 67
> ++++++++++++++++++++-------- 2 files changed, 51 insertions(+), 18
> deletions(-)

-- 
Regards,

Laurent Pinchart