| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1484718665-11584-6-git-send-email-chunfeng.yun@mediatek.com>
Date: Wed, 18 Jan 2017 13:51:05 +0800
From: Chunfeng Yun <chunfeng.yun@...iatek.com>
To: Kishon Vijay Abraham I <kishon@...com>
CC: Matthias Brugger <matthias.bgg@...il.com>,
Felipe Balbi <felipe.balbi@...ux.intel.com>,
Chunfeng Yun <chunfeng.yun@...iatek.com>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-usb@...r.kernel.org>, <linux-mediatek@...ts.infradead.org>
Subject: [PATCH 6/6] dt-bindings: phy-mt65xx-usb: add support for mt2712 platform
add a new compatible string for "mt2712", and a new reference clock
for SuperSpeed analog phy;
Signed-off-by: Chunfeng Yun <chunfeng.yun@...iatek.com>
---
.../devicetree/bindings/phy/phy-mt65xx-usb.txt | 81 +++++++++++++++++---
1 file changed, 70 insertions(+), 11 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt b/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt
index 33a2b1e..8f91136 100644
--- a/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt
+++ b/Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt
@@ -6,19 +6,25 @@ This binding describes a usb3.0 phy for mt65xx platforms of Medaitek SoC.
Required properties (controller (parent) node):
- compatible : should be one of
"mediatek,mt2701-u3phy"
+ "mediatek,mt2712-u3phy"
"mediatek,mt8173-u3phy"
- - reg : offset and length of register for phy, exclude port's
- register.
- clocks : a list of phandle + clock-specifier pairs, one for each
entry in clock-names
- clock-names : must contain
- "u3phya_ref": for reference clock of usb3.0 analog phy.
+ "u2ref_clk": 48M reference clock of HighSpeed analog phy.
+ "u3ref_clk": 26M reference clock of SuperSpeed analog phy,
+ sometimes is 24M, 25M or 27M, depended on platform.
Required nodes : a sub-node is required for each port the controller
provides. Address range information including the usual
'reg' property is used inside these nodes to describe
the controller's topology.
+Optional properties (controller (parent) node):
+ - reg : offset and length of register shared by multiple ports,
+ exclude port's private register. It is needed on mt2701
+ and mt8173, but not on mt2712.
+
Required properties (port (child) node):
- reg : address and length of the register set for the port.
- #phy-cells : should be 1 (See second example)
@@ -31,21 +37,27 @@ Example:
u3phy: usb-phy@...90000 {
compatible = "mediatek,mt8173-u3phy";
reg = <0 0x11290000 0 0x800>;
- clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
- clock-names = "u3phya_ref";
+ clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>, <&clk26m>;
+ clock-names = "u2ref_clk", "u3ref_clk";
#address-cells = <2>;
#size-cells = <2>;
ranges;
status = "okay";
- phy_port0: port@...90800 {
- reg = <0 0x11290800 0 0x800>;
+ u2port0: port@...90800 {
+ reg = <0 0x11290800 0 0x100>;
+ #phy-cells = <1>;
+ status = "okay";
+ };
+
+ u3port0: port@...90900 {
+ reg = <0 0x11290800 0 0x700>;
#phy-cells = <1>;
status = "okay";
};
- phy_port1: port@...91000 {
- reg = <0 0x11291000 0 0x800>;
+ u2port1: port@...91000 {
+ reg = <0 0x11291000 0 0x100>;
#phy-cells = <1>;
status = "okay";
};
@@ -64,7 +76,54 @@ Example:
usb30: usb@...70000 {
...
- phys = <&phy_port0 PHY_TYPE_USB3>;
- phy-names = "usb3-0";
+ phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
+ phy-names = "usb2-0", "usb3-0";
...
};
+
+
+Layout differences of banks between mt8173/mt2701 and mt2712
+-------------------------------------------------------------
+mt8173 and mt2701:
+port offset bank
+shared 0x0000 SPLLC
+ 0x0100 FMREG
+u2 port0 0x0800 U2PHY_COM
+u3 port0 0x0900 U3PHYD
+ 0x0a00 U3PHYD_BANK2
+ 0x0b00 U3PHYA
+ 0x0c00 U3PHYA_DA
+u2 port1 0x1000 U2PHY_COM
+u3 port1 0x1100 U3PHYD
+ 0x1200 U3PHYD_BANK2
+ 0x1300 U3PHYA
+ 0x1400 U3PHYA_DA
+u2 port2 0x1800 U2PHY_COM
+ ...
+
+mt2712:
+port offset bank
+u2 port0 0x0000 MISC
+ 0x0100 FMREG
+ 0x0300 U2PHY_COM
+u3 port0 0x0700 SPLLC
+ 0x0800 CHIP
+ 0x0900 U3PHYD
+ 0x0a00 U3PHYD_BANK2
+ 0x0b00 U3PHYA
+ 0x0c00 U3PHYA_DA
+u2 port1 0x1000 MISC
+ 0x1100 FMREG
+ 0x1300 U2PHY_COM
+u3 port1 0x1700 SPLLC
+ 0x1800 CHIP
+ 0x1900 U3PHYD
+ 0x1a00 U3PHYD_BANK2
+ 0x1b00 U3PHYA
+ 0x1c00 U3PHYA_DA
+u2 port2 0x2000 MISC
+ ...
+
+ SPLLC shared by u3 ports and FMREG shared by u2 ports on
+mt8173/mt2701 are put back into each port; a new bank MISC for
+u2 ports and CHIP for u3 ports are added on mt2712.
--
1.7.9.5
Powered by blists - more mailing lists