[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1484755035-25927-12-git-send-email-peda@axentia.se>
Date: Wed, 18 Jan 2017 16:57:14 +0100
From: Peter Rosin <peda@...ntia.se>
To: <linux-kernel@...r.kernel.org>
CC: Peter Rosin <peda@...ntia.se>, Wolfram Sang <wsa@...-dreams.de>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Jonathan Cameron <jic23@...nel.org>,
Hartmut Knaack <knaack.h@....de>,
Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald-Stadler <pmeerw@...erw.net>,
Jonathan Corbet <corbet@....net>,
Andrew Morton <akpm@...ux-foundation.org>,
<linux-i2c@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-iio@...r.kernel.org>, <linux-doc@...r.kernel.org>
Subject: [PATCH v8 11/12] dt-bindings: simplified bindings for single-user gpio mux
Allow bindings for a GPIO controlled mux to be specified in the
mux consumer node.
Acked-by: Jonathan Cameron <jic23@...nel.org>
Signed-off-by: Peter Rosin <peda@...ntia.se>
---
.../devicetree/bindings/mux/mux-controller.txt | 26 ++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/Documentation/devicetree/bindings/mux/mux-controller.txt b/Documentation/devicetree/bindings/mux/mux-controller.txt
index 42b2177e5ae1..4e89df8b2392 100644
--- a/Documentation/devicetree/bindings/mux/mux-controller.txt
+++ b/Documentation/devicetree/bindings/mux/mux-controller.txt
@@ -125,3 +125,29 @@ An example mux controller might look like this:
reg = <0x50>;
#mux-control-cells = <1>;
};
+
+
+Combinded controller and consumer of a GPIO mux
+-----------------------------------------------
+
+For the common case of a single consumer of a GPIO controlled mux, there is
+a simplified binding which will instantiate an implicit mux controller. Just
+specify a mux-gpios property with the same interpretation as in mux-gpio.txt.
+Note that other properties described in mux-gpio.txt are not available in
+this simplified form and that the mux controller is unnamed. If you need
+more than one mux controller, a shared mux controller or if you need a
+specific idle-state, use the more flexible binding with the mux controller
+in its own node.
+
+Example:
+
+ adc-mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 0>;
+ io-channel-names = "parent";
+
+ mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+ <&pioA 1 GPIO_ACTIVE_HIGH>;
+
+ channels = "sync-1", "in", "out", "sync-2";
+ };
--
2.1.4
Powered by blists - more mailing lists