[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e7394475-e251-37d1-8910-71ca1661ffed@codeaurora.org>
Date: Thu, 19 Jan 2017 10:52:41 +0530
From: Archit Taneja <architt@...eaurora.org>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>,
John Stultz <john.stultz@...aro.org>
Cc: lkml <linux-kernel@...r.kernel.org>,
David Airlie <airlied@...ux.ie>,
Wolfram Sang <wsa+renesas@...g-engineering.com>,
Lars-Peter Clausen <lars@...afoo.de>,
dri-devel@...ts.freedesktop.org
Subject: Re: [PATCH 0/6 v4] adv7511 EDID probing improvements
On 01/19/2017 04:34 AM, Laurent Pinchart wrote:
> Hi John,
>
> Thank you for the patches.
>
> On Monday 16 Jan 2017 16:52:46 John Stultz wrote:
>> Wanted to re-send out v4 of this patch set, integrating some
>> changes suggested by Laurent, for consideration for merging for
>> v4.11
>>
>> The first three patches are fixups that are hopefully straight
>> forward, integrating feedback I got from Laurant, with minimal
>> change from the previous versions.
>>
>> The last three patches try to clean up and rework the EDID
>> probing code, to avoid issues seen on HiKey. I've reworked these
>> more significantly since v3 to address feedback from Laurent.
>>
>> Thoughts and feedback would be appreciated!
>
> For the whole series,
>
> Tested-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Queued to drm-misc-next. Updated the commit messages for patches 5
and 6 as suggested by Laurent.
Thanks,
Archit
>
>> New in v4:
>> * Tweaked connector.status assignment to avoid race, as
>> suggested by Laurent
>> * Reworked the __adv7511_power_on helpers to avoid calling
>> regcache_sync in the EDID probe path
>> * Added new patch to set EDID_I2C_ADDR register before doing
>> EDID read.
>>
>> Cc: David Airlie <airlied@...ux.ie>
>> Cc: Archit Taneja <architt@...eaurora.org>
>> Cc: Wolfram Sang <wsa+renesas@...g-engineering.com>
>> Cc: Lars-Peter Clausen <lars@...afoo.de>
>> Cc: Laurent Pinchart <laurent.pinchart@...asonboard.com>
>> Cc: dri-devel@...ts.freedesktop.org
>>
>> Archit Taneja (1):
>> drm/bridge: adv7511: Enable HPD interrupts to support hotplug and
>> improve monitor detection
>>
>> John Stultz (5):
>> drm/bridge: adv7511: Use work_struct to defer hotplug handing to out
>> of irq context
>> drm/bridge: adv7511: Switch to using drm_kms_helper_hotplug_event()
>> drm/bridge: adv7511: Rework adv7511_power_on/off() so they can be
>> reused internally
>> drm/bridge: adv7511: Reuse __adv7511_power_on/off() when probing EDID
>> drm/bridge: adv7511: Re-write the i2c address before EDID probing
>>
>> drivers/gpu/drm/bridge/adv7511/adv7511.h | 2 +
>> drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 67
>> ++++++++++++++++++++-------- 2 files changed, 51 insertions(+), 18
>> deletions(-)
>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists