lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170119002933.7529-1-code@mmayer.net>
Date:   Wed, 18 Jan 2017 16:29:31 -0800
From:   Markus Mayer <code@...yer.net>
To:     Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...eaurora.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Viresh Kumar <viresh.kumar@...aro.org>,
        "Rafael J . Wysocki" <rjw@...ysocki.net>,
        Arnd Bergmann <arnd@...db.de>
Cc:     Markus Mayer <mmayer@...adcom.com>,
        Broadcom Kernel List <bcm-kernel-feedback-list@...adcom.com>,
        Linux Clock List <linux-clk@...r.kernel.org>,
        Power Management List <linux-pm@...r.kernel.org>,
        Device Tree List <devicetree@...r.kernel.org>,
        ARM Kernel List <linux-arm-kernel@...ts.infradead.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: [PATCH v5 0/2] cpufreq: brcmstb-cpufreq: CPUfreq driver for older Broadcom STB SoCs

From: Markus Mayer <mmayer@...adcom.com>

This CPUfreq driver provides basic frequency scaling for older Broadcom
STB SoCs that do not use AVS firmware with DVFS support. There is no
support for voltage scaling.

v4 of this patch can be found at: https://patchwork.kernel.org/patch/9482357/

Changes since v4:
  - Simplified (and hopefully clarified) binding document
  - No code changes

v3 of this patch can be found at: https://lkml.org/lkml/2016/11/22/747

Changes since v3:
  - added binding document
  - got rid of calls to __clk_lookup(), using devm_clk_get() instead
  - re-worked clock lookup code a bit, along with switching to devm_clk_get()
  - get_frequencies() became a void function, removing the need for some
    error checking
  - fixed CONFIG_ARM_BRCM_AVS_CPUFREQ typo
  - fixed MODULE_DEVICE_TABLE declaration

Markus Mayer (2):
  dt-bindings: brcm: clocks: add binding for brcmstb-cpu-clk-div
  cpufreq: brcmstb-cpufreq: CPUfreq driver for older Broadcom STB SoCs

 .../bindings/clock/brcm,brcmstb-cpu-clk-div.txt    |  27 ++
 MAINTAINERS                                        |   1 +
 drivers/cpufreq/Kconfig.arm                        |  12 +
 drivers/cpufreq/Makefile                           |   1 +
 drivers/cpufreq/brcmstb-cpufreq.c                  | 377 +++++++++++++++++++++
 5 files changed, 418 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/brcm,brcmstb-cpu-clk-div.txt
 create mode 100644 drivers/cpufreq/brcmstb-cpufreq.c

-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ