[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170122121830.10336-1-linus.walleij@linaro.org>
Date: Sun, 22 Jan 2017 13:18:30 +0100
From: Linus Walleij <linus.walleij@...aro.org>
To: linux-arm-kernel@...ts.infradead.org,
Hans Ulli Kroll <ulli.kroll@...glemail.com>,
Florian Fainelli <f.fainelli@...il.com>,
Linus Walleij <linus.walleij@...aro.org>,
Alexandre Courbot <gnurou@...il.com>
Cc: Janos Laube <janos.dev@...il.com>,
Paulius Zaleckas <paulius.zaleckas@...il.com>,
openwrt-devel@...nwrt.org, Arnd Bergmann <arnd@...db.de>,
linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org
Subject: [PATCH 06/22] gpio: add DT bindings for Cortina Gemini GPIO
This adds fairly standard DT bindings for the Cortina Systems
Gemini GPIO controller.
Cc: Janos Laube <janos.dev@...il.com>
Cc: Paulius Zaleckas <paulius.zaleckas@...il.com>
Cc: Hans Ulli Kroll <ulli.kroll@...glemail.com>
Cc: Florian Fainelli <f.fainelli@...il.com>
Cc: devicetree@...r.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
---
Note to self: just apply this to the GPIO tree when discussion is over.
---
.../bindings/gpio/cortina,gemini-gpio.txt | 24 ++++++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/cortina,gemini-gpio.txt
diff --git a/Documentation/devicetree/bindings/gpio/cortina,gemini-gpio.txt b/Documentation/devicetree/bindings/gpio/cortina,gemini-gpio.txt
new file mode 100644
index 000000000000..5c9246c054e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/cortina,gemini-gpio.txt
@@ -0,0 +1,24 @@
+Cortina Systems Gemini GPIO Controller
+
+Required properties:
+
+- compatible : Must be "cortina,gemini-gpio"
+- reg : Should contain registers location and length
+- interrupts : Should contain the interrupt line for the GPIO block
+- gpio-controller : marks this as a GPIO controller
+- #gpio-cells : Should be 2, see gpio/gpio.txt
+- interrupt-controller : marks this as an interrupt controller
+- #interrupt-cells : a standard two-cell interrupt flag, see
+ interrupt-controller/interrupts.txt
+
+Example:
+
+gpio@...00000 {
+ compatible = "cortina,gemini-gpio";
+ reg = <0x4d000000 0x100>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+};
--
2.9.3
Powered by blists - more mailing lists