linux-kernel - [PATCH v2 09/14] MIPS: JZ4780: CI20: Add pinctrl configuration for several drivers

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20170122144947.16158-10-paul@crapouillou.net>
Date:   Sun, 22 Jan 2017 15:49:42 +0100
From:   Paul Cercueil <paul@...pouillou.net>
To:     Linus Walleij <linus.walleij@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Ralf Baechle <ralf@...ux-mips.org>,
        Ulf Hansson <ulf.hansson@...aro.org>
Cc:     Boris Brezillon <boris.brezillon@...e-electrons.com>,
        Thierry Reding <thierry.reding@...il.com>,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
        Maarten ter Huurne <maarten@...ewalker.org>,
        Lars-Peter Clausen <lars@...afoo.de>,
        Paul Burton <paul.burton@...tec.com>,
        linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-mips@...ux-mips.org,
        linux-mmc@...r.kernel.org, linux-mtd@...ts.infradead.org,
        linux-pwm@...r.kernel.org, linux-fbdev@...r.kernel.org,
        james.hogan@...tec.com, Paul Cercueil <paul@...pouillou.net>
Subject: [PATCH v2 09/14] MIPS: JZ4780: CI20: Add pinctrl configuration for several drivers

We set the pin configuration for the jz4780-nand and jz4780-uart
drivers.

Signed-off-by: Paul Cercueil <paul@...pouillou.net>
---
 arch/mips/boot/dts/ingenic/ci20.dts | 60 +++++++++++++++++++++++++++++++++++++
 1 file changed, 60 insertions(+)

v2: Changed the devicetree bindings to match the new driver

diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 1652d8d60b1e..fd138d9978c1 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -29,18 +29,30 @@
 
 &uart0 {
 	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart0>;
 };
 
 &uart1 {
 	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart1>;
 };
 
 &uart3 {
 	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart2>;
 };
 
 &uart4 {
 	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_uart4>;
 };
 
 &nemc {
@@ -61,6 +73,13 @@
 		ingenic,nemc-tAW = <15>;
 		ingenic,nemc-tSTRV = <100>;
 
+		/*
+		 * Only CLE/ALE are needed for the devices that are connected, rather
+		 * than the full address line set.
+		 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pins_nemc>;
+
 		nand@1 {
 			reg = <1>;
 
@@ -69,6 +88,9 @@
 			nand-ecc-mode = "hw";
 			nand-on-flash-bbt;
 
+			pinctrl-names = "default";
+			pinctrl-0 = <&pins_nemc_cs1>;
+
 			partitions {
 				compatible = "fixed-partitions";
 				#address-cells = <2>;
@@ -106,3 +128,41 @@
 &bch {
 	status = "okay";
 };
+
+&pinctrl {
+	pins_uart0: uart0 {
+		function = "uart0";
+		groups = "uart0-data";
+		bias-disable;
+	};
+
+	pins_uart1: uart1 {
+		function = "uart1";
+		groups = "uart1-data";
+		bias-disable;
+	};
+
+	pins_uart2: uart2 {
+		function = "uart2";
+		groups = "uart2-data", "uart2-hwflow";
+		bias-disable;
+	};
+
+	pins_uart4: uart4 {
+		function = "uart4";
+		groups = "uart4-data";
+		bias-disable;
+	};
+
+	pins_nemc: nemc {
+		function = "nemc";
+		groups = "nemc-data", "nemc-cle-ale", "nemc-rd-we", "nemc-frd-fwe";
+		bias-disable;
+	};
+
+	pins_nemc_cs1: nemc-cs1 {
+		function = "nemc-cs1";
+		groups = "nemc-cs1";
+		bias-disable;
+	};
+};
-- 
2.11.0