[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170122144947.16158-12-paul@crapouillou.net>
Date: Sun, 22 Jan 2017 15:49:44 +0100
From: Paul Cercueil <paul@...pouillou.net>
To: Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Ralf Baechle <ralf@...ux-mips.org>,
Ulf Hansson <ulf.hansson@...aro.org>
Cc: Boris Brezillon <boris.brezillon@...e-electrons.com>,
Thierry Reding <thierry.reding@...il.com>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Maarten ter Huurne <maarten@...ewalker.org>,
Lars-Peter Clausen <lars@...afoo.de>,
Paul Burton <paul.burton@...tec.com>,
linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-mips@...ux-mips.org,
linux-mmc@...r.kernel.org, linux-mtd@...ts.infradead.org,
linux-pwm@...r.kernel.org, linux-fbdev@...r.kernel.org,
james.hogan@...tec.com, Paul Cercueil <paul@...pouillou.net>
Subject: [PATCH v2 11/14] mtd: nand: jz4740: Let the pinctrl driver configure the pins
Before, this NAND driver would set itself the configuration of the
chip-select pins for the various NAND banks.
Now that the JZ4740 and similar SoCs have a pinctrl driver, we rely on
the pins being properly configured before the driver probes.
Signed-off-by: Paul Cercueil <paul@...pouillou.net>
---
drivers/mtd/nand/jz4740_nand.c | 23 +----------------------
1 file changed, 1 insertion(+), 22 deletions(-)
v2: No changes
diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
index 5551c36adbdf..0d06a1f07d82 100644
--- a/drivers/mtd/nand/jz4740_nand.c
+++ b/drivers/mtd/nand/jz4740_nand.c
@@ -25,7 +25,6 @@
#include <linux/gpio.h>
-#include <asm/mach-jz4740/gpio.h>
#include <asm/mach-jz4740/jz4740_nand.h>
#define JZ_REG_NAND_CTRL 0x50
@@ -310,34 +309,20 @@ static int jz_nand_detect_bank(struct platform_device *pdev,
uint8_t *nand_dev_id)
{
int ret;
- int gpio;
- char gpio_name[9];
char res_name[6];
uint32_t ctrl;
struct nand_chip *chip = &nand->chip;
struct mtd_info *mtd = nand_to_mtd(chip);
- /* Request GPIO port. */
- gpio = JZ_GPIO_MEM_CS0 + bank - 1;
- sprintf(gpio_name, "NAND CS%d", bank);
- ret = gpio_request(gpio, gpio_name);
- if (ret) {
- dev_warn(&pdev->dev,
- "Failed to request %s gpio %d: %d\n",
- gpio_name, gpio, ret);
- goto notfound_gpio;
- }
-
/* Request I/O resource. */
sprintf(res_name, "bank%d", bank);
ret = jz_nand_ioremap_resource(pdev, res_name,
&nand->bank_mem[bank - 1],
&nand->bank_base[bank - 1]);
if (ret)
- goto notfound_resource;
+ return ret;
/* Enable chip in bank. */
- jz_gpio_set_function(gpio, JZ_GPIO_FUNC_MEM_CS0);
ctrl = readl(nand->base + JZ_REG_NAND_CTRL);
ctrl |= JZ_NAND_CTRL_ENABLE_CHIP(bank - 1);
writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
@@ -377,12 +362,8 @@ static int jz_nand_detect_bank(struct platform_device *pdev,
dev_info(&pdev->dev, "No chip found on bank %i\n", bank);
ctrl &= ~(JZ_NAND_CTRL_ENABLE_CHIP(bank - 1));
writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
- jz_gpio_set_function(gpio, JZ_GPIO_FUNC_NONE);
jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
nand->bank_base[bank - 1]);
-notfound_resource:
- gpio_free(gpio);
-notfound_gpio:
return ret;
}
@@ -503,7 +484,6 @@ static int jz_nand_probe(struct platform_device *pdev)
err_unclaim_banks:
while (chipnr--) {
unsigned char bank = nand->banks[chipnr];
- gpio_free(JZ_GPIO_MEM_CS0 + bank - 1);
jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
nand->bank_base[bank - 1]);
}
@@ -530,7 +510,6 @@ static int jz_nand_remove(struct platform_device *pdev)
if (bank != 0) {
jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
nand->bank_base[bank - 1]);
- gpio_free(JZ_GPIO_MEM_CS0 + bank - 1);
}
}
--
2.11.0
Powered by blists - more mailing lists