[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <58846BB3.5060500@rock-chips.com>
Date: Sun, 22 Jan 2017 16:22:11 +0800
From: Chris Zhong <zyw@...k-chips.com>
To: John Keeping <john@...anate.com>,
Mark Yao <mark.yao@...k-chips.com>
Cc: dri-devel@...ts.freedesktop.org,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 12/26] drm/rockchip: dw-mipi-dsi: prepare panel after
phy init
Hi John
Reviewed-by: Chris Zhong <zyw@...k-chips.com>
On 01/22/2017 12:31 AM, John Keeping wrote:
> Some panels need to be configured with commands sent over the MIPI link,
> which they will do in the prepare hook. Call this after the PHY has
> been initialized so that we are able to send commands to the panel.
>
> Signed-off-by: John Keeping <john@...anate.com>
> ---
> Unchanged in v2
> ---
> drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> index ddbc037e7ced..7ada6d8ed143 100644
> --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
> @@ -896,12 +896,14 @@ static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
> dw_mipi_dsi_dphy_timing_config(dsi);
> dw_mipi_dsi_dphy_interface_config(dsi);
> dw_mipi_dsi_clear_err(dsi);
> - if (drm_panel_prepare(dsi->panel))
> - dev_err(dsi->dev, "failed to prepare panel\n");
>
> dw_mipi_dsi_phy_init(dsi);
> dw_mipi_dsi_wait_for_two_frames(mode);
>
> + dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
> + if (drm_panel_prepare(dsi->panel))
> + dev_err(dsi->dev, "failed to prepare panel\n");
> +
> dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
> drm_panel_enable(dsi->panel);
>
Powered by blists - more mailing lists