linux-kernel - [PATCH] phy: marvell: remove conflicting initializer

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20170123121905.3245589-1-arnd@arndb.de>
Date:   Mon, 23 Jan 2017 13:18:41 +0100
From:   Arnd Bergmann <arnd@...db.de>
To:     Florian Fainelli <f.fainelli@...il.com>
Cc:     Arnd Bergmann <arnd@...db.de>,
        "David S. Miller" <davem@...emloft.net>,
        Andrew Lunn <andrew@...n.ch>,
        Charles-Antoine Couret <charles-antoine.couret@...vision.fr>,
        Clemens Gruber <clemens.gruber@...ruber.com>,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH] phy: marvell: remove conflicting initializer

One line was apparently pasted incorrectly during a new feature patch:

drivers/net/phy/marvell.c:2090:15: error: initialized field overwritten [-Werror=override-init]
   .features = PHY_GBIT_FEATURES,

I'm removing the extraneous line here to avoid the W=1 warning and restore
the previous flags value, and I'm slightly reordering the lines for consistency
to make it less likely to happen again in the future. The ordering in the
array is still not the same as in the structure definition, instead I picked
the order that is most common in this file and that seems to make more sense
here.

Fixes: 0b04680fdae4 ("phy: marvell: Add support for temperature sensor")
Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
 drivers/net/phy/marvell.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 64229976ace1..b5b73ff4329a 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -1900,8 +1900,8 @@ static struct phy_driver marvell_drivers[] = {
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1101",
 		.features = PHY_GBIT_FEATURES,
-		.probe = marvell_probe,
 		.flags = PHY_HAS_INTERRUPT,
+		.probe = marvell_probe,
 		.config_init = &marvell_config_init,
 		.config_aneg = &marvell_config_aneg,
 		.read_status = &genphy_read_status,
@@ -1971,10 +1971,10 @@ static struct phy_driver marvell_drivers[] = {
 		.phy_id = MARVELL_PHY_ID_88E1121R,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1121R",
-		.probe = &m88e1121_probe,
-		.remove = &marvell_remove,
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
+		.probe = &m88e1121_probe,
+		.remove = &marvell_remove,
 		.config_init = &m88e1121_config_init,
 		.config_aneg = &m88e1121_config_aneg,
 		.read_status = &marvell_read_status,
@@ -2085,10 +2085,9 @@ static struct phy_driver marvell_drivers[] = {
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1510",
 		.features = PHY_GBIT_FEATURES | SUPPORTED_FIBRE,
+		.flags = PHY_HAS_INTERRUPT,
 		.probe = &m88e1510_probe,
 		.remove = &marvell_remove,
-		.features = PHY_GBIT_FEATURES,
-		.flags = PHY_HAS_INTERRUPT,
 		.config_init = &m88e1510_config_init,
 		.config_aneg = &m88e1510_config_aneg,
 		.read_status = &marvell_read_status,
@@ -2105,10 +2104,10 @@ static struct phy_driver marvell_drivers[] = {
 		.phy_id = MARVELL_PHY_ID_88E1540,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
 		.name = "Marvell 88E1540",
-		.probe = m88e1510_probe,
-		.remove = &marvell_remove,
 		.features = PHY_GBIT_FEATURES,
 		.flags = PHY_HAS_INTERRUPT,
+		.probe = m88e1510_probe,
+		.remove = &marvell_remove,
 		.config_init = &marvell_config_init,
 		.config_aneg = &m88e1510_config_aneg,
 		.read_status = &marvell_read_status,
-- 
2.9.0