| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 23 Jan 2017 10:11:41 +0530
From: Viresh Kumar <viresh.kumar@...aro.org>
To: Rafael Wysocki <rjw@...ysocki.net>,
Viresh Kumar <vireshk@...nel.org>, Nishanth Menon <nm@...com>,
Stephen Boyd <sboyd@...eaurora.org>
Cc: linaro-kernel@...ts.linaro.org, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org,
Vincent Guittot <vincent.guittot@...aro.org>,
Viresh Kumar <viresh.kumar@...aro.org>
Subject: [PATCH V2 01/12] PM / OPP: Add per OPP table mutex
Add per OPP table lock to protect opp_table->opp_list.
Note that at few places opp_list is used under the rcu_read_lock() and
so a mutex can't be added there for now. This will be fixed by a later
patch.
Signed-off-by: Viresh Kumar <viresh.kumar@...aro.org>
Reviewed-by: Stephen Boyd <sboyd@...eaurora.org>
---
drivers/base/power/opp/core.c | 31 +++++++++++++++++++++++++++----
drivers/base/power/opp/opp.h | 2 ++
2 files changed, 29 insertions(+), 4 deletions(-)
diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 622dd32f8dda..dcebd5efb6a1 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -854,6 +854,7 @@ static struct opp_table *_allocate_opp_table(struct device *dev)
srcu_init_notifier_head(&opp_table->srcu_head);
INIT_LIST_HEAD(&opp_table->opp_list);
+ mutex_init(&opp_table->lock);
/* Secure the device table modification */
list_add_rcu(&opp_table->node, &opp_tables);
@@ -909,6 +910,7 @@ static void _free_opp_table(struct opp_table *opp_table)
/* dev_list must be empty now */
WARN_ON(!list_empty(&opp_table->dev_list));
+ mutex_destroy(&opp_table->lock);
list_del_rcu(&opp_table->node);
call_srcu(&opp_table->srcu_head.srcu, &opp_table->rcu_head,
_kfree_device_rcu);
@@ -969,6 +971,8 @@ static void _kfree_opp_rcu(struct rcu_head *head)
*/
static void _opp_remove(struct opp_table *opp_table, struct dev_pm_opp *opp)
{
+ mutex_lock(&opp_table->lock);
+
/*
* Notify the changes in the availability of the operable
* frequency/voltage list.
@@ -978,6 +982,8 @@ static void _opp_remove(struct opp_table *opp_table, struct dev_pm_opp *opp)
list_del_rcu(&opp->node);
call_srcu(&opp_table->srcu_head.srcu, &opp->rcu_head, _kfree_opp_rcu);
+ mutex_unlock(&opp_table->lock);
+
_remove_opp_table(opp_table);
}
@@ -1007,6 +1013,8 @@ void dev_pm_opp_remove(struct device *dev, unsigned long freq)
if (IS_ERR(opp_table))
goto unlock;
+ mutex_lock(&opp_table->lock);
+
list_for_each_entry(opp, &opp_table->opp_list, node) {
if (opp->rate == freq) {
found = true;
@@ -1014,6 +1022,8 @@ void dev_pm_opp_remove(struct device *dev, unsigned long freq)
}
}
+ mutex_unlock(&opp_table->lock);
+
if (!found) {
dev_warn(dev, "%s: Couldn't find OPP with freq: %lu\n",
__func__, freq);
@@ -1083,7 +1093,7 @@ int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
struct opp_table *opp_table)
{
struct dev_pm_opp *opp;
- struct list_head *head = &opp_table->opp_list;
+ struct list_head *head;
int ret;
/*
@@ -1094,6 +1104,9 @@ int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
* loop, don't replace it with head otherwise it will become an infinite
* loop.
*/
+ mutex_lock(&opp_table->lock);
+ head = &opp_table->opp_list;
+
list_for_each_entry_rcu(opp, &opp_table->opp_list, node) {
if (new_opp->rate > opp->rate) {
head = &opp->node;
@@ -1110,12 +1123,17 @@ int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
new_opp->supplies[0].u_volt, new_opp->available);
/* Should we compare voltages for all regulators here ? */
- return opp->available &&
- new_opp->supplies[0].u_volt == opp->supplies[0].u_volt ? -EBUSY : -EEXIST;
+ ret = opp->available &&
+ new_opp->supplies[0].u_volt == opp->supplies[0].u_volt ? -EBUSY : -EEXIST;
+
+ mutex_unlock(&opp_table->lock);
+ return ret;
}
- new_opp->opp_table = opp_table;
list_add_rcu(&new_opp->node, head);
+ mutex_unlock(&opp_table->lock);
+
+ new_opp->opp_table = opp_table;
ret = opp_debug_create_one(new_opp, opp_table);
if (ret)
@@ -1779,6 +1797,8 @@ static int _opp_set_availability(struct device *dev, unsigned long freq,
goto unlock;
}
+ mutex_lock(&opp_table->lock);
+
/* Do we have the frequency? */
list_for_each_entry(tmp_opp, &opp_table->opp_list, node) {
if (tmp_opp->rate == freq) {
@@ -1786,6 +1806,9 @@ static int _opp_set_availability(struct device *dev, unsigned long freq,
break;
}
}
+
+ mutex_unlock(&opp_table->lock);
+
if (IS_ERR(opp)) {
r = PTR_ERR(opp);
goto unlock;
diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h
index 0a5eb4d1e8f7..105243b06373 100644
--- a/drivers/base/power/opp/opp.h
+++ b/drivers/base/power/opp/opp.h
@@ -131,6 +131,7 @@ enum opp_table_access {
* @rcu_head: RCU callback head used for deferred freeing
* @dev_list: list of devices that share these OPPs
* @opp_list: table of opps
+ * @lock: mutex protecting the opp_list.
* @np: struct device_node pointer for opp's DT node.
* @clock_latency_ns_max: Max clock latency in nanoseconds.
* @shared_opp: OPP is shared between multiple devices.
@@ -163,6 +164,7 @@ struct opp_table {
struct rcu_head rcu_head;
struct list_head dev_list;
struct list_head opp_list;
+ struct mutex lock;
struct device_node *np;
unsigned long clock_latency_ns_max;
--
2.7.1.410.g6faf27b
Powered by blists - more mailing lists